See PR19608 for the details but to summarize it was easy to modify the .ll
file to get the desired def-use ordering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207887 91177308-0d34-0410-b5e6-96231b3b80d8
This moves most of GlobalOpt's constructor optimization
code out of GlobalOpt into Transforms/Utils/CDtorUtils.{h,cpp}. The
public interface is a single function OptimizeGlobalCtorsList() that
takes a predicate returning which constructors to remove.
GlobalOpt calls this with a function that statically evaluates all
constructors, just like it did before. This part of the change is
behavior-preserving.
Also add a call to this from GlobalDCE with a filter that removes global
constructors that contain a "ret" instruction and nothing else – this
fixes PR19590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207856 91177308-0d34-0410-b5e6-96231b3b80d8
address to AnalyzeLoadFromClobberingLoad. This fixes a bug in load-PRE where
PRE is applied to a load that is not partially redundant.
<rdar://problem/16638765>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207853 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization merges the common part of a group of GEPs, so we can compute
each pointer address by adding a simple offset to the common part.
The optimization is currently only enabled for the NVPTX backend, where it has
a large payoff on some benchmarks.
Review: http://reviews.llvm.org/D3462
Patch by Jingyue Wu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207783 91177308-0d34-0410-b5e6-96231b3b80d8
=[
Turns out that this was the root cause of PR19621. We found a crasher
only recently (likely due to improvements elsewhere in the SLP
vectorizer) but the reduced test case failed all the way back to here.
I've confirmed that reverting this patch both fixes the reduced test
case in PR19621 and the actual source file that led to it, so it seems
to really be rooted here. I've replied to the commit thread with
discussion of my (feeble) attempts to debug this. Didn't make it very
far, so reverting now that we have a good test case so that things can
get back to healthy while the debugging carries on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207746 91177308-0d34-0410-b5e6-96231b3b80d8
There is no need to check if we want to hoist the immediate value of an
shift instruction. Simply return TCC_Free right away.
This change is like r206101, but for X86.
rdar://problem/16190769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207692 91177308-0d34-0410-b5e6-96231b3b80d8
The instcomine logic to handle vpermilvar's pd and 256 variants was incorrect.
The _256 variants have indexes into the individual 128 bit lanes and in all
cases it also has to mask out unused bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207577 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the vectorization remarks to also inform when
vectorization is possible but not beneficial.
Added tests to exercise some loop remarks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207574 91177308-0d34-0410-b5e6-96231b3b80d8
clang directly from the LLVM test suite! That doesn't work. I've
followed up on the review thread to try and get a viable solution sorted
out, but trying to get the tree clean here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207462 91177308-0d34-0410-b5e6-96231b3b80d8
by avoiding inlining massive switches merely because they have no
instructions in them. These switches still show up where we fail to form
lookup tables, and in those cases they are actually going to cause
a very significant code size hit anyways, so inlining them is not the
right call. The right way to fix any performance regressions stemming
from this is to enhance the switch-to-lookup-table logic to fire in more
places.
This makes PR19499 about 5x less bad. It uncovers a second compile time
problem in that test case that is unrelated (surprisingly!).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207403 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
Repaired r207302.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207309 91177308-0d34-0410-b5e6-96231b3b80d8
more than 1 instruction. The caller need to be aware of this
and adjust instruction iterators accordingly.
rdar://16679376
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207302 91177308-0d34-0410-b5e6-96231b3b80d8
right intrinsics.
A packed logical shift right with a shift count bigger than or equal to the
element size always produces a zero vector. In all other cases, it can be
safely replaced by a 'lshr' instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207299 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this use from the new testcase:
LSR Use: Kind=ICmpZero, Offsets={0}, widest fixup type: i32
reg({1000,+,-1}<nw><%for.body>)
-3003 + reg({3,+,3}<nw><%for.body>)
-1001 + reg({1,+,1}<nuw><nsw><%for.body>)
-1000 + reg({0,+,1}<nw><%for.body>)
-3000 + reg({0,+,3}<nuw><%for.body>)
reg({-1000,+,1}<nw><%for.body>)
reg({-3000,+,3}<nsw><%for.body>)
This is the last use we consider for a solution in SolveRecurse, so CurRegs is
a large set. (CurRegs is the set of registers that are needed by the
previously visited uses in the in-progress solution.)
ReqRegs is {
{3,+,3}<nw><%for.body>,
{1,+,1}<nuw><nsw><%for.body>
}
This is the intersection of the regs used by any of the formulas for the
current use and CurRegs.
Now, the code requires a formula to contain *all* these regs (the comment is
simply wrong), otherwise the formula is immediately disqualified. Obviously,
no formula for this use contains two regs so they will all get disqualified.
The fix modifies the check to allow the formula in this case. The idea is
that neither of these formulae is introducing any new registers which is the
point of this early pruning as far as I understand.
In terms of set arithmetic, we now allow formulas whose used regs are a subset
of the required regs not just the other way around.
There are few more loops in the test-suite that are now successfully LSRed. I
have benchmarked those and found very minimal change.
Fixes <rdar://problem/13965777>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207271 91177308-0d34-0410-b5e6-96231b3b80d8
override the default cold threshold.
When we use command line argument to set the inline threshold, the default
cold threshold will not be used. This is in line with how we use
OptSizeThreshold. When we want a higher threshold for all functions, we
do not have to set both inline threshold and cold threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207245 91177308-0d34-0410-b5e6-96231b3b80d8
This excludes avx512 as I don't have hardware to verify. It excludes _dq
variants because they are represented in the IR as <{2,4} x i64> when it's
actually a byte shift of the entire i{128,265}.
This also excludes _dq_bs as they aren't at all supported by the backend.
There are also no corresponding instructions in the ISA. I have no idea why
they exist...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207058 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Since the upper 64 bits of the destination register are undefined when
performing this operation, we can substitute it and let the optimizer
figure out that only a copy is needed.
Also added range merging, if an instruction copies a range that can be
merged with a previous copied range.
Added test cases for both optimizations.
Reviewers: grosbach, nadav
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3357
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207055 91177308-0d34-0410-b5e6-96231b3b80d8
In the case where the constant comes from a cloned cast instruction, the
materialization code has to go before the cloned cast instruction.
This commit fixes the method that finds the materialization insertion point
by making it aware of this case.
This fixes <rdar://problem/15532441>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206913 91177308-0d34-0410-b5e6-96231b3b80d8
With a constant mask a vpermil* is just a shufflevector. This patch implements
that simplification. This allows us to produce denser code. It should also
allow more folding down the line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206801 91177308-0d34-0410-b5e6-96231b3b80d8
The -tailcallelim pass should be checking if byval or inalloca args can
be captured before marking calls as tail calls. This was the real root
cause of PR7272.
With a better fix in place, revert the inliner change from r105255. The
test case it introduced still passes and has been moved to
test/Transforms/Inline/byval-tail-call.ll.
Reviewers: chandlerc
Differential Revision: http://reviews.llvm.org/D3403
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206789 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This prevents the discriminator generation pass from triggering if
the DWARF version being used in the module is prior to 4.
Reviewers: echristo, dblaikie
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206507 91177308-0d34-0410-b5e6-96231b3b80d8
After some discussions the preferred semantics of
the always_inline attribute is
inline always when the compiler can determine
that it it safe to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206487 91177308-0d34-0410-b5e6-96231b3b80d8
Still only 32-bit ARM using it at this stage, but the promotion allows
direct testing via opt and is a reasonably self-contained patch on the
way to switching ARM64.
At this point, other targets should be able to make use of it without
too much difficulty if they want. (See ARM64 commit coming soon for an
example).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206485 91177308-0d34-0410-b5e6-96231b3b80d8
is set even when it contains a indirect branch.
The attribute overrules correctness concerns
like the escape of a local block address.
This is for rdar://16501761
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206429 91177308-0d34-0410-b5e6-96231b3b80d8
Implements the various TTI functions to enable constant hoisting on PPC. The
only significant test-suite change is this:
MultiSource/Benchmarks/VersaBench/bmm/bmm - 20% speedup
(which essentially reverses the slowdown from r206120).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206141 91177308-0d34-0410-b5e6-96231b3b80d8
If multiplication involves zero-extended arguments and the result is
compared as in the patterns:
%mul32 = trunc i64 %mul64 to i32
%zext = zext i32 %mul32 to i64
%overflow = icmp ne i64 %mul64, %zext
or
%overflow = icmp ugt i64 %mul64 , 0xffffffff
then the multiplication may be replaced by call to umul.with.overflow.
This change fixes PR4917 and PR4918.
Differential Revision: http://llvm-reviews.chandlerc.com/D2814
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206137 91177308-0d34-0410-b5e6-96231b3b80d8
There is no need to check if we want to hoist the immediate value of an
shift instruction. Simply return TCC_Free right away.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206101 91177308-0d34-0410-b5e6-96231b3b80d8
