change functionality, but makes it more clear that the dynamic case and
the shuffle case don't overlap in any interesting way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230689 91177308-0d34-0410-b5e6-96231b3b80d8
Creating BinaryCoverageReader is a strange and complicated dance where
the constructor sets error codes that member functions will later
read, and the object is in an invalid state if readHeader isn't
immediately called after construction.
Instead, make the constructor private and add a static create method
to do the construction properly. This also has the benefit of removing
readHeader completely and simplifying the interface of the object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230676 91177308-0d34-0410-b5e6-96231b3b80d8
The current name is long and confusing. A shorter one is both easier
to understand and easier to work with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230675 91177308-0d34-0410-b5e6-96231b3b80d8
It is not sound to mark the increment operation as `nuw` or `nsw`
based on a proof off of the add recurrence if the increment operation
we emit happens to be a `sub` instruction.
I could not come up with a test case for this -- the cases where
SCEVExpander decides to emit a `sub` instruction is quite small, and I
cannot think of a way I'd be able to get SCEV to prove that the
increment does not overflow in those cases.
Differential Revision: http://reviews.llvm.org/D7899
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230673 91177308-0d34-0410-b5e6-96231b3b80d8
On 32bits x86 Darwin, the register mappings for the eh_frane and
debug_frame sections are different. Thus the same CFI instructions
should result in different registers in the object file. The
problem isn't target specific though, but it requires that the
mappings for EH register numbers be different from the standard
Dwarf one.
The patch looks a bit clumsy. LLVM uses the EH mapping as
canonical for everything frame related. Thus we need to do a
double conversion EH -> LLVM -> Non-EH, when emitting the
debug_frame section.
Fixes PR22363.
Differential Revision: http://reviews.llvm.org/D7593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230670 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine has long had logic to convert aligned Altivec load/store intrinsics
into regular loads and stores. This mirrors that functionality for QPX vector
load/store intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230660 91177308-0d34-0410-b5e6-96231b3b80d8
have the debugger step through each one individually. Turn off the
combine for adjacent stores at -O0 so we get this behavior.
Possibly, DAGCombine shouldn't run at all at -O0, but that's for
another day; see PR22346.
Differential Revision: http://reviews.llvm.org/D7181
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230659 91177308-0d34-0410-b5e6-96231b3b80d8
The gold plugin never calls MaterializeModule, so any old debug info
was not deleted and could cause crashes.
Now that it is being "upgraded", the plugin also has to handle warnings
and create Modules with a nice id (it shows in the warning).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230655 91177308-0d34-0410-b5e6-96231b3b80d8
In case of "krait" CPU, asm printer doesn't emit any ".cpu" so the
features bits are not computed. This patch lets the asm printer
emit ".cpu cortex-a9" directive for krait and the hwdiv feature is
enabled through ".arch_extension". In short, krait is treated
as "cortex-a9" with hwdiv. We can not emit ".krait" as CPU since
it is not supported bu GNU GAS yet
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230651 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is in response to r223147 where the avaiable features are
computed based on ".cpu" directive. This will work clean for the standard
variants like cortex-a9. For custom variants which rely on standard cpu names
for assembly, the additional features of a CPU should be propagated. This can be
done via ".arch_extension" as long as the assembler supports it. The
implementation for krait along with unit test will be submitted in next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230650 91177308-0d34-0410-b5e6-96231b3b80d8
accesses are via different types
Noticed this while generalizing the code for loop distribution.
I confirmed with Arnold that this was indeed a bug and managed to create
a testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230647 91177308-0d34-0410-b5e6-96231b3b80d8
Turns out that after the past MMX commits, we don't need to rely on this
flag to get better codegen for MMX. Also update the tests to become
triple neutral.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230637 91177308-0d34-0410-b5e6-96231b3b80d8
The latency for the WriteMULm class was set to 4, which is actually lower than the latency for WriteMULr (5).
A better estimate would be 4 added to WriteMULr, that is, 9.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230634 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine has logic to convert aligned Altivec load/store intrinsics into
regular loads and stores. Unfortunately, there seems to be no regression test
covering this behavior. Adding one...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230632 91177308-0d34-0410-b5e6-96231b3b80d8
formulaic into the top v8i16 lowering routine.
This makes the generalized lowering a completely general and single path
lowering which will allow generalizing it in turn for multiple 128-bit
lanes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230623 91177308-0d34-0410-b5e6-96231b3b80d8
IRCE can now split the iteration space for loops like:
for (i = n; i >= 0; i--)
a[i + k] = 42; // bounds check on access
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230618 91177308-0d34-0410-b5e6-96231b3b80d8
Add `CHECK-SAME`, which requires that the pattern matches on the *same*
line as the previous `CHECK`/`CHECK-NEXT` -- in other words, no newline
is allowed in the skipped region. This is similar to `CHECK-NEXT`,
which requires exactly 1 newline in the skipped region.
My motivation is to simplify checking the long lines of LLVM assembly
for the new debug info hierarchy. This allows CHECK sequences like the
following:
CHECK: ![[REF]] = !SomeMDNode(
CHECK-SAME: file: ![[FILE:[0-9]+]]
CHECK-SAME: otherField: 93{{[,)]}}
which is equivalent to:
CHECK: ![[REF]] = !SomeMDNode({{.*}}file: ![[FILE:[0-9]+]]{{.*}}otherField: 93{{[,)]}}
While this example just has two fields, many nodes in debug info have
more than that. `CHECK-SAME` will keep the logic easy to follow.
Morever, it enables interleaving `CHECK-NOT`s without allowing newlines.
Consider the following:
CHECK: ![[REF]] = !SomeMDNode(
CHECK-SAME: file: ![[FILE:[0-9]+]]
CHECK-NOT: unexpectedField:
CHECK-SAME: otherField: 93{{[,)]}}
CHECK-NOT: otherUnexpectedField:
CHECK-SAME: )
which doesn't seem to have an equivalent `CHECK` line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230612 91177308-0d34-0410-b5e6-96231b3b80d8
Also remove the somewhat misleading initializers from
VectorizationFactor and VectorizationInterleave. They will get
initialized with the default ctor since no cl::init is provided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230608 91177308-0d34-0410-b5e6-96231b3b80d8
When I originally committed the statepoint docs, I left placeholders for example IR fragments. I'm finally getting around to filling those in.
I also added IR fragments to illustrate the usage of the PlaceSafepoints pass while I was at it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230601 91177308-0d34-0410-b5e6-96231b3b80d8
It still prints "Assembling path/to/X86CompilationCallback_Win64.asm",
but linking does the same thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230596 91177308-0d34-0410-b5e6-96231b3b80d8
Use the IRBuilder helpers for gc.statepoint and gc.result, instead of
coding the construction by hand. Note that the gc.statepoint IRBuilder
handles only CallInst, not InvokeInst; retain that part of hand-coding.
Differential Revision: http://reviews.llvm.org/D7518
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230591 91177308-0d34-0410-b5e6-96231b3b80d8
Explanation: This function is in TargetLowering because it uses
RegClassForVT which would need to be moved to TargetRegisterInfo
and would necessitate moving isTypeLegal over as well - a massive
change that would just require TargetLowering having a TargetRegisterInfo
class member that it would use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230585 91177308-0d34-0410-b5e6-96231b3b80d8
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230583 91177308-0d34-0410-b5e6-96231b3b80d8
Add a brief section linking to the experimental statepoint intrinsics analogous to the one we have linking to patchpoint.
While I'm here, cleanup some wording about what the gc "name" attribute actually means. It's not the name of a *collector* it's the name of the *strategy* which may be compatible with multiple collectors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230576 91177308-0d34-0410-b5e6-96231b3b80d8
