"half precision" floating-point with a first-class type.
This patch adds basic IR support (but not codegen support).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146786 91177308-0d34-0410-b5e6-96231b3b80d8
files. First, add a new block USELIST_BLOCK to the bitcode format. This is
where USELIST_CODE_ENTRYs will be stored. The format of the USELIST_CODE_ENTRYs
have not yet been defined. Add support in the BitcodeReader for parsing the
USELIST_BLOCK.
Part of rdar://9860654 and PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146078 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the 'landingpad' instruction. It's used to indicate that a basic
block is a landing pad. There are several restrictions on its use (see
LangRef.html for more detail). These restrictions allow the exception handling
code to gather the information it needs in a much more sane way.
This patch has the definition, implementation, C interface, parsing, and bitcode
support in it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137501 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the 'resume' instruction class, IR parsing, and bitcode reading and
writing. The 'resume' instruction resumes propagation of an existing (in-flight)
exception whose unwinding was interrupted with a 'landingpad' instruction (to be
added later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136589 91177308-0d34-0410-b5e6-96231b3b80d8
'atomicrmw' instructions, which allow representing all the current atomic
rmw intrinsics.
The allowed operands for these instructions are heavily restricted at the
moment; we can probably loosen it a bit, but supporting general
first-class types (where it makes sense) might get a bit complicated,
given how SelectionDAG works.
As an initial cut, these operations do not support specifying an alignment,
but it would be possible to add if we think it's useful. Specifying an
alignment lower than the natural alignment would be essentially
impossible to support on anything other than x86, but specifying a greater
alignment would be possible. I can't think of any useful optimizations which
would use that information, but maybe someone else has ideas.
Optimizer/codegen support coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136404 91177308-0d34-0410-b5e6-96231b3b80d8
This is just a LangRef entry and reading/writing/memory representation; optimizer+codegen support coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136009 91177308-0d34-0410-b5e6-96231b3b80d8
patch brings numerous advantages to LLVM. One way to look at it
is through diffstat:
109 files changed, 3005 insertions(+), 5906 deletions(-)
Removing almost 3K lines of code is a good thing. Other advantages
include:
1. Value::getType() is a simple load that can be CSE'd, not a mutating
union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
uniques them. This means that the compiler doesn't merge them structurally
which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead
"const Type *" everywhere.
Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.
"LLVM 3.0" is the right time to do this.
There are still some cleanups pending after this, this patch is large enough
as-is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134829 91177308-0d34-0410-b5e6-96231b3b80d8
pointing to the range [first character, last character] instead of just not
after the last character. Patch by Yan Ivnitskiy!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133867 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r129235 into '.':
D test/Feature/bb_attrs.ll
U include/llvm/BasicBlock.h
U include/llvm/Bitcode/LLVMBitCodes.h
U lib/VMCore/AsmWriter.cpp
U lib/VMCore/BasicBlock.cpp
U lib/AsmParser/LLParser.cpp
U lib/AsmParser/LLLexer.cpp
U lib/AsmParser/LLToken.h
U lib/Bitcode/Reader/BitcodeReader.cpp
U lib/Bitcode/Writer/BitcodeWriter.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129259 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a "landing pad" attribute to the BasicBlock.
* Modify the bitcode reader and writer to handle said attribute.
Later: The verifier will ensure that the landing pad attribute is used in the
appropriate manner. I.e., not applied to the entry block, and applied only to
basic blocks that are branched to via a `dispatch' instruction.
(This is a work-in-progress.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129235 91177308-0d34-0410-b5e6-96231b3b80d8
(The Ada bindings probably need it too, but all the
obvious places to change say "do not edit this file".)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113618 91177308-0d34-0410-b5e6-96231b3b80d8
is different from what the code now uses in a two ways: NamedMDNodes
were considered Values and included in the numbering, and the
function-local metadata counter wasn't reset between functions.
The later problem breaks lazy deserialization, so instead of trying
to emulate the old numbering, just drop the old metadata. The only
in-tree use case is debug info with LTO, where the QOI loss is
considered acceptable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113557 91177308-0d34-0410-b5e6-96231b3b80d8
it to be the caller's responsibility to provide a stream in binary
mode. This fixes a layering violation and avoids an outs() call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104878 91177308-0d34-0410-b5e6-96231b3b80d8
having the bitcode writer materialize mdnodes for all the
debug location tuples when writing out the bc file and
stores the information in a more compact form. For example,
the -O0 -g bc file for combine.c in 176.gcc shrinks from
739392 to 512096 bytes.
This concludes my planned short-term debug info work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100261 91177308-0d34-0410-b5e6-96231b3b80d8
Modules and ModuleProviders. Because the "ModuleProvider" simply materializes
GlobalValues now, and doesn't provide modules, it's renamed to
"GVMaterializer". Code that used to need a ModuleProvider to materialize
Functions can now materialize the Functions directly. Functions no longer use a
magic linkage to record that they're materializable; they simply ask the
GVMaterializer.
Because the C ABI must never change, we can't remove LLVMModuleProviderRef or
the functions that refer to it. Instead, because Module now exposes the same
functionality ModuleProvider used to, we store a Module* in any
LLVMModuleProviderRef and translate in the wrapper methods. The bindings to
other languages still use the ModuleProvider concept. It would probably be
worth some time to update them to follow the C++ more closely, but I don't
intend to do it.
Fixes http://llvm.org/PR5737 and http://llvm.org/PR5735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94686 91177308-0d34-0410-b5e6-96231b3b80d8
isPodLike type trait. This is a generally useful type trait for
more than just DenseMap, and we really care about whether something
acts like a pod, not whether it really is a pod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91421 91177308-0d34-0410-b5e6-96231b3b80d8
isRawBitcode and isBitcode to allow clients to test whether a given
memory buffer holds a bitcode image.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80804 91177308-0d34-0410-b5e6-96231b3b80d8
not 64, because we read at most 32 bits at a time. OTOH, "Result" must
be 64-bits and insertion into it must be 64-bit clean. Thanks to Ivan
Sorokin for bringing this up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74932 91177308-0d34-0410-b5e6-96231b3b80d8
of the bitcode reader and ASM parser APIs, as well as supporting it in all of the tools.
Patches for Clang and LLVM-GCC to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74614 91177308-0d34-0410-b5e6-96231b3b80d8
BLOCKNAME and SETRECORDNAME. This allows a bitcode
file to be self describing with pretty names for
records and blocks in addition to numbers. This
enhances llvm-bcanalyzer to use this to print prettily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70165 91177308-0d34-0410-b5e6-96231b3b80d8
state out of the BitstreamReader class into a BitstreamCursor class.
Doing this allows the client to have multiple cursors into the same
file, each with potentially different live block stacks and
abbreviation records.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70157 91177308-0d34-0410-b5e6-96231b3b80d8
elements in a form that is efficient for the reader to just get a
pointer in memory and start reading. APIs to do efficient reading
and writing are still todo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68465 91177308-0d34-0410-b5e6-96231b3b80d8
Constant, MDString and MDNode which can only be used by globals with a name
that starts with "llvm." or as arguments to a function with the same naming
restriction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68420 91177308-0d34-0410-b5e6-96231b3b80d8
is appropriate. This helps visually differentiate host-oriented
calculations from target-oriented calculations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68227 91177308-0d34-0410-b5e6-96231b3b80d8
