Fixes exponential compilation complexity in PR19835, caused by
LICM::sink not handling the following pattern well:
f = op g
e = op f, g
d = op e
c = op d, e
b = op c
a = op b, c
When an instruction with N uses is sunk, each of its operands gets N
new uses (all of them - phi nodes). In the example above, if a had 1
use, c would have 2, e would have 4, and g would have 8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211673 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR18753 and PR18782.
This is necessary for LICM to preserve LCSSA correctly and efficiently.
There is still some active discussion about whether we should be using
LCSSA, but we can't just immediately stop using it and we *need* LICM to
preserve it while we are using it. We can restore the old SSAUpdater
driven code if and when there is a serious effort to remove the reliance
on LCSSA from all of the loop passes.
However, this also serves as a great example of why LCSSA is very nice
to have. This change significantly simplifies the process of sinking
instructions for LICM, and makes it quite a bit less expensive.
It wouldn't even be as complex as it is except that I had to start the
process of removing the big recursive LCSSA formation hammer in order to
switch even this much of the re-forming code to asserting that LCSSA was
preserved. I'll fully remove that next just to tidy things up until the
LCSSA debate settles one way or the other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201148 91177308-0d34-0410-b5e6-96231b3b80d8
LCSSA when we promote to SSA registers inside of LICM.
Currently, this is actually necessary. The promotion logic in LICM uses
SSAUpdater which doesn't understand how to place LCSSA PHI nodes.
Teaching it to do so would be a very significant undertaking. It may be
worthwhile and I've left a FIXME about this in the code as well as
starting a thread on llvmdev to try to figure out the right long-term
solution.
For now, the PR needs to be fixed. Short of using the promition
SSAUpdater to place both the LCSSA PHI nodes and the promoted PHI nodes,
I don't see a cleaner or cheaper way of achieving this. Fortunately,
LCSSA is relatively lazy and sparse -- it should only update
instructions which need it. We can also skip the recursive variant when
we don't promote to SSA values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200612 91177308-0d34-0410-b5e6-96231b3b80d8
the loops in a function, and teach LICM to work in the presance of
LCSSA.
Previously, LCSSA was a loop pass. That made passes requiring it also be
loop passes and unable to depend on function analysis passes easily. It
also caused outer loops to have a different "canonical" form from inner
loops during analysis. Instead, we go into LCSSA form and preserve it
through the loop pass manager run.
Note that this has the same problem as LoopSimplify that prevents
enabling its verification -- loop passes which run at the end of the loop
pass manager and don't preserve these are valid, but the subsequent loop
pass runs of outer loops that do preserve this pass trigger too much
verification and fail because the inner loop no longer verifies.
The other problem this exposed is that LICM was completely unable to
handle LCSSA form. It didn't preserve it and it actually would give up
on moving instructions in many cases when they were used by an LCSSA phi
node. I've taught LICM to support detecting LCSSA-form PHI nodes and to
hoist and sink around them. This may actually let LICM fire
significantly more because we put everything into LCSSA form to rotate
the loop before running LICM. =/ Now LICM should handle that fine and
preserve it correctly. The down side is that LICM has to require LCSSA
in order to preserve it. This is just a fact of life for LCSSA. It's
entirely possible we should completely remove LCSSA from the optimizer.
The test updates are essentially accomodating LCSSA phi nodes in the
output of LICM, and the fact that we now completely sink every
instruction in ashr-crash below the loop bodies prior to unrolling.
With this change, LCSSA is computed only three times in the pass
pipeline. One of them could be removed (and potentially a SCEV run and
a separate LoopPassManager entirely!) if we had a LoopPass variant of
InstCombine that ran InstCombine on the loop body but refused to combine
away LCSSA PHI nodes. Currently, this also prevents loop unrolling from
being in the same loop pass manager is rotate, LICM, and unswitch.
There is one thing that I *really* don't like -- preserving LCSSA in
LICM is quite expensive. We end up having to re-run LCSSA twice for some
loops after LICM runs because LICM can undo LCSSA both in the current
loop and the parent loop. I don't really see good solutions to this
other than to completely move away from LCSSA and using tools like
SSAUpdater instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200067 91177308-0d34-0410-b5e6-96231b3b80d8
We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.
Make tests more robust by removing hard-coded metadata numbers in CHECK lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195535 91177308-0d34-0410-b5e6-96231b3b80d8
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192018 91177308-0d34-0410-b5e6-96231b3b80d8
on platforms with relocations in debug info and also temporarily
revert r191800 due to conflicts with the revert of r191792.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191967 91177308-0d34-0410-b5e6-96231b3b80d8
is updated to use DITypeRef.
Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static
helper functions in DwarfCompileUnit. We already have a static helper function
"isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to
resolve the derived-from field. All three functions need to go across link
for derived-from fields, so we need to get hold of a type identifier map.
A pointer to DwarfDebug is also added to DbgVariable in order to resolve the
derived-from field.
Debug info verifier is updated to check a derived-from field is a TypeRef.
Verifier will not go across link for derived-from fields, in debug info finder,
we go across the link to add derived-from fields to types.
Function getDICompositeType is only used by dragonegg and since dragonegg does
not generate identifier for types, we use an empty map to resolve the
derived-from field.
When printing a derived-from field, we use DITypeRef::getName to either return
the type identifier or getName of the DIType.
A paired commit at clang is required due to changes to DIBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191800 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the command line argument "struct-path-tbaa" since we should not depend
on command line argument to decide which format the IR file is using. Instead,
we check the first operand of the tbaa tag node, if it is a MDNode, we treat
it as struct-path aware TBAA format, otherwise, we treat it as scalar TBAA
format.
When clang starts to use struct-path aware TBAA format no matter whether
struct-path-tbaa is no, and we can auto-upgrade existing bc files, the support
for scalar TBAA format can be dropped.
Existing testing cases are updated to use the struct-path aware TBAA format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191538 91177308-0d34-0410-b5e6-96231b3b80d8
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190205 91177308-0d34-0410-b5e6-96231b3b80d8
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.
Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.
Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189282 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
Also always add DIType, DISubprogram and DIGlobalVariable to the list
in DebugInfoFinder without checking them, so we can verify them later
on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187285 91177308-0d34-0410-b5e6-96231b3b80d8
This conversion was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186269 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting
AArch64 by default has been built, but fail if a native AArch64 compiler has
been build. Therefore XFAIL is inappropriate and we mark them unsupported.
ExecutionEngine tests are JIT by definition, they should also be unsupported.
Transforms/LICM only uses the interpreter to check the output is still sane
after optimisation. It can be switched to use an interpreter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175433 91177308-0d34-0410-b5e6-96231b3b80d8
Scan the body of the loop and find instructions that may trap.
Use this information when deciding if it is safe to hoist or sink instructions.
Notice that we can optimize the search of instructions that may throw in the case of nested loops.
rdar://11518836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163132 91177308-0d34-0410-b5e6-96231b3b80d8
multiple scalar promotions on a single loop. This also has the effect of
preserving the order of stores sunk out of loops, which is aesthetically
pleasing, and it happens to fix the testcase in PR13542, though it doesn't
fix the underlying problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161459 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
into Analysis as a standalone function, since there's no need for
it to be in VMCore. Also, update it to use isKnownNonZero and
other goodies available in Analysis, making it more precise,
enabling more aggressive optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146610 91177308-0d34-0410-b5e6-96231b3b80d8
of the instruction.
Note that this change affects the existing non-atomic load and store
instructions; the parser now accepts both forms, and the change is noted
in the release notes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137527 91177308-0d34-0410-b5e6-96231b3b80d8
The promotion code lost any alignment information, when hoisting loads and
stores out of the loop. This lead to incorrect aligned memory accesses. We now
use the largest alignment we can prove to be correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134520 91177308-0d34-0410-b5e6-96231b3b80d8
is equivalent to any other relevant value; it isn't true in general.
If it is equivalent, the LoopPromoter will tell the AST the equivalence.
Also, delete the PreheaderLoad if it is unused.
Chris, since you were the last one to make major changes here, can you check
that this is sane?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129049 91177308-0d34-0410-b5e6-96231b3b80d8
