- Disables 'Built on ...' in 'foo --version'.
- Disables timestamps from being embedded into .dir files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103423 91177308-0d34-0410-b5e6-96231b3b80d8
NOTE: 2nd part changeset for cfe trunk to follow.
*** PRE-PATCH ISSUES ADDRESSED
- clang api docs fail build from objdir
- clang/llvm api docs collide in install PREFIX/
- clang/llvm main docs collide in install
- clang/llvm main docs have full of hard coded destination
assumptions and make use of absolute root in static html files;
namely CommandGuide tools hard codes a website destination
for cross references and some html cross references assume
website root paths
*** IMPROVEMENTS
- bumped Doxygen from 1.4.x -> 1.6.3
- splits llvm/clang docs into 'main' and 'api' (doxygen) build trees
- provide consistent, reliable doc builds for both main+api docs
- support buid vs. install vs. website intentions
- support objdir builds
- document targets with 'make help'
- correct clean and uninstall operations
- use recursive dir delete only where absolutely necessary
- added call function fn.RMRF which safeguards against botched 'rm -rf';
if any target (or any variable is evaluated) which attempts
to remove any dirs which match a hard-coded 'safelist', a verbose
error will be printed and make will error-stop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103213 91177308-0d34-0410-b5e6-96231b3b80d8
gets placed inside a main function, and should not itself be a main
function. This is silently hidden in GCC-hosted builds because the
inner main looks like a nested function declaration, which GCC supports.
In builds with compilers which do not support nested functions (by default),
this was causing an error, which caused these autoconf checks to fail,
leaving their options disabled.
This fixes test/Feature/load_module.ll on x86_64-unknown-linux-gnu
llvm-gcc selfhost builds, among other things.
This also includes a regenerated configure, as the diff is small and telling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102288 91177308-0d34-0410-b5e6-96231b3b80d8
in r86005 and unintentionally changed the default from -O3 to -O2.
- It's odd the things automated perf testing turns up! :)
- Also, the configure diff is messed up slightly. It looks like someone either
didn't regenerate configure correctly (or I didn't), or autoconf has some
funnyness in it. Eric, any ideas?
This has been at -O2 for so long, that I am slightly nervous that this change
will uncover miscompiles of LLVM on other systems. If that is the case, I think
we should just set the default universally at -O3, and let developers/vendors
use -O3 if they want it and have tested it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100941 91177308-0d34-0410-b5e6-96231b3b80d8
now configures prerequisite projects individually but also ignores them in the
big project switch statement to avoid the incorrect warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99506 91177308-0d34-0410-b5e6-96231b3b80d8
projects rely upon llvm-gcc, the LLVM test suite, and poolalloc. This ensures
that the aforementioned projects have their object trees created first so that
other projects can find their object trees when they themselves are configured.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98998 91177308-0d34-0410-b5e6-96231b3b80d8
Comes in two parts:
1. Use --with-clang=path/to/clang/compiler to select an installed clang, or
--with-built-clang to have the makefiles use the clang which will be built
as the LLVM capable compiler. If neither is given, --with-built-clang will
be used if the Clang sources are checked out into the standard location
(tools/clang).
2. Use --with-llvmcc={llvm-gcc,clang,none} to specify which LLVM capable
compiler to use. If not given, then llvm-gcc will be used if available,
otherwise Clang.
Makefile support still to come.
Eric, Doug, Chris, seem reasonable?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96934 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-shared configure flag to have the tools linked shared. (2.7svn is just
$(LLVMVersion) so it'll change to "2.7" in the release.) Always link the
example programs shared to test that the shared library keeps working.
On my mac laptop, Debug libLLVM2.7svn.dylib is 39MB, and opt (for example) is
16M static vs 440K shared.
Two things are less than ideal here:
1) The library doesn't include any version information. Since we expect to break
the ABI with every release, this shouldn't be much of a problem. If we do
release a compatible 2.7.1, we may be able to hack its library to work with
binaries compiled against 2.7.0, or we can just ask them to recompile. I'm
hoping to get a real packaging expert to look at this for the 2.8 release.
2) llvm-config doesn't yet have an option to print link options for the shared
library. I'll add this as a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96559 91177308-0d34-0410-b5e6-96231b3b80d8
setenv(). This patch just disables the test rather than getting putenv() to
work. Thanks to Sandeep Patel for reporting the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82797 91177308-0d34-0410-b5e6-96231b3b80d8
same effect that "host-only" used to have, but can be combined with other
targets. host-only is still available as a synonym but no longer documented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82634 91177308-0d34-0410-b5e6-96231b3b80d8
that all the Makefiles changed mode.
Fix this by tellint install-sh to chmod
only to 0644, these are not executable files after all!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80371 91177308-0d34-0410-b5e6-96231b3b80d8
A include/llvm/ADT/iterator.cmake
U autoconf/configure.ac
--- Reverse-merging r80161 into '.':
U cmake/config-ix.cmake
--- Reverse-merging r80171 into '.':
U Makefile
--- Reverse-merging r80173 into '.':
U configure
U include/llvm/Config/config.h.in
--- Reverse-merging r80180 into '.':
A include/llvm/ADT/iterator.h.in
Despite common miscomceptions, iterator.h is alive and well. It broke the build
bots for several hours. And yet no one bothered to look at them.
Gabor and Doug, please review your changes and make sure that they actually
build before resubmitting them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80197 91177308-0d34-0410-b5e6-96231b3b80d8
Note that configure was edited by hand. Will somebody with the correct version of autoconf please regenerate?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77898 91177308-0d34-0410-b5e6-96231b3b80d8
initialization of all targets (InitializeAllTargets.h) or assembler
printers (InitializeAllAsmPrinters.h). This is a step toward the
elimination of relinked object files, so that we can build normal
archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73543 91177308-0d34-0410-b5e6-96231b3b80d8
mutex support. LLVM_MULTITHREADED indicates (or will indicate) the ability to run LLVM itself across multiple threads, and requires atomics support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72140 91177308-0d34-0410-b5e6-96231b3b80d8
disable building LLVM in thread-safe mode and print a nice warning.
Regenerate configure for these changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72075 91177308-0d34-0410-b5e6-96231b3b80d8
Should now work when building with objdir != srcdir and when llvm-gcc is not
available.
Thanks to Duncan Sands for testing and advice!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69700 91177308-0d34-0410-b5e6-96231b3b80d8
Configure was not actually regenerated, but the change last time only touched
this one line, so I'm being lazy and cheating by fixing it manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69453 91177308-0d34-0410-b5e6-96231b3b80d8
Before there were two problems: (1) configure
turned "obj-c++" into "obj" in the langs line;
(2) the dejagnu library called it objc++ not
obj-c++.
Now the problem is that some of these tests don't
pass!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57167 91177308-0d34-0410-b5e6-96231b3b80d8
runnable on the build machine.
There are a few bits that need built for the build environment (TableGen).
This patch builds those bits, and the associated libraries, for the build
environment as well as the (usual) host environment.
Thanks to Eric C. and Devang P. for pre-commit review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56975 91177308-0d34-0410-b5e6-96231b3b80d8
We will keep the old projects/llvm-test working for existing installs.
The changes to configure are made manually, since I lack autoconf-2.6. Someone
might want to run AutoGen.sh to see if that changes anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52675 91177308-0d34-0410-b5e6-96231b3b80d8
put it in a new header System/Host.h instead.
Instead of getting the endianness from configure,
calculate it directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44959 91177308-0d34-0410-b5e6-96231b3b80d8
using the minimum possible number of bytes. For little
endian targets run on little endian machines, apints are
stored in memory from LSB to MSB as before. For big endian
targets on big endian machines they are stored from MSB to
LSB which wasn't always the case before (if the target and
host endianness doesn't match values are stored according
to the host's endianness). Doing this requires knowing the
endianness of the host, which is determined when configuring -
thanks go to Anton for this. Only having access to little
endian machines I was unable to properly test the big endian
part, which is also the most complicated...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44796 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-expensive-checks allows the developer to enable runtime
checking that can greatly increase compile time. Currently it only
turns on _GLIBCXX_DEBUG. Other expensive debugging checks added later
should be controlled by this configure option.
This patch also updates llvm-config with a --cppflags option to inform
llvm-gcc how to build itself so that it is compatible with an llvm that
was built with _GLIBCXX_DEBUG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37777 91177308-0d34-0410-b5e6-96231b3b80d8
Add HAVE_PTHREAD to makefiles with support from configure and use it to
determine whether to build examples/ParallelJIT.
Patch by Anton Korobeynikov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32054 91177308-0d34-0410-b5e6-96231b3b80d8
premature, these libraries will be going away for the 2.0 release. Other
arrangements for profiling, gc, etc. should be made in the next few months.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31807 91177308-0d34-0410-b5e6-96231b3b80d8
stands a chance of being compiled with a non C99 C compiler. The default
is enabled so you must specifically disable this feature if you want the
CBE output compiled with an older C compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31461 91177308-0d34-0410-b5e6-96231b3b80d8
Demote check for bison from error to warning and make sure that the
makefile can handle an empty definition for BISON variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29861 91177308-0d34-0410-b5e6-96231b3b80d8
Update ltld.[ch] to version 1.5.22.
Correct the notes about updating these tools (autoconf/README.TXT)
Add configure options for getting the correct option for including a whole
archive when linking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29529 91177308-0d34-0410-b5e6-96231b3b80d8
1. Get the path to the pwd binary (/bin/pwd usually) from configure.
2. Use that path to run pwd in all path variables set in Makefile.config.in
The hope is that these changes will resolve symlinks to physical paths. This
should work on all platforms where the binary pwd defaults to printing
physical paths. The shell version of pwd generally doesn't (it will print
the symlink path).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29381 91177308-0d34-0410-b5e6-96231b3b80d8
have a compile-host version of "nm", not build-host. In order to effect this
we must use autoconf to determine the correct "nm" to use and propagate that
through the makefiles, through llvm-config and finally to GenLibDeps.pl as
an optional argument.
Patch contributed by Anton Korobeynikov. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29368 91177308-0d34-0410-b5e6-96231b3b80d8
Provide support for making cross-compiling builds. See the PR for details.
Patch provided by Anton Korobeynikov. Thanks, Anton!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29309 91177308-0d34-0410-b5e6-96231b3b80d8
Add configure checks for setjmp/longjmp for Chris. I can't believe this easy
PR has been outstanding for so long. If I don't get to something, please
remind me! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28686 91177308-0d34-0410-b5e6-96231b3b80d8
are available. These libraries are used in lib/System and should be
included on the link line or if not available generate an error when
building lib/System.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28628 91177308-0d34-0410-b5e6-96231b3b80d8
This assists with getting around configure's late binding values so that
our LLVM variables don't end up with a "NONE" prefix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28325 91177308-0d34-0410-b5e6-96231b3b80d8
and is unlikely to change in future releases. This also simplifies the
parsing of the full and major llvm-gcc version numbers in the script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28180 91177308-0d34-0410-b5e6-96231b3b80d8
If we fail to find a required program, simply set that program to echo
out something that tells the user the situation. That is, instead of just
"true runtest" we now get "echo 'Skipped: runtest not found'".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27990 91177308-0d34-0410-b5e6-96231b3b80d8
1. Assertions now default to on for all builds
2. If you want them disabled you must (a) --disable-assertions to configure
or DISABLE_ASSERTIONS=1 to make.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27548 91177308-0d34-0410-b5e6-96231b3b80d8
Support detection of a "CVS" directory at configure time to distinguish
whether this is a release build or a "from tree" build. This knowledge is
used to set the defaults for --enable-optimzied and --enable-assertions
options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27487 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-gcc command. This will help distinguish which version is being used
so the makefiles can accommodate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27461 91177308-0d34-0410-b5e6-96231b3b80d8
1. Check for Perl and only build llvm-config if its available.
2. Add some virtual components
3. Don't depend on "standard" location for Perl, but configured location
4. Document the tool with a POD file.
This version is now ready for testing by users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27005 91177308-0d34-0410-b5e6-96231b3b80d8
is a handy tool for users of LLVM who want to be able to quickly get
information about LLVM's configuration. It is intended to be used in the
command line of other tools. Documentation will be forthcoming in a
subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26952 91177308-0d34-0410-b5e6-96231b3b80d8
* Add --enable-debug-runtime option, defaults to disabled
* Pass the new config var, DEBUG_RUNTIME, to Makefiles
* Don't use -Wa,-strip-debug if debug-runtime is enabled
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24891 91177308-0d34-0410-b5e6-96231b3b80d8
These patches make threading optional in LLVM. The configuration scripts are now
modified to accept a --disable-threads switch. If this is used, the Mutex class
will be implemented with all functions as no-op. Furthermore, linking against
libpthread will not be done. Finally, the ParallelJIT example needs libpthread
so its makefile was changed to always add -lpthread to the link line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23003 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the script assumed the version number was the last field, now
it assumes it is the first sequence of digits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22527 91177308-0d34-0410-b5e6-96231b3b80d8
we actually get the path and not $GRAPHVIZ as the value.
* Add a #define for the gv program (HAVE_GV) and its value LLVM_PATH_GV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22433 91177308-0d34-0410-b5e6-96231b3b80d8
GRAPHVIZ will contain the path to the program if its found (or "echo Graphviz"
if not) and the #define HAVE_GRAPHVIZ will be defined if its found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22424 91177308-0d34-0410-b5e6-96231b3b80d8