present in the bottom of the CFG triangle, as the transformation isn't
ever valuable if the branch can't be eliminated.
Also, unify some heuristics between SimplifyCFG's multiple
if-converters, for consistency.
This fixes rdar://10627242.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147630 91177308-0d34-0410-b5e6-96231b3b80d8
code can incorrectly move the load across a store. This never
happens in practice today, but only because the current
heuristics accidentally preclude it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147623 91177308-0d34-0410-b5e6-96231b3b80d8
For example,
if (a == b) {
if (a > b) // this is false
Fixes some of the issues on <rdar://problem/10554090>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146822 91177308-0d34-0410-b5e6-96231b3b80d8
into Analysis as a standalone function, since there's no need for
it to be in VMCore. Also, update it to use isKnownNonZero and
other goodies available in Analysis, making it more precise,
enabling more aggressive optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146610 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Brendon Cahoon!
This extends the existing LoopUnroll and LoopUnrollPass. Brendon
measured no regressions in the llvm test suite with -unroll-runtime
enabled. This implementation works by using the existing loop
unrolling code to unroll the loop by a power-of-two (default 8). It
generates an if-then-else sequence of code prior to the loop to
execute the extra iterations before entering the unrolled loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146245 91177308-0d34-0410-b5e6-96231b3b80d8
- Walking over pred_begin/pred_end is an expensive operation.
- PHINodes contain a value for each predecessor anyway.
- While it may look like we used to save a few iterations with the set,
be aware that getIncomingValueForBlock does a linear search on
the values of the phi node.
- Another -5% on ARMDisassembler.cpp (Release build). This was the last
entry in the profile that was obviously wasting time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145937 91177308-0d34-0410-b5e6-96231b3b80d8
- Calling getUser in a loop is much more expensive than iterating over a few instructions.
- Use it instead of the open-coded loop in AddrModeMatcher.
- 5% speedup on ARMDisassembler.cpp Release builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145810 91177308-0d34-0410-b5e6-96231b3b80d8
The callee is usually smaller than the caller, too. This reduces the compile
time of ARMDisassembler.cpp by 32% (Release build). It still takes ages to
compile though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145690 91177308-0d34-0410-b5e6-96231b3b80d8
weak variable are compiled by different compilers, such as GCC and LLVM, while
LLVM may increase the alignment to the preferred alignment there is no reason to
think that GCC will use anything more than the ABI alignment. Since it is the
GCC version that might end up in the final program (as the linkage is weak), it
is wrong to increase the alignment of loads from the global up to the preferred
alignment as the alignment might only be the ABI alignment.
Increasing alignment up to the ABI alignment might be OK, but I'm not totally
convinced that it is. It seems better to just leave the alignment of weak
globals alone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145413 91177308-0d34-0410-b5e6-96231b3b80d8
The right way to check for a binary operation is
cast<BinaryOperator>. The original check: cast<Instruction> &&
numOperands() == 2 would match phi "instructions", leading to an
infinite loop in extreme corner case: a useless phi with operands
[self, constant] that prior optimization passes failed to remove,
being used in the loop by another useless phi, in turn being used by an
lshr or udiv.
Fixes PR11350: runaway iteration assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144935 91177308-0d34-0410-b5e6-96231b3b80d8
instructions.
This doesn't introduce any optimizations we weren't doing before (except
potentially due to pass ordering issues), now passes will eliminate them sooner
as part of their own cleanups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142787 91177308-0d34-0410-b5e6-96231b3b80d8
promoting allocas to preferred alignments that exceed the natural
alignment. This avoids some potentially expensive dynamic stack realignments.
The natural stack alignment is set in target data strings via the "S<size>"
option. Size is in bits and must be a multiple of 8. The natural stack alignment
defaults to "unspecified" (represented by a zero value), and the "unspecified"
value does not prevent any alignment promotions. Target maintainers that care
about avoiding promotions should explicitly add the "S<size>" option to their
target data strings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141599 91177308-0d34-0410-b5e6-96231b3b80d8
This handles the case in which LSR rewrites an IV user that is a phi and
splits critical edges originating from a switch.
Fixes <rdar://problem/6453893> LSR is not splitting edges "nicely"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141059 91177308-0d34-0410-b5e6-96231b3b80d8
extract the landing pad block. Otherwise, there will be a situation where the
invoke's unwind edge lands on a non-landing pad.
We also forbid the user from extracting the landing pad block by itself. Again,
this is not a valid transformation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140083 91177308-0d34-0410-b5e6-96231b3b80d8
In theory this could be extended to other instructions, eg. division by zero, but it's likely that it will "miscompile" some code because people depend on div by zero not trapping. NULL pointer dereference usually leads to a crash so we should be on the safe side.
This shrinks the size of a Release clang by 16k on x86_64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138618 91177308-0d34-0410-b5e6-96231b3b80d8
We have to be careful when splitting the landing pad block, because the
landingpad instruction is required to remain as the first non-PHI of an invoke's
unwind edge. To retain this, we split the block into two blocks, moving the
predecessors within the loop to one block and the remaining predecessors to the
other. The landingpad instruction is cloned into the new blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138015 91177308-0d34-0410-b5e6-96231b3b80d8
SplitLandingPadPredecessors is similar to SplitBlockPredecessors in that it
splits the current block and attaches a set of predecessors to the new basic
block. However, it differs from SplitBlockPredecessors in that it's specifically
designed to handle landing pad blocks.
Two new basic blocks are created: one that is has the vector of predecessors as
its predecessors and one that has the remaining predecessors as its
predecessors. Those two new blocks then receive a cloned copy of the landingpad
instruction from the original block. The landingpad instructions are joined in a
PHI, etc. Like SplitBlockPredecessors, it updates the LLVM IR, AliasAnalysis,
DominatorTree, DominanceFrontier, LoopInfo, and LCCSA analyses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138014 91177308-0d34-0410-b5e6-96231b3b80d8
One way to exit the loop is through an unwind edge. However, that may involve
splitting the critical edge of the landing pad, which is non-trivial. Prevent
the transformation from rewriting the landing pad exit loop block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137871 91177308-0d34-0410-b5e6-96231b3b80d8
This commit includes a mention of the landingpad instruction, but it's not
changing the behavior around it. I think the current behavior is correct,
though. Bill, can you double-check that?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137691 91177308-0d34-0410-b5e6-96231b3b80d8
This builds off of the current scheme, but instead of llvm.eh.exception and
llvm.eh.selector, it uses the landingpad instruction. And instead of
llvm.eh.resume, it uses the resume instruction.
Because of the invariants in the landing pad instruction, a lot of code that's
currently needed to find the appropriate intrinsic calls for an invoke
instruction won't be needed once we go to the new EH scheme. The "FIXME"s tell
us what to remove after we switch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137576 91177308-0d34-0410-b5e6-96231b3b80d8
Also, my apologies for spoiling the autocomplete on SimplifyInstructions.cpp. I couldn't think of a better filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137229 91177308-0d34-0410-b5e6-96231b3b80d8
based on ScalarEvolution without changing the induction variable phis.
This utility is the main tool of IndVarSimplifyPass, but the pass also
restructures induction variables in strange ways that are sensitive to
pass ordering. This provides a way for other loop passes to simplify
new uses of induction variables created during transformation. The
utility may be used by any pass that preserves ScalarEvolution. Soon
LoopUnroll will use it.
The net effect in this checkin is to cleanup the IndVarSimplify pass
by factoring out the SimplifyIndVar algorithm into a standalone utility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137197 91177308-0d34-0410-b5e6-96231b3b80d8
