The enterBasicBlock() function is combining live-out values from
predecessor blocks. The RPO traversal means that more predecessors
have been visited when that happens, only back-edges are missing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144025 91177308-0d34-0410-b5e6-96231b3b80d8
to fix the types section (all types, not just global types), and testcases.
The code to do the final emission is disabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143923 91177308-0d34-0410-b5e6-96231b3b80d8
the pubnames and pubtypes tables. LLDB can currently use this format
and a full spec is forthcoming and submission for standardization is planned.
A basic summary:
The dwarf accelerator tables are an indirect hash table optimized
for null lookup rather than access to known data. They are output into
an on-disk format that looks like this:
.-------------.
| HEADER |
|-------------|
| BUCKETS |
|-------------|
| HASHES |
|-------------|
| OFFSETS |
|-------------|
| DATA |
`-------------'
where the header contains a magic number, version, type of hash function,
the number of buckets, total number of hashes, and room for a special
struct of data and the length of that struct.
The buckets contain an index (e.g. 6) into the hashes array. The hashes
section contains all of the 32-bit hash values in contiguous memory, and
the offsets contain the offset into the data area for the particular
hash.
For a lookup example, we could hash a function name and take it modulo the
number of buckets giving us our bucket. From there we take the bucket value
as an index into the hashes table and look at each successive hash as long
as the hash value is still the same modulo result (bucket value) as earlier.
If we have a match we look at that same entry in the offsets table and
grab the offset in the data for our final match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143921 91177308-0d34-0410-b5e6-96231b3b80d8
into the function. Reflect that here so that the array will be placed next to
the SP.
<rdar://problem/10128329>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143590 91177308-0d34-0410-b5e6-96231b3b80d8
the mailing list. Suggestions for other statistics to collect would be
awesome. =]
Currently these are implemented as a separate pass guarded by a separate
flag. I'm not thrilled by that, but I wanted to be able to collect the
statistics for the old code placement as well as the new in order to
have a point of comparison. I'm planning on folding them into the single
pass if / when there is only one pass of interest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143537 91177308-0d34-0410-b5e6-96231b3b80d8
If all of the inputs are zero/any_extended, create a new simple BV
which can be further optimized by other BV optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143297 91177308-0d34-0410-b5e6-96231b3b80d8
fixes: Use a separate register, instead of SP, as the
calling-convention resource, to avoid spurious conflicts with
actual uses of SP. Also, fix unscheduling of calling sequences,
which can be triggered by pseudo-two-address dependencies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143206 91177308-0d34-0410-b5e6-96231b3b80d8
Don't assume APInt::getRawData() would hold target-aware endianness nor host-compliant endianness. rawdata[0] holds most lower i64, even on big endian host.
FIXME: Add a testcase for big endian target.
FIXME: Ditto on CompileUnit::addConstantFPValue() ?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143194 91177308-0d34-0410-b5e6-96231b3b80d8
it fixes the dragonegg self-host (it looks like gcc is miscompiled).
Original commit messages:
Eliminate LegalizeOps' LegalizedNodes map and have it just call RAUW
on every node as it legalizes them. This makes it easier to use
hasOneUse() heuristics, since unneeded nodes can be removed from the
DAG earlier.
Make LegalizeOps visit the DAG in an operands-last order. It previously
used operands-first, because LegalizeTypes has to go operands-first, and
LegalizeTypes used to be part of LegalizeOps, but they're now split.
The operands-last order is more natural for several legalization tasks.
For example, it allows lowering code for nodes with floating-point or
vector constants to see those constants directly instead of seeing the
lowered form (often constant-pool loads). This makes some things
somewhat more complicated today, though it ought to allow things to be
simpler in the future. It also fixes some bugs exposed by Legalizing
using RAUW aggressively.
Remove the part of LegalizeOps that attempted to patch up invalid chain
operands on libcalls generated by LegalizeTypes, since it doesn't work
with the new LegalizeOps traversal order. Instead, define what
LegalizeTypes is doing to be correct, and transfer the responsibility
of keeping calls from having overlapping calling sequences into the
scheduler.
Teach the scheduler to model callseq_begin/end pairs as having a
physical register definition/use to prevent calls from having
overlapping calling sequences. This is also somewhat complicated, though
there are ways it might be simplified in the future.
This addresses rdar://9816668, rdar://10043614, rdar://8434668, and others.
Please direct high-level questions about this patch to management.
Delete #if 0 code accidentally left in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143188 91177308-0d34-0410-b5e6-96231b3b80d8
on every node as it legalizes them. This makes it easier to use
hasOneUse() heuristics, since unneeded nodes can be removed from the
DAG earlier.
Make LegalizeOps visit the DAG in an operands-last order. It previously
used operands-first, because LegalizeTypes has to go operands-first, and
LegalizeTypes used to be part of LegalizeOps, but they're now split.
The operands-last order is more natural for several legalization tasks.
For example, it allows lowering code for nodes with floating-point or
vector constants to see those constants directly instead of seeing the
lowered form (often constant-pool loads). This makes some things
somewhat more complicated today, though it ought to allow things to be
simpler in the future. It also fixes some bugs exposed by Legalizing
using RAUW aggressively.
Remove the part of LegalizeOps that attempted to patch up invalid chain
operands on libcalls generated by LegalizeTypes, since it doesn't work
with the new LegalizeOps traversal order. Instead, define what
LegalizeTypes is doing to be correct, and transfer the responsibility
of keeping calls from having overlapping calling sequences into the
scheduler.
Teach the scheduler to model callseq_begin/end pairs as having a
physical register definition/use to prevent calls from having
overlapping calling sequences. This is also somewhat complicated, though
there are ways it might be simplified in the future.
This addresses rdar://9816668, rdar://10043614, rdar://8434668, and others.
Please direct high-level questions about this patch to management.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143177 91177308-0d34-0410-b5e6-96231b3b80d8
trying to legalize the operand types when only the result type
is required to be legalized - the type legalization machinery
will get round to the operands later if they need legalizing.
There can be a point to legalizing operands in parallel with
the result: when this saves compile time or results in better
code. There was only one case in which this was true: when
the operand is also split, so keep the logic for that bit.
As a result of this change, additional operand legalization
methods may need to be introduced to handle nodes where the
result and operand types can differ, like SIGN_EXTEND, but
the testsuite doesn't contain any tests where this is the case.
In any case, it seems better to require such methods (and die
with an assert if they doesn't exist) than to quietly produce
wrong code if we forgot to special case the node in
SplitVecRes_UnaryOp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143026 91177308-0d34-0410-b5e6-96231b3b80d8
This code makes different decisions when compiled into x87 instructions
because of different rounding behavior. That caused phase 2/3
miscompares on 32-bit Linux when the phase 1 compiler was built with gcc
(using x87), and the phase 2 compiler was built with clang (using SSE).
This fixes PR11200.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143006 91177308-0d34-0410-b5e6-96231b3b80d8
An MBB which branches to an EH landing pad shouldn't be considered for tail merging.
In SjLj EH, the jump to the landing pad is not done explicitly through a branch
statement. The EH landing pad is added as a successor to the throwing
BB. Because of that however, the branch folding pass could mistakenly think that
it could merge the throwing BB with another BB. This isn't safe to do.
<rdar://problem/10334833>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143001 91177308-0d34-0410-b5e6-96231b3b80d8
