This was initialized by llvm-mc (calling setDwarfVersion) but other
clients (such as clang, llc, etc) aren't necessarily initializing this
so we were getting garbage DWARF version values in the output.
Initialize it to a reasonable default (the same default used in llvm-mc,
though this is higher than it was (2) previously).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207788 91177308-0d34-0410-b5e6-96231b3b80d8
from places like MCCodeEmitter() in the MC backend when the
MCContext is const.
I was going to use this in my change for r206669 but Jim convinced
me to use an assert there. But this still is a good tweak.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206923 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to have been a cargo-culted habit from the very first such
cache which didn't have any specific justification (but might've been a
layering constraint at the time).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206003 91177308-0d34-0410-b5e6-96231b3b80d8
To support compressing the debug_line section that contains multiple
fragments (due, I believe, to variation in choices of line table
encoding depending on the size of instruction ranges in the actual
program code) we needed to support compressing multiple MCFragments in a
single pass.
This patch implements that behavior by mutating the post-relaxed and
relocated section to be the compressed form of its former self,
including renaming the section.
This is a more flexible (and less invasive, to a degree) implementation
that will allow for other features such as "use compression only if it's
smaller than the uncompressed data".
Compressing debug_frame would be a possible further extension to this
work, but I've left it for now. The hurdle there is alignment sections -
which might require going as far as to refactor
MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an
MCObjectWriter (there's already a virtual call there, so it shouldn't
add substantial compile-time cost) which could in turn involve
refactoring MCAsmBackend::writeNopData to use that same abstraction...
which involves touching all the backends. This would remove the limited
handling of fragment writing seen in
ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's
more invasive.
I did discover that I (perhaps obviously) don't need to handle
relocations when I rewrite the fragments - since the relocations have
already been applied and computed (and stored into
ELFObjectWriter::Relocations) by this stage (necessarily, because we
need to have written any immediate values or assembly-time relocations
into the data already before we compress it, which we have). The test
case doesn't necessarily cover that in detail - I can add more test
coverage if that's preferred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205990 91177308-0d34-0410-b5e6-96231b3b80d8
To support compression for debug_line and debug_frame a different
approach is required. To simplify review, revert the old implementation
and XFAIL the test case. New implementation to follow shortly.
Reverts r205059 and r204958.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205989 91177308-0d34-0410-b5e6-96231b3b80d8
The upcoming ARM64 backend doesn't have section-relative relocations,
so we give each section its own symbol to provide this functionality.
Of course, it doesn't need to appear in the final executable, so
linker-private is the best kind for this purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205081 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out debug_frame does use multiple fragments, so it doesn't
compress correctly with the current approach. Disable compressing it for
now while I figure out what's the best solution for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205059 91177308-0d34-0410-b5e6-96231b3b80d8
1) When creating a .debug_* section and instead create a .zdebug_
section.
2) When creating a fragment in a .zdebug_* section, make it a compressed
fragment.
3) When computing the size of a compressed section, compress the data
and use the size of the compressed data.
4) Emit the compressed bytes.
Also, check that only if a section has a compressed fragment, then that
is the only fragment in the section.
Assert-fail if the fragment's data is modified after it is compressed.
Initial review on llvm-commits by Eric Christopher and Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204958 91177308-0d34-0410-b5e6-96231b3b80d8
For better or worse, this is currently the normal error reporting path
when dealing with backend errors from inline assembly. It's not just
internal compiler issues that come through here, so we shouldn't be
creating a backtrace on this path.
rdar://16329947
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203979 91177308-0d34-0410-b5e6-96231b3b80d8
This type now represents all the data for the DWARF line table:
directory names, file names, and the line table proper.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203858 91177308-0d34-0410-b5e6-96231b3b80d8
There aren't /that/ many files, and we are already using various maps
and other standard containers that don't use MCContext's allocator to
store these values, so this doesn't seem to be critical and simplifies
the design (I'll be moving construction out of MCContext shortly so it'd
be annoying to have to pass the allocator around to allocate these
things... and we'll have non-MCContext users (debug_line.dwo) shortly)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203831 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the implementation of local directional labels to use a dedicated
map. With that it can then just use CreateTempSymbol, which is what the rest
of MC uses.
CreateTempSymbol doesn't do a great job at making sure the names are unique
(or being efficient when the names are not needed), but that should probably
be fixed in a followup patch.
This fixes pr18928.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203826 91177308-0d34-0410-b5e6-96231b3b80d8
This replaces several "compile unit ID -> thing" mappings in favor of
one mapping from CUID to the whole line table structure (files,
directories, and lines).
This is another step along the way to refactoring out reusable
components of line table handling for use when generating debug_line.dwo
for fission type units.
Also, might be a good basis to fold some of this handling down into
MCStreamers to avoid the special case of "One line table when doing asm
printing, line table per CU otherwise" by building it into the different
MCStreamer implementations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203821 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the mapping consistent with other CU->X mappings in the
MCContext, helping pave the way to refactor all these values into a
single data structure per CU and thus a single map.
I haven't renamed the data structure as that would make the patch churn
even higher (the MCLineSection name no longer makes sense, as this
structure now contains lines for multiple sections covered by a single
CU, rather than lines for a single section in multiple CUs) and further
refactorings will follow that may remove this type entirely.
For convenience, I also gave the MCLineSection value semantics so we
didn't have to do the lazy construction, manual delete, etc.
(& for those playing at home, refactoring the line printing into a
single data structure will eventually alow that data structure to be
reused to own the debug_line.dwo line table used for type unit file name
resolution)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203726 91177308-0d34-0410-b5e6-96231b3b80d8
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198685 91177308-0d34-0410-b5e6-96231b3b80d8
MCJIT needs to be able to run in hostile environments, even when PWD
is invalid. There's no need to crash MCJIT in this case.
The obvious fix is to simply leave MCContext's CompilationDir empty
when PWD can't be determined. This way, MCJIT clients,
and other clients that link with LLVM don’t need a valid working directory.
If we do want to guarantee valid CompilationDir, that should be done
only for clients of getCompilationDir(). This is as simple as checking
for an empty string.
The only current use of getCompilationDir is EmitGenDwarfInfo, which
won’t conceivably run with an invalid working dir. However, in the
purely hypothetically and untestable case that this happens, the
AT_comp_dir will be omitted from the compilation_unit DIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196874 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196471 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first step to fix pr17918.
It extends the .section directive a bit, inspired by what the ELF one looks
like. The problem with using linkonce is that given
.section foo
.linkonce....
.section foo
.linkonce
we would already have switched sections when getting to .linkonce. The cleanest
solution seems to be to add the comdat information in the .section itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195148 91177308-0d34-0410-b5e6-96231b3b80d8
Someone may want to do something crazy, like replace these objects if they
change or something.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184175 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit a line table for each compile unit. To reduce the prologue size
of each line table, the files and directories used by each compile unit are
stored in std::map<unsigned, std::vector< > > instead of std::vector< >.
The prologue for a lto'ed image can be as big as 93K. Duplicating 93K for each
compile unit causes a huge increase of debug info. With this patch, each
prologue will only emit the files required by the compile unit.
rdar://problem/13342023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176605 91177308-0d34-0410-b5e6-96231b3b80d8
We generate one line table for each compilation unit in the object file.
Reviewed by Eric and Kevin.
rdar://problem/13067005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174445 91177308-0d34-0410-b5e6-96231b3b80d8
compilation directory.
This defaults to the current working directory, just as it always has,
but now an assembler can choose to override it with a custom directory.
I've taught llvm-mc about this option and added a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170371 91177308-0d34-0410-b5e6-96231b3b80d8
original change description:
change MCContext to work on the doInitialization/doFinalization model
reviewed by Evan Cheng <evan.cheng@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169553 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
