files. First, add a new block USELIST_BLOCK to the bitcode format. This is
where USELIST_CODE_ENTRYs will be stored. The format of the USELIST_CODE_ENTRYs
have not yet been defined. Add support in the BitcodeReader for parsing the
USELIST_BLOCK.
Part of rdar://9860654 and PR5680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146078 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the 'landingpad' instruction. It's used to indicate that a basic
block is a landing pad. There are several restrictions on its use (see
LangRef.html for more detail). These restrictions allow the exception handling
code to gather the information it needs in a much more sane way.
This patch has the definition, implementation, C interface, parsing, and bitcode
support in it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137501 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the 'resume' instruction class, IR parsing, and bitcode reading and
writing. The 'resume' instruction resumes propagation of an existing (in-flight)
exception whose unwinding was interrupted with a 'landingpad' instruction (to be
added later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136589 91177308-0d34-0410-b5e6-96231b3b80d8
'atomicrmw' instructions, which allow representing all the current atomic
rmw intrinsics.
The allowed operands for these instructions are heavily restricted at the
moment; we can probably loosen it a bit, but supporting general
first-class types (where it makes sense) might get a bit complicated,
given how SelectionDAG works.
As an initial cut, these operations do not support specifying an alignment,
but it would be possible to add if we think it's useful. Specifying an
alignment lower than the natural alignment would be essentially
impossible to support on anything other than x86, but specifying a greater
alignment would be possible. I can't think of any useful optimizations which
would use that information, but maybe someone else has ideas.
Optimizer/codegen support coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136404 91177308-0d34-0410-b5e6-96231b3b80d8
This is just a LangRef entry and reading/writing/memory representation; optimizer+codegen support coming soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136009 91177308-0d34-0410-b5e6-96231b3b80d8
patch brings numerous advantages to LLVM. One way to look at it
is through diffstat:
109 files changed, 3005 insertions(+), 5906 deletions(-)
Removing almost 3K lines of code is a good thing. Other advantages
include:
1. Value::getType() is a simple load that can be CSE'd, not a mutating
union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
uniques them. This means that the compiler doesn't merge them structurally
which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead
"const Type *" everywhere.
Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.
"LLVM 3.0" is the right time to do this.
There are still some cleanups pending after this, this patch is large enough
as-is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134829 91177308-0d34-0410-b5e6-96231b3b80d8
pointing to the range [first character, last character] instead of just not
after the last character. Patch by Yan Ivnitskiy!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133867 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r129235 into '.':
D test/Feature/bb_attrs.ll
U include/llvm/BasicBlock.h
U include/llvm/Bitcode/LLVMBitCodes.h
U lib/VMCore/AsmWriter.cpp
U lib/VMCore/BasicBlock.cpp
U lib/AsmParser/LLParser.cpp
U lib/AsmParser/LLLexer.cpp
U lib/AsmParser/LLToken.h
U lib/Bitcode/Reader/BitcodeReader.cpp
U lib/Bitcode/Writer/BitcodeWriter.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129259 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a "landing pad" attribute to the BasicBlock.
* Modify the bitcode reader and writer to handle said attribute.
Later: The verifier will ensure that the landing pad attribute is used in the
appropriate manner. I.e., not applied to the entry block, and applied only to
basic blocks that are branched to via a `dispatch' instruction.
(This is a work-in-progress.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129235 91177308-0d34-0410-b5e6-96231b3b80d8
(The Ada bindings probably need it too, but all the
obvious places to change say "do not edit this file".)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113618 91177308-0d34-0410-b5e6-96231b3b80d8
is different from what the code now uses in a two ways: NamedMDNodes
were considered Values and included in the numbering, and the
function-local metadata counter wasn't reset between functions.
The later problem breaks lazy deserialization, so instead of trying
to emulate the old numbering, just drop the old metadata. The only
in-tree use case is debug info with LTO, where the QOI loss is
considered acceptable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113557 91177308-0d34-0410-b5e6-96231b3b80d8
it to be the caller's responsibility to provide a stream in binary
mode. This fixes a layering violation and avoids an outs() call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104878 91177308-0d34-0410-b5e6-96231b3b80d8
having the bitcode writer materialize mdnodes for all the
debug location tuples when writing out the bc file and
stores the information in a more compact form. For example,
the -O0 -g bc file for combine.c in 176.gcc shrinks from
739392 to 512096 bytes.
This concludes my planned short-term debug info work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100261 91177308-0d34-0410-b5e6-96231b3b80d8
Modules and ModuleProviders. Because the "ModuleProvider" simply materializes
GlobalValues now, and doesn't provide modules, it's renamed to
"GVMaterializer". Code that used to need a ModuleProvider to materialize
Functions can now materialize the Functions directly. Functions no longer use a
magic linkage to record that they're materializable; they simply ask the
GVMaterializer.
Because the C ABI must never change, we can't remove LLVMModuleProviderRef or
the functions that refer to it. Instead, because Module now exposes the same
functionality ModuleProvider used to, we store a Module* in any
LLVMModuleProviderRef and translate in the wrapper methods. The bindings to
other languages still use the ModuleProvider concept. It would probably be
worth some time to update them to follow the C++ more closely, but I don't
intend to do it.
Fixes http://llvm.org/PR5737 and http://llvm.org/PR5735.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94686 91177308-0d34-0410-b5e6-96231b3b80d8
isPodLike type trait. This is a generally useful type trait for
more than just DenseMap, and we really care about whether something
acts like a pod, not whether it really is a pod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91421 91177308-0d34-0410-b5e6-96231b3b80d8
isRawBitcode and isBitcode to allow clients to test whether a given
memory buffer holds a bitcode image.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80804 91177308-0d34-0410-b5e6-96231b3b80d8
not 64, because we read at most 32 bits at a time. OTOH, "Result" must
be 64-bits and insertion into it must be 64-bit clean. Thanks to Ivan
Sorokin for bringing this up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74932 91177308-0d34-0410-b5e6-96231b3b80d8
of the bitcode reader and ASM parser APIs, as well as supporting it in all of the tools.
Patches for Clang and LLVM-GCC to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74614 91177308-0d34-0410-b5e6-96231b3b80d8
BLOCKNAME and SETRECORDNAME. This allows a bitcode
file to be self describing with pretty names for
records and blocks in addition to numbers. This
enhances llvm-bcanalyzer to use this to print prettily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70165 91177308-0d34-0410-b5e6-96231b3b80d8
state out of the BitstreamReader class into a BitstreamCursor class.
Doing this allows the client to have multiple cursors into the same
file, each with potentially different live block stacks and
abbreviation records.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70157 91177308-0d34-0410-b5e6-96231b3b80d8
elements in a form that is efficient for the reader to just get a
pointer in memory and start reading. APIs to do efficient reading
and writing are still todo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68465 91177308-0d34-0410-b5e6-96231b3b80d8
Constant, MDString and MDNode which can only be used by globals with a name
that starts with "llvm." or as arguments to a function with the same naming
restriction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68420 91177308-0d34-0410-b5e6-96231b3b80d8
is appropriate. This helps visually differentiate host-oriented
calculations from target-oriented calculations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@68227 91177308-0d34-0410-b5e6-96231b3b80d8
s/ParamAttr/Attribute/g
s/PAList/AttrList/g
s/FnAttributeWithIndex/AttributeWithIndex/g
s/FnAttr/Attribute/g
This sets the stage
- to implement function notes as function attributes and
- to distinguish between function attributes and return value attributes.
This requires corresponding changes in llvm-gcc and clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56622 91177308-0d34-0410-b5e6-96231b3b80d8
bitcode reader/writer as follows:
- add and use new bitcode FUNC_CODE_INST_VSELECT to handle the llvm
select opcode using either i1 or [N x i1] as the selector.
- retain old BITCODE FUNC_CODE_INST_SELECT in the bitcode reader to
handle select on i1 for backwards compatibility with existing bitcode
files.
- re-enable the vector-select.ll test program.
Also, rename the recently added bitcode opcode FUNC_CODE_INST_VCMP to
FUNC_CODE_INST_CMP2 and make the bitcode writer use it to handle
fcmp/icmp on scalars or vectors. In the bitcode writer, use
FUNC_CODE_INST_CMP for vfcmp/vicmp only. In the bitcode reader, have
FUNC_CODE_INST_CMP handle icmp/fcmp returning bool, for backwards
compatibility with existing bitcode files.
Patch by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56233 91177308-0d34-0410-b5e6-96231b3b80d8
and, if so, to return a vector of boolean as a result;
Extend the select LLVM IR instruction to allow you to specify a result
type which is a vector of boolean, in which case the result will be an
element-wise selection instead of choosing one vector or the other; and
Update LangRef.html to describe these changes.
This patch was contributed by Preston Gurd!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55969 91177308-0d34-0410-b5e6-96231b3b80d8
In particular, Collector was confusing to implementors. Several
thought that this compile-time class was the place to implement
their runtime GC heap. Of course, it doesn't even exist at runtime.
Specifically, the renames are:
Collector -> GCStrategy
CollectorMetadata -> GCFunctionInfo
CollectorModuleMetadata -> GCModuleInfo
CollectorRegistry -> GCRegistry
Function::getCollector -> getGC (setGC, hasGC, clearGC)
Several accessors and nested types have also been renamed to be
consistent. These changes should be obvious.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54899 91177308-0d34-0410-b5e6-96231b3b80d8
a new ilist_node class, and remove them. Unlike alist_node,
ilist_node doesn't attempt to manage storage itself, so it avoids
the associated problems, including being opaque in gdb.
Adjust the Recycler class so that it doesn't depend on alist_node.
Also, change it to use explicit Size and Align parameters, allowing
it to work when the largest-sized node doesn't have the greatest
alignment requirement.
Change MachineInstr's MachineMemOperand list from a pool-backed
alist to a std::list for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54146 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the GetResultInst instruction. It is still accepted in LLVM assembly
and bitcode, where it is now auto-upgraded to ExtractValueInst. Also, remove
support for return instructions with multiple values. These are auto-upgraded
to use InsertValueInst instructions.
The IRBuilder still accepts multiple-value returns, and auto-upgrades them
to InsertValueInst instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53941 91177308-0d34-0410-b5e6-96231b3b80d8
folded. Remove code that handled the case where they aren't
folded, and remove bitcode reader/writer support for them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53887 91177308-0d34-0410-b5e6-96231b3b80d8
bc files for modules with a target triple that indicates they are for
darwin. The reader unconditionally handles this, and the writer could
turn this on for more targets if we care.
This change has two benefits for darwin:
1) it allows us to encode the cpu type of the file in an easy to read
place that doesn't require decoding the bc file.
2) it works around a bug (IMO) in darwin's AR where it is incapable of
handling files that are not a multiple of 8 bytes long. BC files
are only guaranteed to be multiples of 4 bytes long.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53275 91177308-0d34-0410-b5e6-96231b3b80d8
and bitcode support for the extractvalue and insertvalue
instructions and constant expressions.
Note that this does not yet include CodeGen support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51468 91177308-0d34-0410-b5e6-96231b3b80d8
regions of memory that have a target specific relationship, as described in the
Embedded C Technical Report.
This also implements the 2007-12-11-AddressSpaces test,
which demonstrates how address space attributes can be used in LLVM IR.
In addition, this patch changes the bitcode signature for stores (in a backwards
compatible manner), such that the pointer type, rather than the pointee type, is
encoded. This permits type information in the pointer (e.g. address space) to be
preserved for stores.
LangRef updates are forthcoming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44858 91177308-0d34-0410-b5e6-96231b3b80d8
methods are new to Function:
bool hasCollector() const;
const std::string &getCollector() const;
void setCollector(const std::string &);
void clearCollector();
The assembly representation is as such:
define void @f() gc "shadow-stack" { ...
The implementation uses an on-the-side table to map Functions to
collector names, such that there is no overhead. A StringPool is
further used to unique collector names, which are extremely
likely to be unique per process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44769 91177308-0d34-0410-b5e6-96231b3b80d8
http://llvm.org/viewvc/llvm-project?rev=44199&view=rev
This patch completely broke serialization due to an invariant I assumed but
did not hold. The assumed invariant was that all pointer IDs emitted by a call
to BatchEmitOwnedPtrs would be consecutive. This is only the case if there has
been no forward references to an owned pointer (and hence already registered
with the Serializer object).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44203 91177308-0d34-0410-b5e6-96231b3b80d8
Deserialize::ReadDiffPtrID to read and emit bools instead of unsigned
integers. This should result in a nice space optimization once we have
"auto-abbreviation" generation in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44200 91177308-0d34-0410-b5e6-96231b3b80d8
SerializedPtrID, followed by the *differences* in IDs. The big idea is that
most IDs will be just be 1 off from the previous (either that or NULL, which
we encode as a difference if 0), so this will greatly reduce the encoding
space for extra IDs to just 1 bit per pointer.
So far this optimization reduces serialization of Carbon.h by only 1%, but
we aren't using any abbreviations now in the Bitcode file to properly take
advantage of this optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44199 91177308-0d34-0410-b5e6-96231b3b80d8
deserialize objects if BatchReadOwnedPtrs was called more than once in the
same call chain then the second call would overwrite the SerializedPtrIDs
being used by the first call. Solved this problem by making the vector that
holds the pointer IDs local to a function call. Now BatchReadOwnedPtrs is
reentrant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44152 91177308-0d34-0410-b5e6-96231b3b80d8
clients of the Deserializer to read the pointer ID before they are ready
to deserialize the object (which can mean registering a pointer reference
with the backpatcher).
Changed some methods that took an argument "SerializedPtrID" to "const SerializedPtrID&" (pass-by-reference). This is to accommodate a future
revision of SerializedPtrID where it may be much fatter than an unsigned
integer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44021 91177308-0d34-0410-b5e6-96231b3b80d8
deserialization as a temporary location for storing serialized pointer identifiers. The
definition of SerializedPtrID will likely change significantly in the future, and the
current implementation caused compilation errors on some 64-bit machines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43983 91177308-0d34-0410-b5e6-96231b3b80d8
serialized block in the bitstream, including a block in an entirely different
nesting than the current block. This is useful for deserializing objects from
a bitstream in an order different from the order that they were serialized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43973 91177308-0d34-0410-b5e6-96231b3b80d8
Moved some of the logic in BitstreamReader::ExitBlock into a utility function
BitstreamReader::PopBlockScope. The latter is a private method. It will also
be called by Deserializer to manipulate the current "block scope."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43972 91177308-0d34-0410-b5e6-96231b3b80d8
block that is being visited in the bitstream. The client can also now
skip blocks before reading them, and query the current abbreviation number
as seen from the perspective of the Deserializer. This allows the client
to be more interactive in the deserialization process (if they so choose).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43916 91177308-0d34-0410-b5e6-96231b3b80d8
instead of just using "unsigned". This gives us more flexibility in changing
the definition of the handle later, and is more self-documenting.
Added tracking of block stack in the Deserializer. Now clients can query
if they are still within a block using the methods GetCurrentBlockLocation()
and FinishedBlock().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43903 91177308-0d34-0410-b5e6-96231b3b80d8
array of pointers to not allocate a second array to contain the pointer ids.
Fixed bug in the same member function where deserialized pointers were
not being registered with the backpatcher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43855 91177308-0d34-0410-b5e6-96231b3b80d8
to group the pointer IDs together in the bitstream before their referenced
contents (which will lend itself to more efficient encoding).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43845 91177308-0d34-0410-b5e6-96231b3b80d8
by value. This version prohibits backpatching of pointers, so it
useful when a pointee is always known to be deserialized beforehand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43799 91177308-0d34-0410-b5e6-96231b3b80d8
