Owning the buffer is somewhat inflexible. Some Binaries have sub Binaries
(like Archive) and we had to create dummy buffers just to handle that. It is
also a bad fit for IRObjectFile where the Module wants to own the buffer too.
Keeping this ownership would make supporting IR inside native objects
particularly painful.
This patch focuses in lib/Object. If something elsewhere used to own an Binary,
now it also owns a MemoryBuffer.
This patch introduces a few new types.
* MemoryBufferRef. This is just a pair of StringRefs for the data and name.
This is to MemoryBuffer as StringRef is to std::string.
* OwningBinary. A combination of Binary and a MemoryBuffer. This is needed
for convenience functions that take a filename and return both the
buffer and the Binary using that buffer.
The C api now uses OwningBinary to avoid any change in semantics. I will start
a new thread to see if we want to change it and how.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216002 91177308-0d34-0410-b5e6-96231b3b80d8
We already handle the no-slabs case when checking whether the current slab
is large enough: if no slabs have been allocated, CurPtr and End are both 0.
alignPtr(0), will still be 0, and so "if (Ptr + Size <= End)" fails.
Differential Revision: http://reviews.llvm.org/D4943
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215841 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r215784 / 3f8a26f6fe.
LLD has 3 StringSaver's, one of which takes a lock when saving the
string... Need to investigate more closely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215790 91177308-0d34-0410-b5e6-96231b3b80d8
This class is generally useful.
In breaking it out, the primary change is that it has been made
non-virtual. It seems like being abstract led to there being 3 different
(2 in llvm + 1 in clang) concrete implementations which disagreed about
the ownership of the saved strings (see the manual call to free() in the
unittest StrDupSaver; yes this is different from the CommandLine.cpp
StrDupSaver which owns the stored strings; which is different from
Clang's StringSetSaver which just holds a reference to a
std::set<std::string> which owns the strings).
I've identified 2 other places in the
codebase that are open-coding this pattern:
memcpy(Alloc.Allocate<char>(strlen(S)+1), S, strlen(S)+1)
I'll be switching them over. They are
* llvm::sys::Process::GetArgumentVector
* The StringAllocator member of YAMLIO's Input class
This also will allow simplifying Clang's driver.cpp quite a bit.
Let me know if there are any other places that could benefit from
StringSaver. I'm also thinking of adding a saveStringRef member for
getting a stable StringRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215784 91177308-0d34-0410-b5e6-96231b3b80d8
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215558 91177308-0d34-0410-b5e6-96231b3b80d8
LLD needs them, and it's good to be able to print them properly when
our object dumpers encounter them.
Patch by Daniel Stewart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215352 91177308-0d34-0410-b5e6-96231b3b80d8
it breaks the modules builds (where CallGraph.h can be quite reasonably
transitively included by an unimported portion of a module, and CallGraph.cpp
not linked in), and appears to have been entirely redundant since PR780 was
fixed back in 2008.
If this breaks anything, please revert; I have only tested this with a single
configuration, and it's possible that this is still somehow fixing something
(though I doubt it, since no other similar file uses this mechanism any more).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215142 91177308-0d34-0410-b5e6-96231b3b80d8
path::const_iterator claims that it's a bidirectional iterator, but it
doesn't satisfy all of the contracts for a bidirectional iterator.
For example, n3376 24.2.5 p6 says "If a and b are both dereferenceable,
then a == b if and only if *a and *b are bound to the same object",
but this doesn't work with how we stash and recreate Components.
This means that our use of reverse_iterator on this type is invalid
and leads to many of the valgrind errors we're hitting, as explained
by Tilmann Scheller here:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140728/228654.html
Instead, we admit that path::const_iterator is only an input_iterator,
and implement a second input_iterator for path::reverse_iterator (by
changing const_iterator::operator-- to reverse_iterator::operator++).
All of the uses of this just traverse once over the path in one
direction or the other anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214737 91177308-0d34-0410-b5e6-96231b3b80d8
A second binutils feature needed to support ELFv2 is the .localentry
directive. In the ELFv2 ABI, functions may have two entry points:
one for calling the routine locally via "bl", and one for calling the
function via function pointer (either at the source level, or implicitly
via a PLT stub for global calls). The two entry points share a single
ELF symbol, where the ELF symbol address identifies the global entry
point address, while the local entry point is found by adding a delta
offset to the symbol address. That offset is encoded into three
platform-specific bits of the ELF symbol st_other field.
The .localentry directive instructs the assembler to set those fields
to encode a particular offset. This is typically used by a function
prologue sequence like this:
func:
addis r2, r12, (.TOC.-func)@ha
addi r2, r2, (.TOC.-func)@l
.localentry func, .-func
Note that according to the ABI, when calling the global entry point,
r12 must be set to point the global entry point address itself; while
when calling the local entry point, r2 must be set to point to the TOC
base. The two instructions between the global and local entry point in
the above example translate the first requirement into the second.
This patch implements support in the PowerPC MC streamers to emit the
.localentry directive (both into assembler and ELF object output), as
well as support in the assembler parser to parse that directive.
In addition, there is another change required in MC fixup/relocation
handling to properly deal with relocations targeting function symbols
with two entry points: When the target function is known local, the MC
layer would immediately handle the fixup by inserting the target
address -- this is wrong, since the call may need to go to the local
entry point instead. The GNU assembler handles this case by *not*
directly resolving fixups targeting functions with two entry points,
but always emits the relocation and relies on the linker to handle
this case correctly. This patch changes LLVM MC to do the same (this
is done via the processFixupValue routine).
Similarly, there are cases where the assembler would normally emit a
relocation, but "simplify" it to a relocation targeting a *section*
instead of the actual symbol. For the same reason as above, this
may be wrong when the target symbol has two entry points. The GNU
assembler again handles this case by not performing this simplification
in that case, but leaving the relocation targeting the full symbol,
which is then resolved by the linker. This patch changes LLVM MC
to do the same (via the needsRelocateWithSymbol routine).
NOTE: The method used in this patch is overly pessimistic, since the
needsRelocateWithSymbol routine currently does not have access to the
actual target symbol, and thus must always assume that it might have
two entry points. This will be improved upon by a follow-on patch
that modifies common code to pass the target symbol when calling
needsRelocateWithSymbol.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213485 91177308-0d34-0410-b5e6-96231b3b80d8
ELFv2 binaries are marked by a bit in the ELF header e_flags field.
A new assembler directive .abiversion can be used to set that flag.
This patch implements support in the PowerPC MC streamers to emit the
.abiversion directive (both into assembler and ELF binary output),
as well as support in the assembler parser to parse the .abiversion
directive.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213484 91177308-0d34-0410-b5e6-96231b3b80d8
This adds initial support for PPC32 ELF PIC (Position Independent Code; the
-fPIC variety), thus rectifying a long-standing deficiency in the PowerPC
backend.
Patch by Justin Hibbits!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213427 91177308-0d34-0410-b5e6-96231b3b80d8
This optional dependency on the udis86 library was added some time back to aid
JIT development, but doesn't make much sense to link into LLVM binaries these
days.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213300 91177308-0d34-0410-b5e6-96231b3b80d8
Until now, attempting to create an alias of a required option would
complain if the user supplied the alias, because the required option
didn't have a value. Similarly, if you said the alias was required,
then using the base option would complain that the alias wasn't
supplied. Lastly, if you put required on both, *neither* option would
work.
By changning alias to overload addOccurrence and setting cl::Required
on the original option, we can get this to behave in a more useful
way. I've also added a test and updated a user that was getting this
wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212986 91177308-0d34-0410-b5e6-96231b3b80d8
Turn llvm::SpecialCaseList into a simple class that parses text files in
a specified format and knows nothing about LLVM IR. Move this class into
LLVMSupport library. Implement two users of this class:
* DFSanABIList in DFSan instrumentation pass.
* SanitizerBlacklist in Clang CodeGen library.
The latter will be modified to use actual source-level information from frontend
(source file names) instead of unstable LLVM IR things (LLVM Module identifier).
Remove dependency edge from ClangCodeGen/ClangDriver to LLVMTransformUtils.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212643 91177308-0d34-0410-b5e6-96231b3b80d8
Use 0 for the invalid buffer instead of -1/~0 and switch to unsigned
representation to enable more idiomatic usage.
Also introduce a trivial SourceMgr::getMainFileID() instead of hard-coding 0/1
to identify the main file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212398 91177308-0d34-0410-b5e6-96231b3b80d8
Some versions of Android don't have futimes/futimens and this code wasn't
updated during the recent errc refactoring.
Patch by Luqman Aden!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212055 91177308-0d34-0410-b5e6-96231b3b80d8
universal file. This also includes support for -arch all, selecting the host
architecture by default from a universal file and checking if -arch is used
with a standard Mach-O it matches that architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212054 91177308-0d34-0410-b5e6-96231b3b80d8
I'll fix the problems in libclang and other projects in ways that don't
require <mutex> until we sort out the cygwin situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211900 91177308-0d34-0410-b5e6-96231b3b80d8
Add the new AppContainer characteristic which is import for Windows Store
(Metro) compatible applications. Add the new Control Flow Guard flag to bring
the enumeration up to date with the current values as of Windows 8.1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211855 91177308-0d34-0410-b5e6-96231b3b80d8
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211749 91177308-0d34-0410-b5e6-96231b3b80d8
set on the calling thread.
This allows libclang's indexing threads to propagate their priority to the clang module building threads.
rdar://17459872
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211747 91177308-0d34-0410-b5e6-96231b3b80d8
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
URL: http://reviews.llvm.org/D3390
Author: yln
I'm landing this for the second time, it broke Windows bots the first time around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211705 91177308-0d34-0410-b5e6-96231b3b80d8
