Simplify code by simplifying terminators that branch to blocks that start
with an unreachable instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17116 91177308-0d34-0410-b5e6-96231b3b80d8
particular, invoke ret values are only live in the normal dest of the invoke
not in the unwind dest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17108 91177308-0d34-0410-b5e6-96231b3b80d8
If a function had no return instruction in it, and the result of the inlined
call instruction was used, we would crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17104 91177308-0d34-0410-b5e6-96231b3b80d8
unneccesary. This allows us to delete several hundred phi nodes of the
form PHI(x,x,x,undef) from 253.perlbmk and probably other programs as well.
This implements Mem2Reg/UndefValuesMerge.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17098 91177308-0d34-0410-b5e6-96231b3b80d8
nodes unless we KNOW that we are able to promote all of them.
This fixes: test/Regression/Transforms/SimplifyCFG/PhiNoEliminate.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16973 91177308-0d34-0410-b5e6-96231b3b80d8
whose addresses where used by trivial phi nodes and select instructions. This
is now performed by the instcombine pass, which is more powerful, is much
simpler, and is faster. This allows the deletion of a bunch of code, two
FIXME's and two gotos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16406 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
block (common in a switch), make sure to remove extra edges in successor
blocks. This fixes CodeExtractor/2004-08-12-BlockExtractPHI.ll and should
be pulled into LLVM 1.3 (though the regression test need not be, as that
would require pulling in the LoopExtract.cpp changes).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15717 91177308-0d34-0410-b5e6-96231b3b80d8
This version takes about 1s longer than the previous one (down to 2.35s),
but on the positive side, it actually works :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14856 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates an N*N*logN algorithm from the loop simplify pass, replacing
it with a much simpler and faster alternative. In a debug build, this reduces
gccas time on eon from 85s to 42s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14851 91177308-0d34-0410-b5e6-96231b3b80d8
since May 1st. In this code, the pred iterator was being invalidated sometimes
causing the wrong entries to be added to PHI nodes.
The fix for this is to defererence and safe the *PI value before we hack on
branch instructions, which changes use/def chains, which SOMETIMES invalidates
the iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14278 91177308-0d34-0410-b5e6-96231b3b80d8
Fix another non-deterministic behavior, this one should actually speed up the
code though as it was doing silly things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14258 91177308-0d34-0410-b5e6-96231b3b80d8
non-deterministic things like the ordering of blocks in the dominance
frontier of a BB. Unfortunately, I don't know of a better way to solve
this problem than to explicitly sort the BB's in function-order before
processing them. This is guaranteed to slow the pass down a bit, but
is absolutely necessary to get usable diffs between two different tools
executing the mem2reg or scalarrepl pass.
Before this, bazillions of spurious diff failures occurred all over the
place due to the different order of processing PHIs:
- %tmp.111 = getelementptr %struct.Connector_struct* %upcon.0.0, uint 0, uint 0
+ %tmp.111 = getelementptr %struct.Connector_struct* %upcon.0.1, uint 0, uint 0
Now, the diffs match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14244 91177308-0d34-0410-b5e6-96231b3b80d8
nondeterministic results that depend on where these objects land in memory.
Instead, sort by the value of the constant, which is stable.
Before this patch, the -simplifycfg pass run from two different compilers
could cause different code to be generated, though it was semantically the
same:
@@ -12258,8 +12258,8 @@
%s_addr.1 = phi sbyte* [ %s, %entry ], [ %inc.0, %no_exit ] ; <sbyte*> [#uses=5]
%tmp.1 = load sbyte* %s_addr.1 ; <sbyte> [#uses=1]
switch sbyte %tmp.1, label %no_exit [
- sbyte 0, label %loopexit
sbyte 46, label %loopexit
+ sbyte 0, label %loopexit
]
We need to stomp all of this stuff out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14243 91177308-0d34-0410-b5e6-96231b3b80d8
is write an autoconf macro that checks whether __isnan or isnan actually works
**using the C++ compiler after #include <cmath>**, instead of doing it the easy
way with AC_CHECK_FUNCS().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14171 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for acos/asin/atan. 188.ammp contains three calls to acos with
constant arguments. Constant folding it allows elimination of those 3 calls
and three FP divisions of the results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13821 91177308-0d34-0410-b5e6-96231b3b80d8
CloneTrace, and because it is primarily an operation on ValueMaps. It
is now a global (non-static) function which can be pulled in using
ValueMapper.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13600 91177308-0d34-0410-b5e6-96231b3b80d8
PHI node entries from multiple outside-the-region blocks. This also fixes
extraction of the entry block in a function. Yaay.
This has successfully block extracted all (but one) block from the score_move
function in obsequi (out of 33). Hrm, I wonder which block the bug is in. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13489 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a stub for the severSplitPHINodes which will allow us to bbextract
bb's with PHI nodes in them soon.
* Remove unused arguments from findInputsOutputs
* Dramatically simplify the code in findInputsOutputs. In particular,
nothing really cares whether or not a PHI node is using something.
* Move moveCodeToFunction to after emitCallAndSwitchStatement as that's the
order they get called.
* Fix a bug where we would code extract a region that included a call to
vastart. Like 'alloca', calls to vastart must stay in the function that
they are defined in.
* Add some comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13482 91177308-0d34-0410-b5e6-96231b3b80d8
from the extracted region. If the return has 0 or 1 exit blocks, the new
function returns void. If it has 2 exits, it returns bool, otherwise it
returns a ushort as before.
This allows us to use a conditional branch instruction when there are two
exit blocks, as often happens during block extraction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13481 91177308-0d34-0410-b5e6-96231b3b80d8
1. Get rid of the silly abort block. When doing bb extraction, we get one
abort block for every block extracted, which is kinda annoying.
2. If the switch ends up having a single destination, turn it into an
unconditional branch.
I would like to add support for conditional branches, but to do this we will
want to have the function return a bool instead of a ushort.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13478 91177308-0d34-0410-b5e6-96231b3b80d8
structure to being dynamically computed on demand. This makes updating
loop information MUCH easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13045 91177308-0d34-0410-b5e6-96231b3b80d8
Basically we were using SimplifyCFG as a huge sledgehammer for a simple
optimization. Because simplifycfg does so many things, we can't use it
for this purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12977 91177308-0d34-0410-b5e6-96231b3b80d8
With this fix we now successfully extract all 149 loops from 256.bzip2 without
crashing or miscompiling the program!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12493 91177308-0d34-0410-b5e6-96231b3b80d8
1. Names were not put on the new arguments created (ok, this just helps sanity :)
2. Fix outgoing pointer values
3. Do not insert stores for values that had not been computed
4. Fix some wierd problems with the outset calculation
This fixes CodeExtractor/2004-03-14-DominanceProblem.ll, making the extractor
work on at least one simple case!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12484 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify the input/output finder. All elements of a basic block are
instructions. Any used arguments are also inputs. An instruction can only
be used by another instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12405 91177308-0d34-0410-b5e6-96231b3b80d8
* Don't insert a branch to the switch instruction after the call, just
make it a single block.
* Insert the new alloca instructions in the entry block of the original
function instead of having them execute dynamically
* Don't make the default edge of the switch instruction go back to the switch.
The loop extractor shouldn't create new loops!
* Give meaningful names to the alloca slots and the reload instructions
* Some minor code simplifications
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12402 91177308-0d34-0410-b5e6-96231b3b80d8
This also implements a two minor improvements:
* Don't insert live-out stores IN the region, insert them on the code path
that exits the region
* If the region is exited to the same block from multiple paths, share the
switch statement entry, live-out store code, and the basic block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12401 91177308-0d34-0410-b5e6-96231b3b80d8
a member of the class. While we're at it, turn the collection into a set
instead of a vector to improve efficiency and make queries simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12400 91177308-0d34-0410-b5e6-96231b3b80d8
loop information won't see it, and we could have unreachable blocks pointing to
the non-header node of blocks in a natural loop. This isn't tidy, so have the
loopsimplify pass clean it up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12380 91177308-0d34-0410-b5e6-96231b3b80d8
On the testcase from GCC PR12440, which has a LOT of loops (1392 of which require
preheaders to be inserted), this speeds up the loopsimplify pass from 1.931s to
0.1875s. The loop in question goes from 1.65s -> 0.0097s, which isn't bad. All of
these times are a debug build.
This adds a dependency on DominatorTree analysis that was not there before, but
we always had dominatortree available anyway, because LICM requires both loop
simplify and DT, so this doesn't add any extra analysis in practice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12362 91177308-0d34-0410-b5e6-96231b3b80d8
function, as long as the loop isn't the only one in that function. This should
help debugging passes easier with BugPoint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11936 91177308-0d34-0410-b5e6-96231b3b80d8
This case occurs many times in various benchmarks, especially when combined
with the previous patch. This allows it to get stuff like:
if (X == 4 || X == 3)
if (X == 5 || X == 8)
and
switch (X) {
case 4: case 5: case 6:
if (X == 4 || X == 5)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11797 91177308-0d34-0410-b5e6-96231b3b80d8
allowed in invoke instructions. Thus, if we are inlining a call to an intrinsic
function into an invoke site, we don't need to turn the call into an invoke!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11384 91177308-0d34-0410-b5e6-96231b3b80d8
Having a proper 'select' instruction would allow the elimination of a lot
of the special case cruft in this patch, but we don't have one yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11307 91177308-0d34-0410-b5e6-96231b3b80d8
This causes the JIT, or LLC'd program to print out a nice message, explaining
WHY the program aborted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11184 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is that the dominator update code didn't "realize" that it's
possible for the newly inserted basic block to dominate anything. Because
it IS possible, stuff was getting updated wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11137 91177308-0d34-0410-b5e6-96231b3b80d8
1. Don't scan to the end of alloca instructions in the caller function to
insert inlined allocas, just insert at the top. This saves a lot of
time inlining into functions with a lot of allocas.
2. Use splice to move the alloca instructions over, instead of remove/insert.
This allows us to transfer a block at a time, and eliminates a bunch of
silly symbol table manipulations.
This speeds up the inliner on the testcase in PR209 from 1.73s -> 1.04s (67%)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11118 91177308-0d34-0410-b5e6-96231b3b80d8
and that basic block ends with a return instruction. In this case, we can just splice
the cloned "body" of the function directly into the source basic block, avoiding a lot
of rearrangement and splitBasicBlock's linear scan over the split block. This speeds up
the inliner on the testcase in PR209 from 2.3s to 1.7s, a 35% reduction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11116 91177308-0d34-0410-b5e6-96231b3b80d8
before we delete the original call site, allowing slight simplifications of
code, but nothing exciting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11109 91177308-0d34-0410-b5e6-96231b3b80d8
process. The only optimization we did so far is to avoid creating a
PHI node, then immediately destroying it in the common case where the
callee has one return statement. Instead, we just don't create the return
value. This has no noticable performance impact, but paves the way for
future improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11108 91177308-0d34-0410-b5e6-96231b3b80d8
to add the cloned block to. This allows the block to be added to the function
immediately, and all of the instructions to be immediately added to the function
symbol table, which speeds up the inliner from 3.7 -> 3.38s on the PR209.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11107 91177308-0d34-0410-b5e6-96231b3b80d8
process them all as a group. This speeds up SRoA/mem2reg from 28.46s to
0.62s on the testcase from PR209.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11100 91177308-0d34-0410-b5e6-96231b3b80d8
Added assert() to ensure symbol table is well formed.
Added code to remember the value that was found; resolving types can change
the symbol table and invalidate the value of the iterator.
Added comments to the ResolveTypes() function (mainly for my own benefit).
Please feel free to correct the comments if they are not accurate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9693 91177308-0d34-0410-b5e6-96231b3b80d8
PHI node entries for unwind instructions just like for call instructions which
became invokes! This fixes PR57, tested by
Inline/2003-10-26-InlineInvokeExceptionDestPhi.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9526 91177308-0d34-0410-b5e6-96231b3b80d8