It emits *millions of warnings* during selfhosting LTO build, to choke the buildbot with gigbytes of log.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230885 91177308-0d34-0410-b5e6-96231b3b80d8
This class is responsible for getting the linked data to the
disk in the appropriate form. Today it it an empty shell that
just instantiates an MC layer.
As we do not put anything in the resulting file yet, we just
check it has the right architecture (and check that -o does
the right thing).
To be able to create all the components, this commit adds a
few dependencies to llvm-dsymutil, namely all-targets, MC and
AsmPrinter.
Also add a -no-output option, so that tests that do not need
the binary result can continue to run even if they do not have
the required target linked in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230824 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
The gold plugin never calls MaterializeModule, so any old debug info
was not deleted and could cause crashes.
Now that it is being "upgraded", the plugin also has to handle warnings
and create Modules with a nice id (it shows in the warning).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230655 91177308-0d34-0410-b5e6-96231b3b80d8
When multiple regions start on the same line, llvm-cov was just
showing the count of the last one as the line count. This can be
confusing and misleading for things like one-liner loops, where the
count at the end isn't very interesting, or even "if" statements with
an opening brace at the end of the line.
Instead, use the maximum of all of the region start counts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230263 91177308-0d34-0410-b5e6-96231b3b80d8
with the Mach-O S_LITERAL_POINTERS section type.
Also fix the printing of the leading addresses for literal sections to be consistent and
not print the 0x prefix. Updated test cases to match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229548 91177308-0d34-0410-b5e6-96231b3b80d8
GNU ld sets default, not hidden, visibility on local symbols.
Having default or hidden visibility on local symbols makes no difference in run-time behavior.
Patch by: H.J. Lu <hjl.tools@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229297 91177308-0d34-0410-b5e6-96231b3b80d8
a gold binary explicitly. Substitute this binary into the tests rather
than just directly executing the 'ld' binary.
This should allow folks to inject a cross compiling gold binary, or in
my case to use a gold binary built and installed somewhere other than
/usr/bin/ld. It should also allow the tests to find 'ld.gold' so that
things work even if gold isn't the default on the system.
I've only stubbed out support in the makefile to preserve the existing
behavior with none of the fancy logic. If someone else wants to add
logic here, they're welcome to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229251 91177308-0d34-0410-b5e6-96231b3b80d8
This code didn't really make sense as is. If a filename is passed in,
the user obviously wants the coverage *for that file*, not *for
everything*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229217 91177308-0d34-0410-b5e6-96231b3b80d8
With this commit, llvm-dsymutil learns how to choose which DIEs
it will link in the final output and which ones it won't. This
is based on the 'valid relocation' information that has been
built in the previous commits.
The test only tests that we choose the right 'root DIEs'. The
selection algorithm (and especially the part that walk the
dependencies of a root DIE) lacks a bit test coverage. This
will be much easier to cover when we output actual Dwarf and
thus can use llvm-dwarfdump to verify the structure of the
emitted DIE trees. I'll add more tests then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229183 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Move calls to get_input_file and release_input_file out of
getModuleForFile(). Otherwise release_input_file may end up
unmapping a view of the file while the view is still being
used by the Module (on 32-bit hosts).
Fix for PR22482.
Test Plan: Add test using --no-map-whole-files.
Reviewers: rafael, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7539
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228842 91177308-0d34-0410-b5e6-96231b3b80d8
Add a trivial binary (int main() { return 0; }) built for Windows on ARM to
ensure that we can correctly identify ARM_MOV32(T) base relocations. Addresses
post-commit review comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227673 91177308-0d34-0410-b5e6-96231b3b80d8
segname,sectname to specify a Mach-O section to print. The printing is based on
the section type or section attributes.
The printing of the module initialization and termination section types is printed
with this change. Printing of other section types will be added next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227649 91177308-0d34-0410-b5e6-96231b3b80d8
It's an empty shell for now. It's main method just opens the debug
map objects and parses their Dwarf info. Test that we at least do
that correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227337 91177308-0d34-0410-b5e6-96231b3b80d8
It will be needed to instantiate the Target object that we will
use to create all the MC objects for the dwarf emission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226525 91177308-0d34-0410-b5e6-96231b3b80d8
while I once again try to figure out why only the clang-cmake-armv7-a15-full bot
is getting that value wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226345 91177308-0d34-0410-b5e6-96231b3b80d8
removing the macho-archive-headers.test added with r226228 that it is
failing on for now while I try to figure out what is going on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226241 91177308-0d34-0410-b5e6-96231b3b80d8
This can happen if:
* It is present in a comdat in one file.
* It is not present in the comdat of the file that is kept.
* Is is not used.
This should fix the LTO boostrap.
Thanks to Takumi NAKAMURA for setting up the bot!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225983 91177308-0d34-0410-b5e6-96231b3b80d8
options other than just -disassemble so that universal files can be used with other
options combined with -arch options.
No functional change to existing options and use. One test case added for the
additional functionality with a universal file an a -arch option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225383 91177308-0d34-0410-b5e6-96231b3b80d8
In order to make comdats always explicit in the IR, we decided to make
the syntax a bit more compact for the case of a GlobalObject in a
comdat with the same name.
Just dropping the $name causes problems for
@foo = globabl i32 0, comdat
$bar = comdat ...
and
declare void @foo() comdat
$bar = comdat ...
So the syntax is changed to
@g1 = globabl i32 0, comdat($c1)
@g2 = globabl i32 0, comdat
and
declare void @foo() comdat($c1)
declare void @foo() comdat
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225302 91177308-0d34-0410-b5e6-96231b3b80d8
This object is meant to own the ObjectFiles and their underlying
MemoryBuffer. It is basically the equivalent of an OwningBinary
except that it efficiently handles Archives. It is optimized for
efficiently providing mappings of members of the same archive when
they are opened successively (which is standard in Darwin debug
maps, objects from the same archive will be contiguous).
Of course, the BinaryHolder will also be used by the DWARF linker
once it is commited, but for now only the debug map parser uses it.
With this change, you can run llvm-dsymutil on your Darwin debug build
of clang and get a complete debug map for it.
Differential Revision: http://reviews.llvm.org/D6690
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225207 91177308-0d34-0410-b5e6-96231b3b80d8
Claim conformance to version 2.09 of the ARM ABI.
This build attribute must be emitted first amongst the build attributes when
written to an object file. This is to simplify conformance detection by
consumers.
Change-Id: If9eddcfc416bc9ad6e5cc8cdcb05d0031af7657e
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225166 91177308-0d34-0410-b5e6-96231b3b80d8
This enhances llvm-readobj to print out the COFF export table, similar to the
-coff-import option. This is useful for testing in lld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225120 91177308-0d34-0410-b5e6-96231b3b80d8
