to the build being C++11.
There is clearly still plenty of simplification than can be done here by
using standard type traits instead of rolling our own in many places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202586 91177308-0d34-0410-b5e6-96231b3b80d8
on the fact that we now build in C++11 mode with modern compilers. This
should flush out any issues. If the build bots are happy with this, I'll
GC all the code for coping without R-value references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202574 91177308-0d34-0410-b5e6-96231b3b80d8
The previous PBQP solver was very robust but consumed a lot of memory,
performed a lot of redundant computation, and contained some unnecessarily tight
coupling that prevented experimentation with novel solution techniques. This new
solver is an attempt to address these shortcomings.
Important/interesting changes:
1) The domain-independent PBQP solver class, HeuristicSolverImpl, is gone.
It is replaced by a register allocation specific solver, PBQP::RegAlloc::Solver
(see RegAllocSolver.h).
The optimal reduction rules and the backpropagation algorithm have been extracted
into stand-alone functions (see ReductionRules.h), which can be used to build
domain specific PBQP solvers. This provides many more opportunities for
domain-specific knowledge to inform the PBQP solvers' decisions. In theory this
should allow us to generate better solutions. In practice, we can at least test
out ideas now.
As a side benefit, I believe the new solver is more readable than the old one.
2) The solver type is now a template parameter of the PBQP graph.
This allows the graph to notify the solver of any modifications made (e.g. by
domain independent rules) without the overhead of a virtual call. It also allows
the solver to supply policy information to the graph (see below).
3) Significantly reduced memory overhead.
Memory management policy is now an explicit property of the PBQP graph (via
the CostAllocator typedef on the graph's solver template argument). Because PBQP
graphs for register allocation tend to contain many redundant instances of
single values (E.g. the value representing an interference constraint between
GPRs), the new RASolver class uses a uniquing scheme. This massively reduces
memory consumption for large register allocation problems. For example, looking
at the largest interference graph in each of the SPEC2006 benchmarks (the
largest graph will always set the memory consumption high-water mark for PBQP),
the average memory reduction for the PBQP costs was 400x. That's times, not
percent. The highest was 1400x. Yikes. So - this is fixed.
"PBQP: No longer feasting upon every last byte of your RAM".
Minor details:
- Fully C++11'd. Never copy-construct another vector/matrix!
- Cute tricks with cost metadata: Metadata that is derived solely from cost
matrices/vectors is attached directly to the cost instances themselves. That way
if you unique the costs you never have to recompute the metadata. 400x less
memory means 400x less cost metadata (re)computation.
Special thanks to Arnaud de Grandmaison, who has been the source of much
encouragement, and of many very useful test cases.
This new solver forms the basis for future work, of which there's plenty to do.
I will be adding TODO notes shortly.
- Lang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202551 91177308-0d34-0410-b5e6-96231b3b80d8
during the finalization for CGDebugInfo in clang we would RAUW
a type and it would result in a corrupted MDNode for an
imported declaration.
Testcase pending as reducing has been difficult.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202540 91177308-0d34-0410-b5e6-96231b3b80d8
We were only using it so find the shared library extension and nm. There are
simpler ways to do those things :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202524 91177308-0d34-0410-b5e6-96231b3b80d8
A 'remark' is information that is not an error or a warning, but rather some
additional information provided to the user. In contrast to a 'note' a 'remark'
is an independent diagnostic, whereas a 'note' always depends on another
diagnostic.
A typical use case for remark nodes is information provided to the user, e.g.
information provided by the vectorizer about loops that have been vectorized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202474 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, it is currently impossible to use a PatFrag as part of an output
pattern (the part of the pattern that has instructions in it) in TableGen.
Looking at the current implementation, this was clearly intended to work (there
is already code in place to expand patterns in the output DAG), but is
currently broken by the baked-in type-checking assumption and the order in which
the pattern fragments are processed (output pattern fragments need to be
processed after the instruction definitions are processed).
Fixing this is fairly simple, but requires some way of differentiating output
patterns from the existing input patterns. The simplest way to handle this
seems to be to create a subclass of PatFrag, and so that's what I've done here.
As a simple example, this allows us to write:
def crnot : OutPatFrag<(ops node:$in),
(CRNOR $in, $in)>;
def : Pat<(not i1:$in),
(crnot $in)>;
which captures the core use case: handling of repeated subexpressions inside
of complicated output patterns.
This will be used by an upcoming commit to the PowerPC backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202450 91177308-0d34-0410-b5e6-96231b3b80d8
This is the data structure listed on Microsoft PE/COFF Spec Revision 8.3, p. 80.
The name of the struct is not mentioned in the Microsoft PE/COFF spec, so I made
it up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202438 91177308-0d34-0410-b5e6-96231b3b80d8
This is a temporary workaround for native arm linux builds:
PR18996: Changing regalloc order breaks "lencod" on native arm linux builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202433 91177308-0d34-0410-b5e6-96231b3b80d8
Some MC components like Target Streamers or Assembly Parsers
may need to access the relocation model in order to expand
some directives and/or assembly macros.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202418 91177308-0d34-0410-b5e6-96231b3b80d8
and update everything accordingly. This can be used to conditionalize
the amount of output in the backend based on the amount of debug
requested/metadata emission scheme by a front end (e.g. clang).
Paired with a commit to clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202332 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes spurious warnings in llvm-link about the datalayout not matching.
Thanks to Zalman Stern for reporting the bug!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202276 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have any test with more than 6 address spaces, so a DenseMap is
probably not the correct answer.
An unsorted array would also be OK, but we have to sort it for printing anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202275 91177308-0d34-0410-b5e6-96231b3b80d8
The table argument is always 128-bit (and interpreted as <16 x i8>) so the
extra specifier for it is just clutter.
No user-visible behaviour change, so no tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202258 91177308-0d34-0410-b5e6-96231b3b80d8
Prevent a crash in the SmallDenseMap copy constructor whenever the other
map is not in small mode.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202206 91177308-0d34-0410-b5e6-96231b3b80d8
Eventually DataLayoutPass should go away, but for now that is the only easy
way to get a DataLayout in some APIs. This patch only changes the ones that
have easy access to a Module.
One interesting issue with sometimes using DataLayoutPass and sometimes
fetching it from the Module is that we have to make sure they are equivalent.
We can get most of the way there by always constructing the pass with a Module.
In fact, the pass could be changed to point to an external DataLayout instead
of owning one to make this stricter.
Unfortunately, the C api passes a DataLayout, so it has to be up to the caller
to make sure the pass and the module are in sync.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202204 91177308-0d34-0410-b5e6-96231b3b80d8
No tool does this currently, but as everything else in a module we should be
able to change its DataLayout.
Most of the fix is in DataLayout to make sure it can be reset properly.
The test uses Module::setDataLayout since the fact that we mutate a DataLayout
is an implementation detail. The module could hold a OwningPtr<DataLayout> and
the DataLayout itself could be immutable.
Thanks to Philip Reames for pushing me in the right direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202198 91177308-0d34-0410-b5e6-96231b3b80d8
Now that DataLayout is not a pass, store one in Module.
Since the C API expects to be able to get a char* to the datalayout description,
we have to keep a std::string somewhere. This patch keeps it in Module and also
uses it to represent modules without a DataLayout.
Once DataLayout is mandatory, we should probably move the string to DataLayout
itself since it won't be necessary anymore to represent the special case of a
module without a DataLayout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202190 91177308-0d34-0410-b5e6-96231b3b80d8
Variadic functions have an unspecified parameter tag after the last
argument. In IR this is represented as an unspecified parameter in the
subroutine type.
Paired commit with CFE r202185.
rdar://problem/13690847
This re-applies r202184 + a bugfix in DwarfDebug's argument handling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202188 91177308-0d34-0410-b5e6-96231b3b80d8
