It is not possible to distinguish 3r instructions from 2r / rus instructions
using only the fixed bits. Therefore if an instruction doesn't match the
2r / rus format try to decode it as a 3r instruction before returning Fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172984 91177308-0d34-0410-b5e6-96231b3b80d8
The optimization handles esoteric cases but adds a lot of complexity both to the X86 backend and to other backends.
This optimization disables an important canonicalization of chains of SEXT nodes and makes SEXT and ZEXT asymmetrical.
Disabling the canonicalization of consecutive SEXT nodes into a single node disables other DAG optimizations that assume
that there is only one SEXT node. The AVX mask optimizations is one example. Additionally this optimization does not update the cost model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172968 91177308-0d34-0410-b5e6-96231b3b80d8
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Formatting fixes. Mostly long lines and
blank spaces at end of lines.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172882 91177308-0d34-0410-b5e6-96231b3b80d8
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Support for Mips register information sections.
Mips ELF object files have a section that is dedicated
to register use info. Some of this information such as
the assumed Global Pointer value is used by the linker
in relocation resolution.
The register info file is .reginfo in o32 and .MIPS.options
in 64 and n32 abi files.
This patch contains the changes needed to create the sections,
but leaves the actual register accounting for a future patch.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172847 91177308-0d34-0410-b5e6-96231b3b80d8
Some instructions like memory reads/writes are executed
asynchronously, so we need to insert S_WAITCNT instructions
to block before accessing their results. Previously we have
just inserted S_WAITCNT instructions after each async
instruction, this patch fixes this and adds a prober
insertion pass.
Patch by: Christian König
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172846 91177308-0d34-0410-b5e6-96231b3b80d8
We shouldn't insert KILL optimization if we don't have a
kill instruction at all.
Patch by: Christian König
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172845 91177308-0d34-0410-b5e6-96231b3b80d8
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
Removal of redundant code and formatting fixes.
Contributers: Jack Carter/Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172842 91177308-0d34-0410-b5e6-96231b3b80d8
_Complex float and _Complex long double, by simply increasing the
number of floating point registers available for return values.
The test case verifies that the correct registers are loaded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172733 91177308-0d34-0410-b5e6-96231b3b80d8
Move the early if-conversion pass into this group.
ILP optimizations usually need to find the right balance between
register pressure and ILP using the MachineTraceMetrics analysis to
identify critical paths and estimate other costs. Such passes should run
together so they can share dominator tree and loop info analyses.
Besides if-conversion, future passes to run here here could include
expression height reduction and ARM's MLxExpansion pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172687 91177308-0d34-0410-b5e6-96231b3b80d8
but I cannot reproduce the problem and have scrubed my sources and
even tested with llvm-lit -v --vg.
The Mips RDHWR (Read Hardware Register) instruction was not
tested for assembler or dissassembler consumption. This patch
adds that functionality.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172685 91177308-0d34-0410-b5e6-96231b3b80d8
Moving the X86CostTable to a common place, so that other back-ends
can share the code. Also simplifying it a bit and commoning up
tables with one and two types on operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172658 91177308-0d34-0410-b5e6-96231b3b80d8
Hope you are feeling better.
The Mips RDHWR (Read Hardware Register) instruction was not
tested for assembler or dissassembler consumption. This patch
adds that functionality.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172579 91177308-0d34-0410-b5e6-96231b3b80d8
we need to generate a N64 compound relocation
R_MIPS_GPREL_32/R_MIPS_64/R_MIPS_NONE.
The bug was exposed by the SingleSourcetest case
DuffsDevice.c.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172496 91177308-0d34-0410-b5e6-96231b3b80d8
Those can occur when something between the sextload and the store is on the same
chain and blocks isel. Fixes PR14887.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172353 91177308-0d34-0410-b5e6-96231b3b80d8
register names in the standalone assembler llvm-mc.
Registers such as $A1 can represent either a 32 or
64 bit register based on the instruction using it.
In addition, based on the abi, $T0 can represent different
32 bit registers.
The problem is resolved by the Mips specific AsmParser
td definitions changing to work together. Many cases of
RegisterClass parameters are now RegisterOperand.
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172284 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a check for -Oz, changes the code to not re-visit BBs,
and skips over DBG_VALUE instrs.
Patch by Andy Zhang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172258 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adjust the r171506 to make all DWARF enconding pc-relative
for PPC64. It also adds the R_PPC64_REL32 relocation handling in MCJIT
(since the eh_frame will not generate PIC-relative relocation) and also
adds the emission of stubs created by the TTypeEncoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171979 91177308-0d34-0410-b5e6-96231b3b80d8
PR 14848. The lowered sequence is based on the existing sequence the target-independent
DAG Combiner creates for the scalar case.
Patch by Zvi Rackover.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171953 91177308-0d34-0410-b5e6-96231b3b80d8
This was an experimental option, but needs to be defined
per-target. e.g. PPC A2 needs to aggressively hide latency.
I converted some in-order scheduling tests to A2. Hal is working on
more test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171946 91177308-0d34-0410-b5e6-96231b3b80d8
value in the 64 bit .eh_frame section.
It doesn't however allow exception handling to work
yet since it depends on the correct relocation model
being set in the ELF header flags.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171881 91177308-0d34-0410-b5e6-96231b3b80d8
The current Intel Atom microarchitecture has a feature whereby
when a function returns early then it is slightly faster to execute
a sequence of NOP instructions to wait until the return address is ready,
as opposed to simply stalling on the ret instruction until
the return address is ready.
When compiling for X86 Atom only, this patch will run a pass,
called "X86PadShortFunction" which will add NOP instructions where less
than four cycles elapse between function entry and return.
It includes tests.
This patch has been updated to address Nadav's review comments
- Optimize only at >= O1 and don't do optimization if -Os is set
- Stores MachineBasicBlock* instead of BBNum
- Uses DenseMap instead of std::map
- Fixes placement of braces
Patch by Andy Zhang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171879 91177308-0d34-0410-b5e6-96231b3b80d8
code generation. Variables addressed through a GlobalAlias were not being
handled, and variables with available_externally linkage were treated
incorrectly. The patch contains two new tests to verify the correct code
generation for these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171778 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary not only for representing empty ranges, but for handling
multibyte characters in the input. (If the end pointer in a range refers to
a multibyte character, should it point to the beginning or the end of the
character in a char array?) Some of the code in the asm parsers was already
assuming this anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171765 91177308-0d34-0410-b5e6-96231b3b80d8
Absent a Contributor's License Agreement (CLA) with an LLVM legal entity and as
reviewed and agreed with Chris Lattner, add a patent license covering future
contributions from ARM until there is a CLA. This is to make explicit ARM's
grant of patent rights to recipients of LLVM containing ARM-contributed
material.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171721 91177308-0d34-0410-b5e6-96231b3b80d8
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.
The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.
The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.
The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.
The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.
The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.
The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.
The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.
Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.
Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.
Commits to update DragonEgg and Clang will be made presently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
cvtsi2* should parse with an 'l' or 'q' suffix or no suffix at all. No suffix should be treated the same as 'l' suffix. Printing should always print a suffix. Previously we didn't parse or print an 'l' suffix.
cvtt*2si/cvt*2si should parse with an 'l' or 'q' suffix or not suffix at all. No suffix should use the destination register size to choose encoding. Printing should not print a suffix.
Original 'l' suffix issue with cvtsi2* pointed out by Michael Kuperstein.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171668 91177308-0d34-0410-b5e6-96231b3b80d8
interfaces which could be extracted from it, and must be provided on
construction, to a chained analysis group.
The end goal here is that TTI works much like AA -- there is a baseline
"no-op" and target independent pass which is in the group, and each
target can expose a target-specific pass in the group. These passes will
naturally chain allowing each target-specific pass to delegate to the
generic pass as needed.
In particular, this will allow a much simpler interface for passes that
would like to use TTI -- they can have a hard dependency on TTI and it
will just be satisfied by the stub implementation when that is all that
is available.
This patch is a WIP however. In particular, the "stub" pass is actually
the one and only pass, and everything there is implemented by delegating
to the target-provided interfaces. As a consequence the tools still have
to explicitly construct the pass. Switching targets to provide custom
passes and sinking the stub behavior into the NoTTI pass is the next
step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171621 91177308-0d34-0410-b5e6-96231b3b80d8
URL: http://llvm.org/viewvc/llvm-project?rev=171524&view=rev
Log:
The current Intel Atom microarchitecture has a feature whereby when a function
returns early then it is slightly faster to execute a sequence of NOP
instructions to wait until the return address is ready,
as opposed to simply stalling on the ret instruction
until the return address is ready.
When compiling for X86 Atom only, this patch will run a pass, called
"X86PadShortFunction" which will add NOP instructions where less than four
cycles elapse between function entry and return.
It includes tests.
Patch by Andy Zhang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171603 91177308-0d34-0410-b5e6-96231b3b80d8
legality of an address mode to not use a struct of four values and
instead to accept them as parameters. I'd love to have named parameters
here as most callers only care about one or two of these, but the
defaults aren't terribly scary to write out.
That said, there is no real impact of this as the passes aren't yet
using STTI for this and are still relying upon TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171595 91177308-0d34-0410-b5e6-96231b3b80d8
returns early then it is slightly faster to execute a sequence of NOP
instructions to wait until the return address is ready,
as opposed to simply stalling on the ret instruction
until the return address is ready.
When compiling for X86 Atom only, this patch will run a pass, called
"X86PadShortFunction" which will add NOP instructions where less than four
cycles elapse between function entry and return.
It includes tests.
Patch by Andy Zhang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171524 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the PPC eh_frame definitions for the personality and
frame unwinding for PIC objects. It makes PIC build correctly creates
relative relocations in the '.rela.eh_frame' segments and thus avoiding
a text relocation that generates a DT_TEXTREL segments in link phase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171506 91177308-0d34-0410-b5e6-96231b3b80d8
1. Add code to estimate register pressure.
2. Add code to select the unroll factor based on register pressure.
3. Add bits to TargetTransformInfo to provide the number of registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171469 91177308-0d34-0410-b5e6-96231b3b80d8
Simplified TRUNCATE operation that comes after SETCC. It is possible since SETCC result is 0 or -1.
Added a test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171468 91177308-0d34-0410-b5e6-96231b3b80d8
In order to cost subvector insertion and extraction, we need to know
the type of the subvector being extracted.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171453 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171362 91177308-0d34-0410-b5e6-96231b3b80d8
The later API is nicer than the former, and is correct regarding wrap-around offsets (if anyone cares).
There are a few more places left with duplicated code, which I'll remove soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171259 91177308-0d34-0410-b5e6-96231b3b80d8
directly.
This is in preparation for removing the use of the 'Attribute' class as a
collection of attributes. That will shift to the AttributeSet class instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171253 91177308-0d34-0410-b5e6-96231b3b80d8
register. In most cases we actually compare or select YMM-sized registers
and mixing the two types creates horrible code. This commit optimizes
some of the transition sequences.
PR14657.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171148 91177308-0d34-0410-b5e6-96231b3b80d8
The vector truncs were scalarized during LegalizeVectorOps, later vectorized again by some DAGCombine optimization
and finally, lowered by a dagcombing optimization. Now, they are properly lowered during LegalizeVectorOps.
No new testcase because the original testcases still work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171146 91177308-0d34-0410-b5e6-96231b3b80d8
Use of store or load with the atomic specifier on 64-bit types would
cause instruction-selection failures. As with the 32-bit case, these
can use the default expansion in terms of cmp-and-swap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171072 91177308-0d34-0410-b5e6-96231b3b80d8
This affords us to use std::string's allocation routines and use the destructor
for the memory management. Switching to that also means that we can use
operator==(const std::string&, const char *) to perform the string comparison
rather than resorting to libc functionality (i.e. strcmp).
Patch by Saleem Abdulrasool!
Differential Revision: http://llvm-reviews.chandlerc.com/D230
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171042 91177308-0d34-0410-b5e6-96231b3b80d8
When these instructions are encoded in VEX (on AVX) there is no such requirement. This changes the folding
tables and removes the alignment restrictions from VEX-encoded instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171024 91177308-0d34-0410-b5e6-96231b3b80d8
the cost of arithmetic functions. We now assume that the cost of arithmetic
operations that are marked as Legal or Promote is low, but ops that are
marked as custom are higher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171002 91177308-0d34-0410-b5e6-96231b3b80d8
pmuludq is slow, but it turns out that all the unpacking and packing of the
scalarized mul is even slower. 10% speedup on loop-vectorized paq8p.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170985 91177308-0d34-0410-b5e6-96231b3b80d8
Also loosen the SSSE3 dependency a bit, expanded pshufb + psra is still better
than scalarized loads. Fixes PR14590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170984 91177308-0d34-0410-b5e6-96231b3b80d8
The only way to read the eflags is using push and pop. If we don't
adjust the stack then we run over the first frame index. This is
not something that we want to do, so we have to make sure that
our machine function does not copy the flags. If it does then
we have to emit the prolog that adjusts the stack.
rdar://12896831
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170961 91177308-0d34-0410-b5e6-96231b3b80d8