SGPRs are written by instructions that sometimes will ignore control flow,
which means if you have code like:
if (VGPR0) {
SGPR0 = S_MOV_B32 0
} else {
SGPR0 = S_MOV_B32 1
}
The value of SGPR0 will 1 no matter what the condition is.
In order to deal with this situation correctly, we need to view the
program as if it were a single basic block when we calculate the
live ranges for the SGPRs. They way we actually update the live
range is by iterating over all of the segments in each LiveRange
object and setting the end of each segment equal to the start of
the next segment. So a live range like:
[3888r,9312r:0)[10032B,10384B:0) 0@3888r
will become:
[3888r,10032B:0)[10032B,10384B:0) 0@3888r
This change will allow us to use SALU instructions within branches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212215 91177308-0d34-0410-b5e6-96231b3b80d8
We can't use SALU instructions for this since they ignore the EXEC mask
and are always executed.
This fixes several OpenCV tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207661 91177308-0d34-0410-b5e6-96231b3b80d8
I think, in principle, intrinsics_gen may be added explicitly.
That said, it can be added incidentally, since each target already has dependencies to llvm-tblgen.
Almost all source files depend on both CommonTaleGen and intrinsics_gen.
Explicit add_dependencies() have been pruned under lib/Target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195929 91177308-0d34-0410-b5e6-96231b3b80d8
add_public_tablegen_target adds *CommonTableGen to LLVM_COMMON_DEPENDS.
LLVM_COMMON_DEPENDS affects add_llvm_library (and other add_target stuff) within its scope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195927 91177308-0d34-0410-b5e6-96231b3b80d8
The AMDGPUIndirectAddressing pass was previously responsible for
lowering private loads and stores to indirect addressing instructions.
However, this pass was buggy and way too complicated. The only
advantage it had over the new simplified code was that it saved one
instruction per direct write to private memory. This optimization
likely has a minimal impact on performance, and we may be able
to duplicate it using some other transformation.
For the private address space, we now:
1. Lower private loads/store to Register(Load|Store) instructions
2. Reserve part of the register file as 'private memory'
3. After regalloc lower the Register(Load|Store) instructions to
MOV instructions that use indirect addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193179 91177308-0d34-0410-b5e6-96231b3b80d8
Now that compute support is better on SI, we can't continue using v16i8
for descriptors since this is also a legal type in OpenCL.
This patch fixes numerous hangs with the piglit OpenCL test and since
we now use a target specific DAG node for LOAD_CONSTANT with the
correct MemOperandFlags, this should also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=66805
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188429 91177308-0d34-0410-b5e6-96231b3b80d8
Without explicit dependencies, both per-file action and in-CommonTableGen action could run in parallel.
It races to emit *.inc files simultaneously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187780 91177308-0d34-0410-b5e6-96231b3b80d8
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches. The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.
Patch by: Mei Ye
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187278 91177308-0d34-0410-b5e6-96231b3b80d8
This should simplify the subtarget definitions and make it easier to
add new ones.
Reviewed-by: Vincent Lejeune <vljn@ovi.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183566 91177308-0d34-0410-b5e6-96231b3b80d8
Previously commited @183279 but tests were failing, reverted @183286
It was broken because @183336 was missing, now it's there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183343 91177308-0d34-0410-b5e6-96231b3b80d8
v2: update CMakeLists.txt as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176626 91177308-0d34-0410-b5e6-96231b3b80d8
Only implemented for R600 so far. SI is missing implementations of a
few callbacks used by the Indirect Addressing pass and needs code to
handle frame indices.
At the moment R600 only supports array sizes of 16 dwords or less.
Register packing of vector types is currently disabled, which means that a
vec4 is stored in T0_X, T1_X, T2_X, T3_X, rather than T0_XYZW. In order
to correctly pack registers in all cases, we will need to implement an
analysis pass for R600 that determines the correct vector width for each
array.
v2:
- Add support for i8 zext load from stack.
- Coding style fixes
v3:
- Don't reserve registers for indirect addressing when it isn't
being used.
- Fix bug caused by LLVM limiting the number of SubRegIndex
declarations.
v4:
- Fix 64-bit defines
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174525 91177308-0d34-0410-b5e6-96231b3b80d8
Remove Cxxx registers, add new special register - "ALU_CONST" and new
operand for each alu src - "sel". ALU_CONST is used to designate that the
new operand contains the value to override src.sel, src.kc_bank, src.chan
for constants in the driver.
Patch by: Vadim Girlin
Vincent Lejeune:
- Use pointers for constants
- Fold CONST_ADDRESS when possible
Tom Stellard:
- Give CONSTANT_BUFFER_0 its own address space
- Use integer types for constant loads
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173222 91177308-0d34-0410-b5e6-96231b3b80d8
Some instructions like memory reads/writes are executed
asynchronously, so we need to insert S_WAITCNT instructions
to block before accessing their results. Previously we have
just inserted S_WAITCNT instructions after each async
instruction, this patch fixes this and adds a prober
insertion pass.
Patch by: Christian König
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Christian König <deathsimple@vodafone.de>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172846 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the control flow handling with a new
pass which structurize the graph before transforming it to
machine instruction. This has a couple of different advantages
and currently fixes 20 piglit tests without a single regression.
It is now a general purpose transformation that could be not
only be used for SI/R6xx, but also for other hardware
implementations that use a form of structurized control flow.
v2: further cleanup, fixes and documentation
Patch by: Christian König
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170591 91177308-0d34-0410-b5e6-96231b3b80d8
