This expands to '&', and is intended to be used when an /optional/ rvalue
override is available.
Before:
void foo() const { ... }
After:
void foo() const LLVM_LVALUE_FUNCTION { ... }
void foo() && { ... }
This is used to allow moving the contents of an Optional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168963 91177308-0d34-0410-b5e6-96231b3b80d8
appropriate unit tests. This change in itself is not expected to
affect any functionality at this point, but it will serve as a
stepping stone to improve FileCheck's variable matching capabilities.
Luckily, our regex implementation already supports backreferences,
although a bit of hacking is required to enable it. It supports both
Basic Regular Expressions (BREs) and Extended Regular Expressions
(EREs), without supporting backrefs for EREs, following POSIX strictly
in this respect. And EREs is what we actually use (rightly). This is
contrary to many implementations (including the default on Linux) of
POSIX regexes, that do allow backrefs in EREs.
Adding backref support to our EREs is a very simple change in the
regcomp parsing code. I fail to think of significant cases where it
would clash with existing things, and can bring more versatility to
the regexes we write. There's always the danger of a backref in a
specially crafted regex causing exponential matching times, but since
we mainly use them for testing purposes I don't think it's a big
problem. [it can also be placed behind a flag specific to FileCheck,
if needed].
For more details, see:
* http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-November/055840.html
* http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/156878.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168802 91177308-0d34-0410-b5e6-96231b3b80d8
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer. Additionally,
only TOC entries are addressed via the TOC pointer.
With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset. Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed. Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.
Consider a load of an external 4-byte integer. With small code model, the
compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
With medium model, it instead generates:
addis 3, 2, .LC1@toc@ha
ld 3, .LC1@toc@l(3)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer. Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits. Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.
Consider next a load of a function-scope static integer. For small code
model, the compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc test_fn_static.si[TC],test_fn_static.si
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
For medium code model, the compiler generates:
addis 3, 2, test_fn_static.si@toc@ha
addi 3, 3, test_fn_static.si@toc@l
lwz 4, 0(3)
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.
Note that it would be more efficient for the compiler to generate:
addis 3, 2, test_fn_static.si@toc@ha
lwz 4, test_fn_static.si@toc@l(3)
The current patch does not perform this optimization yet. This will be
addressed as a peephole optimization in a later patch.
For the moment, the default code model for 64-bit PowerPC will remain the
small code model. We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior. Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.
I've tested the regression suite and the application/benchmark test suite in
two ways: Once with the patch as submitted here, and once with additional
logic to force medium code model as the default. The tests all compile
cleanly, with one exception. The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers. It just so happens
that small code model was incredibly lucky, in that temporary values in
floating-point registers held the expected values needed by the external
library routine that was called incorrectly. My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."
Here are a few comments on how the patch works, since the selection code
can be difficult to follow:
The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses. These are expanded by SelectCodeCommon(). The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL. These new node types correspond naturally to
the sequences described above.
The addis/ld sequence is generated for the following cases:
* Jump table addresses
* Function addresses
* External global variables
* Tentative definitions of global variables (common linkage)
The addis/addi sequence is generated for the following cases:
* Constant pool entries
* File-scope static global variables
* Function-scope static variables
Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.
The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to
a "real" PowerPC instruction. When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).
I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL. So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.
Note that for LDtocL, we generate a new form of LD called LDrs. This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.
The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.
The above assumes use of an external assembler. For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
The rationale is to get YAML filenames in diagnostics from
yaml::Stream::printError -- currently the filename is hard-coded as
"YAML" because there's no buffer information available.
Patch by Kim Gräsman!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168341 91177308-0d34-0410-b5e6-96231b3b80d8
values in a map that can be passed to consumers. Add a testcase that
ensures this works for llvm-dwarfdump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167558 91177308-0d34-0410-b5e6-96231b3b80d8
is that the unit test doesn't have IntTy equal to APInt, instead it uses a class
derived from APInt. When, as in these lines, an IntTy& reference is returned
but is assigned to an APInt&, the compiler destroys the temporary the IntTy& was
referring to, leaving the APInt& referring to garbage. This causes the unittest
to fail systematically on my machine; it can also be caught by running the test
under valgrind.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167356 91177308-0d34-0410-b5e6-96231b3b80d8
isa<> et al. automatically infer when the cast is an upcast (including a
self-cast), so these are no longer necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165767 91177308-0d34-0410-b5e6-96231b3b80d8
Additionally, all such cases are handled with no dynamic check.
All `classof()` of the form
class Foo {
[...]
static bool classof(const Bar *) { return true; }
[...]
}
where Foo is an ancestor of Bar are no longer necessary.
Don't write them!
Note: The exact test is `is_base_of<Foo, Bar>`, which is non-strict, so
that Foo is considered an ancestor of itself.
This leads to the following rule of thumb for LLVM-style RTTI:
The argument type of `classof()` should be a strict ancestor.
For more information about implementing LLVM-style RTTI, see
docs/HowToSetUpLLVMStyleRTTI.rst
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165765 91177308-0d34-0410-b5e6-96231b3b80d8
folders and not having it here fails to compile if you actually try to use it.
Also, CreatePointerCast was failing to do the part where it does TD-aware
constant folding. Granted there is exactly one case where that it will ever
do anything, but there's no reason to skip it. For reference, that case is a
subtraction between two constant offsets on the same global variable, eg.,
"&A[123] - &A[4].f".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164760 91177308-0d34-0410-b5e6-96231b3b80d8
This silences several analyzer warnings within LLVM, and provides a slightly
nicer crash experience when someone calls isa<>, cast<>, or dyn_cast<> with
a null pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164439 91177308-0d34-0410-b5e6-96231b3b80d8
store this and use it to not emit long nops when the CPU is geode which
doesnt support them.
Fixes PR11212.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164132 91177308-0d34-0410-b5e6-96231b3b80d8
- The current_pos function is supposed to return all the written bytes, not the
current position of the underlying stream.
- This caused tell() to be broken whenever the underlying stream had buffered
content.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163948 91177308-0d34-0410-b5e6-96231b3b80d8
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph);
* use \param instead of \arg to document parameters in order to be consistent
with the rest of the codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163902 91177308-0d34-0410-b5e6-96231b3b80d8
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163790 91177308-0d34-0410-b5e6-96231b3b80d8
Rationale: For each preprocessor macro, either the definedness is what's
meaningful, or the value is what's meaningful, or both. If definedness is
meaningful, we should use #ifdef. If the value is meaningful, we should use
and #ifdef interchangeably for the same macro, seems ugly to me, even if
undefined macros are zero if used.
This also has the benefit that including an LLVM header doesn't prevent
you from compiling with -Wundef -Werror.
Patch by John Garvin!
<rdar://problem/12189979>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163148 91177308-0d34-0410-b5e6-96231b3b80d8
the case of multiple edges from one block to another.
A simple example is a switch statement with multiple values to the same
destination. The definition of an edge is modified from a pair of blocks to
a pair of PredBlock and an index into the successors.
Also set the weight correctly when building SelectionDAG from LLVM IR,
especially when converting a Switch.
IntegersSubsetMapping is updated to calculate the weight for each cluster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162572 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC doesn't support passing by-value parameters with alignment of
16-bytes or higher apparantly. What is deeply confusing is that it seems
to *sometimes* (but not always) apply this to any type whose alignment
is set using __declspec(align(...)). This caused lots of errors when we switch
SmallVector over to use the automatically aligned character array
utilities as they used __declspec(align(...)) heavily.
As a pretty horrible but effective work-around, we instead cherry pick
the smallest alignment sizes with specific types that happen to have the
correct alignment, and then fall back to the attribute solution past
them. This should resolve the MSVC build errors folks have been hitting.
Sorry for that. In good news, it will do this without introducing other
UB I hope. =]
Thanks to Timur Iskhodzhanov for helping me test this!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162549 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the TableGen'erated fixed length disassemblmer to use a
table-driven state machine rather than a massive set of nested
switch() statements.
As a result, the ARM Disassembler (ARMDisassembler.cpp) builds much more
quickly and generates a smaller end result. For a Release+Asserts build on
a 16GB 3.4GHz i7 iMac w/ SSD:
Time to compile at -O2 (averaged w/ hot caches):
Previous: 35.5s
New: 8.9s
TEXT size:
Previous: 447,251
New: 297,661
Builds in 25% of the time previously required and generates code 66% of
the size.
Execution time of the disassembler is only slightly slower (7% disassembling
10 million ARM instructions, 19.6s vs 21.0s). The new implementation has
not yet been tuned, however, so the performance should almost certainly
be recoverable should it become a concern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161888 91177308-0d34-0410-b5e6-96231b3b80d8
may invalidate its AliasSet because SSAUpdater does not update the AliasSet properly.
This patch teaches SSAUpdater to notify AliasSet that it made changes.
The testcase in PR12901 is too big to be useful and I could not reduce it to a normal size.
rdar://11872059 PR12901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161803 91177308-0d34-0410-b5e6-96231b3b80d8
- The defines are in stddint.h, which is #include'd already.
- The block wasn't used anyway, since it was _OpenBSD_, and not __OpenBSD__
Patch by David Hill!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161515 91177308-0d34-0410-b5e6-96231b3b80d8
yaml2obj takes a textual description of an object file in YAML format
and outputs the binary equivalent. This greatly simplifies writing
tests that take binary object files as input.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161205 91177308-0d34-0410-b5e6-96231b3b80d8
Since the llvm::sys::fs::map_file_pages() support function it relies on
is not yet implemented on Windows, the unit tests for FileOutputBuffer
are currently conditionalized to run only on unix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161099 91177308-0d34-0410-b5e6-96231b3b80d8
CallInst for intrinsics. This allows users of the InstVisitor that would
like to special case certain very common intrinsics to do so naturally
in keeping with the type hierarchy's utility classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161006 91177308-0d34-0410-b5e6-96231b3b80d8
Function names should be camel case, and start with a lower case letter. No
functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160813 91177308-0d34-0410-b5e6-96231b3b80d8
- section types
- dynamic table entries tags
- state flags for DT_FLAGS_1 entry
The patch reviewed by Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160433 91177308-0d34-0410-b5e6-96231b3b80d8
the move of *Builder classes into the Core library.
No uses of this builder in Clang or DragonEgg I could find.
If there is a desire to have an IR-building-support library that
contains all of these builders, that can be easily added, but currently
it seems likely that these add no real overhead to VMCore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160243 91177308-0d34-0410-b5e6-96231b3b80d8
IRBuilder, DIBuilder, etc.
This is the proper layering as MDBuilder can't be used (or implemented)
without the Core Metadata representation.
Patches to Clang and Dragonegg coming up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160237 91177308-0d34-0410-b5e6-96231b3b80d8
IntegersSubsetMapping
- Replaced type of Items field from std::list with std::map. In neares future I'll test it with DenseMap and do the correspond replacement
if possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159703 91177308-0d34-0410-b5e6-96231b3b80d8
IntegersSubsetMapping
- Replaced type of Items field from std::list with std::map. In neares future I'll test it with DenseMap and do the correspond replacement
if possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159659 91177308-0d34-0410-b5e6-96231b3b80d8
This was always part of the VMCore library out of necessity -- it deals
entirely in the IR. The .cpp file in fact was already part of the VMCore
library. This is just a mechanical move.
I've tried to go through and re-apply the coding standard's preferred
header sort, but at 40-ish files, I may have gotten some wrong. Please
let me know if so.
I'll be committing the corresponding updates to Clang and Polly, and
Duncan has DragonEgg.
Thanks to Bill and Eric for giving the green light for this bit of cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159421 91177308-0d34-0410-b5e6-96231b3b80d8
- LHS exclude RHS
- LHS intersect RHS (LHS successors will keeped)
- RHS exclude LHS
The complexity is N+M, where
N is size of LHS
M is size of RHS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159201 91177308-0d34-0410-b5e6-96231b3b80d8
advertising complete support w/o alignas implemented, and its
implementation of alignas in the latest versions is so convoluted as to
be unusable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159125 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Performance optimizations:
- SwitchInst: case values stored separately from Operands List. It allows to make faster access to individual case value numbers or ranges.
- Optimized IntItem, added APInt value caching.
- Optimized IntegersSubsetGeneric: added optimizations for cases when subset is single number or when subset consists from single numbers only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158997 91177308-0d34-0410-b5e6-96231b3b80d8
fail. Original commit message:
Performance optimizations:
- SwitchInst: case values stored separately from Operands List. It allows to make faster access to individual case value numbers or ranges.
- Optimized IntItem, added APInt value caching.
- Optimized IntegersSubsetGeneric: added optimizations for cases when subset is single number or when subset consists from single numbers only.
On my machine these optimizations gave about 4-6% of compile-time improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158986 91177308-0d34-0410-b5e6-96231b3b80d8
- SwitchInst: case values stored separately from Operands List. It allows to make faster access to individual case value numbers or ranges.
- Optimized IntItem, added APInt value caching.
- Optimized IntegersSubsetGeneric: added optimizations for cases when subset is single number or when subset consists from single numbers only.
On my machine these optimizations gave about 4-6% of compile-time improvement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158979 91177308-0d34-0410-b5e6-96231b3b80d8
There is a pretty staggering amount of this in LLVM's header files, this
is not all of the instances I'm afraid. These include all of the
functions that (in my build) are used by a non-static inline (or
external) function. Specifically, these issues were caught by the new
'-Winternal-linkage-in-inline' warning.
I'll try to just clean up the remainder of the clearly redundant "static
inline" cases on functions (not methods!) defined within headers if
I can do so in a reliable way.
There were even several cases of a missing 'inline' altogether, or my
personal favorite "static bool inline". Go figure. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158800 91177308-0d34-0410-b5e6-96231b3b80d8
array of a suitable size and alignment for any of a number of different
types to be stored into the character array.
The mechanisms for producing an explicitly aligned type are fairly
complex because this operation is poorly supported on all compilers.
We've spent a fairly significant amount of time experimenting with
different implementations inside of Google, and the one using explicitly
expanded templates has been the most robust.
Credit goes to Nick Lewycky for writing the first 20 versions or so of
this logic we had inside of Google. I based this on the only one to
actually survive. In case anyone is worried, yes we are both explicitly
re-contributing and re-licensing it for LLVM. =]
Once the issues with actually specifying the alignment are finished, it
turns out that most compilers don't in turn align anything the way they
are instructed. Testing of this logic against both Clang and GCC
indicate that the alignment constraints are largely ignored by both
compilers! I've come up with and used a work-around by wrapping each
alignment-hinted type directly in a struct, and using that struct to
align the character array through a union. This elaborate hackery is
terrifying, but I've included testing that caught a terrifying number of
bugs in every other technique I've tried.
All of this in order to implement a poor C++98 programmers emulation of
C++11 unrestricted unions in classes such as SmallDenseMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158597 91177308-0d34-0410-b5e6-96231b3b80d8
thread local data, embed them in the class using a uint64_t and make sure
we get compiler errors if there's a platform where this is not big enough.
This makes ThreadLocal more safe for using it in conjunction with CrashRecoveryContext.
Related to crash in rdar://11434201.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158342 91177308-0d34-0410-b5e6-96231b3b80d8
Changed type of Items collection: from std::vector to std::list.
Also some small fixes made in IntegersSubset.h, IntegersSubsetMapping.h and IntegersSubsetTest.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157987 91177308-0d34-0410-b5e6-96231b3b80d8
IntRange converted from struct to class. So main change everywhere is replacement of ".Low/High" with ".getLow/getHigh()"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157884 91177308-0d34-0410-b5e6-96231b3b80d8
IntegersSubsetGeneric, IntegersSubsetMapping: added IntTy template parameter, that allows use either APInt or IntItem. This change allows to write unittest for these classes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157880 91177308-0d34-0410-b5e6-96231b3b80d8
IntegersSubset devided into IntegersSubsetGeneric and into IntegersSubset itself. The first has no references to ConstantInt and works with IntItem only.
IntegersSubsetMapping also made generic. Here added second template parameter "IntegersSubsetTy" that allows to use on of two IntegersSubset types described below.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157815 91177308-0d34-0410-b5e6-96231b3b80d8
IntItem cleanup. IntItemBase, IntItemConstantIntImp and IntItem merged into IntItem. All arithmetic operators was propogated from APInt. Also added comparison operators <,>,<=,>=. Currently you will find set of macros that propogates operators from APInt to IntItem in the beginning of IntegerSubset. Note that THESE MACROS WILL REMOVED after all passes will case-ranges compatible. Also note that these macros much smaller pain that something like this:
if (V->getValue().ugt(AnotherV->getValue()) { ... }
These changes made IntItem full featured integer object. It allows to make IntegerSubset class generic (move out all ConstantInt references inside and add unit-tests) in next commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157810 91177308-0d34-0410-b5e6-96231b3b80d8
Implemented IntItem - the wrapper around APInt. Why not to use APInt item directly right now?
1. It will very difficult to implement case ranges as series of small patches. We got several large and heavy patches. Each patch will about 90-120 kb. If you replace ConstantInt with APInt in SwitchInst you will need to changes at the same time all Readers,Writers and absolutely all passes that uses SwitchInst.
2. We can implement APInt pool inside and save memory space. E.g. we use several switches that works with 256 bit items (switch on signatures, or strings). We can avoid value duplicates in this case.
3. IntItem can be easyly easily replaced with APInt.
4. Currenly we can interpret IntItem both as ConstantInt and as APInt. It allows to provide SwitchInst methods that works with ConstantInt for non-updated passes.
Why I need it right now? Currently I need to update SimplifyCFG pass (EqualityComparisons). I need to work with APInts directly a lot, so peaces of code
ConstantInt *V = ...;
if (V->getValue().ugt(AnotherV->getValue()) {
...
}
will look awful. Much more better this way:
IntItem V = ConstantIntVal->getValue();
if (AnotherV < V) {
}
Of course any reviews are welcome.
P.S.: I'm also going to rename ConstantRangesSet to IntegersSubset, and CRSBuilder to IntegersSubsetMapping (allows to map individual subsets of integers to the BasicBlocks).
Since in future these classes will founded on APInt, it will possible to use them in more generic ways.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157576 91177308-0d34-0410-b5e6-96231b3b80d8
Add the MCRegisterInfo to the factories and constructors.
Patch by Tom Stellard <Tom.Stellard@amd.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156828 91177308-0d34-0410-b5e6-96231b3b80d8
Ordinary patch for PR1255.
Added new case-ranges orientated methods for adding/removing cases in SwitchInst. After this patch cases will internally representated as ConstantArray-s instead of ConstantInt, externally cases wrapped within the ConstantRangesSet object.
Old methods of SwitchInst are also works well, but marked as deprecated. So on this stage we have no side effects except that I added support for case ranges in BitcodeReader/Writer, of course test for Bitcode is also added. Old "switch" format is also supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156704 91177308-0d34-0410-b5e6-96231b3b80d8