Teach autoconf/configure.ac to AC_SUBST several additional values in
Makefile.config to make them available to Makefile code. These will
be useful to generate CMake package modules from the Makefile build.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201052 91177308-0d34-0410-b5e6-96231b3b80d8
ISSUE:
On Ubuntu 12.04 LTS, arc4random is provided by libbsd.so, which is a
transitive dependency of libedit. If a system had libedit on it that
was implemented in terms of libbsd.so, then the arc4random test,
previously implemented as a linker test, would succeed with -ledit.
However, on Ubuntu this would also require a #include <bsd/stdlib.h>.
This caused a build breakage on configure-based Ubuntu 12.04 with
libedit installed.
FIX:
This fix changes configure to test for arc4random by searching for it
in the standard header files. On Ubuntu 12.04, this test now properly
fails to find arc4random as it is not defined in the default header
locations. It also tweaks the #define names to match the output of the
header check command, which is slightly different than the linker
function check #defines.
I tested the following scenarios:
(1) Ubuntu 12.04 without the libedit package [did not find arc4random,
as expected]
(2) Ubuntu 12.04 with libedit package [properly did not find
arc4random, as expected]
(3) Ubuntu 12.04 with most recent libedit, custom built, and not
dependent on libbsd.so [properly did not find arc4random, as
expected].
(4) FreeBSD 10.0B1 [properly found arc4random, as expected]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200819 91177308-0d34-0410-b5e6-96231b3b80d8
This library will be used by clang-query. I can imagine LLDB becoming another
client of this library, so I think LLVM is a sensible place for it to live.
It wraps libedit, and adds tab completion support.
The code is loosely based on the line editor bits in LLDB, with a few
improvements:
- Polymorphism for retrieving the list of tab completions, based on
the concept pattern from the new pass manager.
- Tab completion doesn't corrupt terminal output if the input covers
multiple lines. Unfortunately this can only be done in a truly horrible
way, as far as I can tell. But since the alternative is to implement our
own line editor (which I don't think LLVM should be in the business of
doing, at least for now) I think it may be acceptable.
- Includes a fallback for the case where the user doesn't have libedit
installed.
Note that this uses C stdio, mainly because libedit also uses C stdio.
Differential Revision: http://llvm-reviews.chandlerc.com/D2200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200595 91177308-0d34-0410-b5e6-96231b3b80d8
which catch buggy versions of libstdc++. While libc++ would pass them,
we don't actually update the state in the configure script to use libc++
when we pass --enable-libcpp, the logic for that is in the
Makefiles. So just completely skip the library test when that configure
flag is passed.
Hopefully this will be enough to fix the darwin bots at last, and thanks
to Duncan Smith for getting things set up so I can watch the bots myself
on lab.llvm.org and see any failures!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199334 91177308-0d34-0410-b5e6-96231b3b80d8
enable flag that selects the C++ standard library to use with the host
toolchain. Otherwise we end up testing the wrong config.
I'm not really happy about this placement, but its pragmatic and should
unblock the Apple builders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199325 91177308-0d34-0410-b5e6-96231b3b80d8
libstdc++v4.6. This is quite hard to test directly, so we test for it by
checking a known missing feature in that version that was added in v4.7.
This should prevent users from upgrading Clang but not GCC and hosting
with a too-old GCC's libstdc++ and getting strange and hard to debug
errors when we switch to C++11 by default.
Also, switch several of the macros I introduced to use AC_LANG_SOURCE
rather than AC_LANG_PROGRAM as we don't need configure's help writing
our main function (and we don't need such a function at all for most of
the tests).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199313 91177308-0d34-0410-b5e6-96231b3b80d8
requires Clang 3.1 or GCC 4.7. If the compiler isn't Clang or GCC, we
don't try to do any sanity checking, but this give us at least
a reasonable baseline of modern compilers.
Also, I'm not claiming that this is the best way to do compiler version
tests. I'm happy for anyone to suggest better ways of doing this test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199182 91177308-0d34-0410-b5e6-96231b3b80d8
Also, so is stacker, llvm-tv, etc. Wow.
But will someone please fess up to what projects/privbracket is and why
our autoconf build supports it?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199179 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The MSVCRT deliberately sends main() code-page specific characters.
This isn't too useful to LLVM as we end up converting the arguments to
UTF-16 and subsequently attempt to use the result as, for example, a
file name. Instead, we need to have the ability to access the Unicode
command line and transform it to UTF-8.
This has the distinct advantage over using the MSVC-specific wmain()
function as our entry point because:
- It doesn't work on cygwin.
- It only work on MinGW with caveats and only then on certain versions.
- We get to keep our entry point as main(). :)
N.B. This patch includes fixes to other parts of lib/Support/Windows
s.t. we would be able to take advantage of getting the Unicode paths.
E.G. clang spawning clang -cc1 would want to give it Unicode arguments.
Reviewers: aaron.ballman, Bigcheese, rnk, ruiu
Reviewed By: rnk
CC: llvm-commits, ygao
Differential Revision: http://llvm-reviews.chandlerc.com/D1834
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192069 91177308-0d34-0410-b5e6-96231b3b80d8
Since r187209, which modified ltdl.m4, I was unable to execute
AutoRegen.sh, getting:
../configure:10779: error: possibly undefined macro: AC_LTDL_FUNC_ARGZ
This commit re-adds AC_LTDL_FUNC_ARGZ to ltdl.m4, as a quick fix. For me, this
corresponds to the configure file currently checked in.
(However, the ltdl library seems to be unused since r74924 in 2009,
except for the use of the LTDL_SHLIB_EXT macro in
bugpoint(?). Therefore, the right solution seems to try to get rid of
the local ltdl.m4 file, specified by autoconf/README.TXT.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190677 91177308-0d34-0410-b5e6-96231b3b80d8
- We do some nasty things w.r.t. installing or overriding signal handlers in
order to improve our crash recovery support or interaction with crash
reporting software, and those things are not necessarily appropriate when
LLVM is being linked into a client application that has its own ideas about
how to do things. This gives those clients a way to disable that handling at
build time.
- Currently, the code this guards is all Apple specific, but other platforms
might have the same concerns so I went for a more generic configure
name. Someone who is more familiar with library embedding on Windows can
handle choosing which of the Windows/Signals.inc behaviors might make sense
to go under this flag.
- This also fixes the proper autoconf'ing of ENABLE_BACKTRACES. The code
expects it to be undefined when disabled, but the autoconf check was just
defining it to 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189694 91177308-0d34-0410-b5e6-96231b3b80d8
I don't actually have a version of autoconf so I edited configure directly
as well. It's copy-pasted so I think there was little margin for error.
See also Clang-side dependency graph changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189026 91177308-0d34-0410-b5e6-96231b3b80d8
curses.h). Finding these headers is next to impossible. For example, on
Debian systems libtinfo-dev provides the terminfo reading library we
want, but *not* term.h. For the header, you have to use libncurses-dev.
And libncursesw-dev provides a *different* term.h in a different
location!
These headers aren't worth it. We want two functions the signatures of
which are clearly spec'ed in sys-v and other documentation. Just declare
them ourselves and call them. This should fix some debian builders and
provide better support for "minimal" debian systems that do want color
autodetection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188165 91177308-0d34-0410-b5e6-96231b3b80d8
library for color support detection. This still will use a curses
library if that is all we have available on the system. This change
tries to use a smaller subset of the curses library, specifically the
subset that is on some systems split off into a separate library. For
example, if you install ncurses configured --with-tinfo, a 'libtinfo' is
install that provides just the terminfo querying functionality. That
library is now used instead of curses when it is available.
This happens to fix a build error on systems with that library because
when we tried to link ncurses into the binary, we didn't pull tinfo in
as well. =]
It should also provide an easy path for supporting the NetBSD
libterminfo library, but as I don't have access to a NetBSD system I'm
leaving adding that support to those folks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188160 91177308-0d34-0410-b5e6-96231b3b80d8
using it to detect whether or not a terminal supports colors. This
replaces a particularly egregious hack that merely compared the TERM
environment variable to "dumb". That doesn't really translate to
a reasonable experience for users that have actually ensured their
terminal's capabilities are accurately reflected.
This makes testing a terminal for color support somewhat more expensive,
but it is called very rarely anyways. The important fast path when the
output is being piped somewhere is already in place.
The global lock may seem excessive, but the spec for calling into curses
is *terrible*. The whole library is terrible, and I spent quite a bit of
time looking for a better way of doing this before convincing myself
that this was the fundamentally correct way to behave. The damage of the
curses library is very narrowly confined, and we continue to use raw
escape codes for actually manipulating the colors which is a much sane
system than directly using curses here (IMO).
If this causes trouble for folks, please let me know. I've tested it on
Linux and will watch the bots carefully. I've also worked to account for
the variances of curses interfaces that I could finde documentation for,
but that may not have been sufficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187874 91177308-0d34-0410-b5e6-96231b3b80d8
Recent versions of the OS X linker support this but follow the existing
OS X linker convention of using an underscore in the option name, i.e.,
-export_dynamic. Rather than changing our configure scripts to check for
that alternate spelling, it is simpler to just use the compiler's -rdynamic
option and let it deal with translating that to the appropriate linker
option. One potential disadvantage of this approach is that the compiler
will typically ignore -rdynamic on platforms where it is not supported, so
the HAVE_LINK_EXPORT_DYNAMIC in config.h will not necessarily show whether
that option has any effect or not. I don't see any in-tree uses of that
macro, so I'm assuming it is OK.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187686 91177308-0d34-0410-b5e6-96231b3b80d8
On Windows, this improves clean cmake configuration time on my
workstation from 1m58s to 1m32s, which is pretty significant. There's
probably more that can be done here, but this is the low hanging fruit.
Eric volunteered to regenerate ./configure for me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187209 91177308-0d34-0410-b5e6-96231b3b80d8
This patch provides basic support for powerpc64le as an LLVM target.
However, use of this target will not actually generate little-endian
code. Instead, use of the target will cause the correct little-endian
built-in defines to be generated, so that code that tests for
__LITTLE_ENDIAN__, for example, will be correctly parsed for
syntax-only testing. Code generation will otherwise be the same as
powerpc64 (big-endian), for now.
The patch leaves open the possibility of creating a little-endian
PowerPC64 back end, but there is no immediate intent to create such a
thing.
The LLVM portions of this patch simply add ppc64le coverage everywhere
that ppc64 coverage currently exists. There is nothing of any import
worth testing until such time as little-endian code generation is
implemented. In the corresponding Clang patch, there is a new test
case variant to ensure that correct built-in defines for little-endian
code are generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187179 91177308-0d34-0410-b5e6-96231b3b80d8
This kind of simplification is sometimes useful, but in general it's not correct.
As GNU/kFreeBSD is an hybrid system, for kernel-related issues we want to match the
build definitions used for FreeBSD, whereas for userland-related issues we want to
match the definitions used for other systems with Glibc.
The current modification adjusts the build system so that they can be distinguished,
and explicitly adds GNU/kFreeBSD to the build checks in which it belongs.
Fixes bug #16444.
Patch by Robert Millan in the context of Debian.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185311 91177308-0d34-0410-b5e6-96231b3b80d8
when building llvm. This saves quite a bit of time and space when
linking. Please report any problems via bugzilla.
Caveats:
a) This will only work on linux
b) This requires a fairly new binutils
c) This requires a fairly new gdb
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184808 91177308-0d34-0410-b5e6-96231b3b80d8
The r600 backend has been in tree for some time now. Marking it as
non-experimental to avoid accidental breakage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182442 91177308-0d34-0410-b5e6-96231b3b80d8
This patch finally enables the SystemZ target in the default build
(with --enable-targets=all).
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181209 91177308-0d34-0410-b5e6-96231b3b80d8
This patch wires up the SystemZ target in configure, so that it can now be
built using --enable-targets=systemz. It is not yet included in the default
build (--enable-targets=all); this will be done by a follow-up patch.
Patch by Richard Sandiford.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181208 91177308-0d34-0410-b5e6-96231b3b80d8
The intended semantics mirror autoconf, where the user is able to
specify a host triple, but if it's left to the build system then
"config.guess" is invoked for the default.
This also renames the LLVM_HOSTTRIPLE define to LLVM_HOST_TRIPLE to
fit in with the style of the surrounding defines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181112 91177308-0d34-0410-b5e6-96231b3b80d8
