LLD needs them, and it's good to be able to print them properly when
our object dumpers encounter them.
Patch by Daniel Stewart.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215352 91177308-0d34-0410-b5e6-96231b3b80d8
A second binutils feature needed to support ELFv2 is the .localentry
directive. In the ELFv2 ABI, functions may have two entry points:
one for calling the routine locally via "bl", and one for calling the
function via function pointer (either at the source level, or implicitly
via a PLT stub for global calls). The two entry points share a single
ELF symbol, where the ELF symbol address identifies the global entry
point address, while the local entry point is found by adding a delta
offset to the symbol address. That offset is encoded into three
platform-specific bits of the ELF symbol st_other field.
The .localentry directive instructs the assembler to set those fields
to encode a particular offset. This is typically used by a function
prologue sequence like this:
func:
addis r2, r12, (.TOC.-func)@ha
addi r2, r2, (.TOC.-func)@l
.localentry func, .-func
Note that according to the ABI, when calling the global entry point,
r12 must be set to point the global entry point address itself; while
when calling the local entry point, r2 must be set to point to the TOC
base. The two instructions between the global and local entry point in
the above example translate the first requirement into the second.
This patch implements support in the PowerPC MC streamers to emit the
.localentry directive (both into assembler and ELF object output), as
well as support in the assembler parser to parse that directive.
In addition, there is another change required in MC fixup/relocation
handling to properly deal with relocations targeting function symbols
with two entry points: When the target function is known local, the MC
layer would immediately handle the fixup by inserting the target
address -- this is wrong, since the call may need to go to the local
entry point instead. The GNU assembler handles this case by *not*
directly resolving fixups targeting functions with two entry points,
but always emits the relocation and relies on the linker to handle
this case correctly. This patch changes LLVM MC to do the same (this
is done via the processFixupValue routine).
Similarly, there are cases where the assembler would normally emit a
relocation, but "simplify" it to a relocation targeting a *section*
instead of the actual symbol. For the same reason as above, this
may be wrong when the target symbol has two entry points. The GNU
assembler again handles this case by not performing this simplification
in that case, but leaving the relocation targeting the full symbol,
which is then resolved by the linker. This patch changes LLVM MC
to do the same (via the needsRelocateWithSymbol routine).
NOTE: The method used in this patch is overly pessimistic, since the
needsRelocateWithSymbol routine currently does not have access to the
actual target symbol, and thus must always assume that it might have
two entry points. This will be improved upon by a follow-on patch
that modifies common code to pass the target symbol when calling
needsRelocateWithSymbol.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213485 91177308-0d34-0410-b5e6-96231b3b80d8
ELFv2 binaries are marked by a bit in the ELF header e_flags field.
A new assembler directive .abiversion can be used to set that flag.
This patch implements support in the PowerPC MC streamers to emit the
.abiversion directive (both into assembler and ELF binary output),
as well as support in the assembler parser to parse the .abiversion
directive.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213484 91177308-0d34-0410-b5e6-96231b3b80d8
This adds initial support for PPC32 ELF PIC (Position Independent Code; the
-fPIC variety), thus rectifying a long-standing deficiency in the PowerPC
backend.
Patch by Justin Hibbits!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213427 91177308-0d34-0410-b5e6-96231b3b80d8
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike my previous commit, don't try to remove the corresponding VK_Mips_GOT yet
even though it shares the same assembly text since that is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205196 91177308-0d34-0410-b5e6-96231b3b80d8
These were:
* noreorder handling on the target object streamer and asm parser.
* setting the initial flag bits based on the enabled features.
* setting the elf header flag for micromips
It is *really* depressing I am the one doing this instead of someone at
mips actually taking the time to understand the infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200138 91177308-0d34-0410-b5e6-96231b3b80d8
The underlying type of all plain enums in MSVC is 'int', even if the
enumerator contains large 32-bit unsigned values or values greater than
UINT_MAX. The only way to get a large or unsigned enum type is to
request it explicitly with the C++11 strong enum types feature.
However, since LLVM isn't C++11 yet, I had to add a conditional
LLVM_ENUM_INT_TYPE to Compiler.h to control its usage.
The motivating true positive for this change is compiling PointerIntPair
with MSVC for win64. The PointerIntMask value is supposed to be pointer
sized value of all ones with some low zeros. Instead, it's truncated to
32-bits! We are only saved later because it is sign extended back in
the AND with int64_t, and we happen to want all ones.
This silences lots of -Wmicrosoft warnings during a clang self-host
targeting Windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191241 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to ARM change r182800, dynamic linker will read bits/addends from
the original object rather than from the object that might have been patched
previously. For the purpose of relocations for MCJIT stubs on MIPS, we
internally use otherwise unused MIPS relocations.
The change also enables MCJIT unit tests for MIPS (EL/BE), and the following
two tests now pass:
- MCJITTest.return_global and
- MCJITTest.multiple_functions.
These issues have been tracked as Bug 16250.
Patch by Petar Jovanovic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187019 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for TLS data relocations and modifiers:
.quad target@dtpmod
.quad target@tprel
.quad target@dtprel
Currently exploited by the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185394 91177308-0d34-0410-b5e6-96231b3b80d8
Add VK_... values and relocation types necessary to support
the @got family of modifiers. Used by the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184860 91177308-0d34-0410-b5e6-96231b3b80d8
The GNU assembler supports (as extension to the ABI) use of PC-relative
relocations in half16 fields, which allows writing code like:
li 1, base-.
This patch adds support for those relocation types in the assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184552 91177308-0d34-0410-b5e6-96231b3b80d8
The current code base only supports the minimum set of tls-related
relocations and @modifiers that are necessary to support compiler-
generated code. This patch extends this to the full set defined
in the ABI (and supported by the GNU assembler) for the benefit
of the assembler parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184551 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the @higher, @highera, @highest, and @highesta
modifers, including some missing relocation types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184550 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the relocation type and other necessary infrastructure
to use the @toc@h modifier in the assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184549 91177308-0d34-0410-b5e6-96231b3b80d8
All R_PPC_... relocs should also be present (using the same number)
under the corresponding R_PPC64_... name. The latter were missing
for a couple of cases, which this patch adds.
This is not a big problem when emitting the reloc, because we can
just use the R_PPC_... define instead. But it is a problem when
*dumping* relocations e.g. using llvm-readobj, because this will
expect only R_PPC64_... values when inspecting a ppc64 ELF file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181451 91177308-0d34-0410-b5e6-96231b3b80d8
Another step towards reinstating the SystemZ backend. Tests will be
included in the main backend patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181008 91177308-0d34-0410-b5e6-96231b3b80d8
MCTargetDesc/PPCMCCodeEmitter.cpp current has code like:
if (isSVR4ABI() && is64BitMode())
Fixups.push_back(MCFixup::Create(0, MO.getExpr(),
(MCFixupKind)PPC::fixup_ppc_toc16));
else
Fixups.push_back(MCFixup::Create(0, MO.getExpr(),
(MCFixupKind)PPC::fixup_ppc_lo16));
This is a problem for the asm parser, since it requires knowledge of
the ABI / 64-bit mode to be set up. However, more fundamentally,
at this point we shouldn't make such distinctions anyway; in an assembler
file, it always ought to be possible to e.g. generate TOC relocations even
when the main ABI is one that doesn't use TOC.
Fortunately, this is actually completely unnecessary; that code was added
to decide whether to generate TOC relocations, but that information is in
fact already encoded in the VariantKind of the underlying symbol.
This commit therefore merges those fixup types into one, and then decides
which relocation to use based on the VariantKind.
No changes in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178007 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (o32 abi) specific e_header setting.
EF_MIPS_ABI_O32 needs to be set in the
ELF header flags for o32 abi output.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175569 91177308-0d34-0410-b5e6-96231b3b80d8
excluding visibility bits.
Mips (Mips16) specific e_header setting.
EF_MIPS_ARCH_ASE_M16 needs to be set in the
ELF header flags for Mips16.
Contributer: Reed Kotler
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175566 91177308-0d34-0410-b5e6-96231b3b80d8
