Summary:
Improved warning message when using .cpload inside a reorder section and added an error message for using .cpload with Mips16 enabled.
Modified the tests to fit with the changes mentioned above, added a test-case for the N32 ABI in cpload.s and did some reformatting to make the tests easier to read.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5465
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221447 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Appropriately set/clear the FeatureBit for Mips16 when these assembler directives are used and also emit ".set nomips16" (previously, only ".set mips16" was being emitted).
These improvements allow for better testing of the .cpload/.cprestore assembler directives (which are not supposed to work when Mips16 is enabled).
Test Plan: The test is bare-bones because there are no MC tests for Mips16 instructions (there's only one, which checks that the Mips16 ELF header flag gets set), and that suggests to me that it has not been implemented yet in the IAS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5462
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221277 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The register names t4-t7 are not available in the N32 and N64 ABIs.
This patch prints a warning, when those names are used in N32/64,
along with a fix-it with the correct register names.
Patch by Vasileios Kalintiris
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5272
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218989 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Changed error messages to be more informative and to resemble other clang/llvm error messages (first letter is lower case, no ending punctuation) and updated corresponding tests.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5065
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217873 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is used to reset the assembler options to their initial values.
Assembly programmers use it in conjunction with the ".set mipsX" directives.
This patch depends on the .set push/pop directive (http://reviews.llvm.org/D4821).
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4957
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217438 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These directives are used to save the current assembler options (in the case of ".set push") and restore the previously saved options (in the case of ".set pop").
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4821
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217432 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Found a couple of cases where unsigned was still being used. These two should be the last ones in the (entire) Mips backend.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217257 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is similar to ".set mipsX".
It is used to change the CPU target of the assembler, enabling it to accept instructions for a specific CPU.
This patch only implements the r4000 CPU (which is treated internally as generic mips3) and the generic ISAs.
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215978 91177308-0d34-0410-b5e6-96231b3b80d8
ARM in particular is getting dangerously close to exceeding 32 bits worth of
possible subtarget features. When this happens, various parts of MC start to
fail inexplicably as masks get truncated to "unsigned".
Mostly just refactoring at present, and there's probably no way to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215887 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This pseudo-instruction allows the programmer to load an address from a symbolic expression into a register.
Patch by David Chisnall.
His work was sponsored by: DARPA, AFRL
I've made some minor changes to the original, such as improving the formatting and adding some comments, and I've also added a test case.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215630 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
getCanHaveModuleDir() is renamed to isModuleDirectiveAllowed(), and
setCanHaveModuleDir() is renamed to forbidModuleDirective() since it is only
ever given a false argument.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4885
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215628 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Matheus Almeida and Toma Tabacu
The lld test failure on the previous attempt to commit was caused by the
addition of the .pdr section causing the offsets it was checking to change.
This has been fixed by removing the .ent/.end directives from that test since
they weren't really needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215535 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These directives are used to toggle whether the assembler accepts MSA-specific instructions or not.
Patch by Matheus Almeida and Toma Tabacu.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4783
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215099 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch also fixes an issue with the way the Mips assembler enables/disables architecture
features. Before this patch, the assembler never disabled feature bits. For example,
.set mips64
.set mips32r2
would result in the 'OR' of mips64 with mips32r2 feature bits which isn't right.
Unfortunately this isn't trivial to fix because there's not an easy way to clear
feature bits as the algorithm in MCSubtargetInfo (ToggleFeature) only clears the bits
that imply the feature being cleared and not the implied bits by the feature (there's a
better explanation to the code I added).
Patch by Matheus Almeida and updated by Toma Tabacu
Reviewers: vmedic, matheusalmeida, dsanders
Reviewed By: dsanders
Subscribers: tomatabacu, llvm-commits
Differential Revision: http://reviews.llvm.org/D4123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214709 91177308-0d34-0410-b5e6-96231b3b80d8
Options struct and move the comment to inMips16HardFloat. Use the
fact that we now know whether or not we cared about soft float to
set the libcalls.
Accordingly rename mipsSEUsesSoftFloat to abiUsesSoftFloat and
propagate since it's no longer CPU specific.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213335 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212717 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow on to r212519 to improve the encapsulation and limit the scope of the enums.
Also merged two very similar parser functions, fixed a bug where ASE's
were not being reported, and marked CPR1's as being 128-bit when MSA is
enabled.
Differential Revision: http://reviews.llvm.org/D4384
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212522 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Some small modifications to the original patch: we now error if
it's not possible to expand an instruction (mips-expansions-bad.s has some
examples). Added some comments to the expansions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211271 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The functions that do the expansion now return false on success and true otherwise. This is so
we can catch some errors during the expansion (e.g.: immediate too large). The next patch adds some test cases.
Reviewers: vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4214
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211269 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211169 91177308-0d34-0410-b5e6-96231b3b80d8
