an assert on Darwin llvm-gcc builds.
Assertion failed: (castIsValid(op, S, Ty) && "Invalid cast!"), function Create, file /Users/buildslave/zorg/buildbot/smooshlab/slave-0.8/build.llvm-gcc-i386-darwin9-RA/llvm.src/lib/VMCore/Instructions.cpp, li\
ne 2067.
etc.
http://smooshlab.apple.com:8013/builders/llvm-gcc-i386-darwin9-RA/builds/2354
--- Reverse-merging r134893 into '.':
U include/llvm/Target/TargetData.h
U include/llvm/DerivedTypes.h
U tools/bugpoint/ExtractFunction.cpp
U unittests/Support/TypeBuilderTest.cpp
U lib/Target/ARM/ARMGlobalMerge.cpp
U lib/Target/TargetData.cpp
U lib/VMCore/Constants.cpp
U lib/VMCore/Type.cpp
U lib/VMCore/Core.cpp
U lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Instrumentation/ProfilingUtils.cpp
U lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/CodeGen/SjLjEHPrepare.cpp
--- Reverse-merging r134888 into '.':
G include/llvm/DerivedTypes.h
U include/llvm/Support/TypeBuilder.h
U include/llvm/Intrinsics.h
U unittests/Analysis/ScalarEvolutionTest.cpp
U unittests/ExecutionEngine/JIT/JITTest.cpp
U unittests/ExecutionEngine/JIT/JITMemoryManagerTest.cpp
U unittests/VMCore/PassManagerTest.cpp
G unittests/Support/TypeBuilderTest.cpp
U lib/Target/MBlaze/MBlazeIntrinsicInfo.cpp
U lib/Target/Blackfin/BlackfinIntrinsicInfo.cpp
U lib/VMCore/IRBuilder.cpp
G lib/VMCore/Type.cpp
U lib/VMCore/Function.cpp
G lib/VMCore/Core.cpp
U lib/VMCore/Module.cpp
U lib/AsmParser/LLParser.cpp
U lib/Transforms/Utils/CloneFunction.cpp
G lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Utils/InlineFunction.cpp
U lib/Transforms/Instrumentation/GCOVProfiling.cpp
U lib/Transforms/Scalar/ObjCARC.cpp
U lib/Transforms/Scalar/SimplifyLibCalls.cpp
U lib/Transforms/Scalar/MemCpyOptimizer.cpp
G lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/Transforms/IPO/ArgumentPromotion.cpp
U lib/Transforms/InstCombine/InstCombineCompares.cpp
U lib/Transforms/InstCombine/InstCombineAndOrXor.cpp
U lib/Transforms/InstCombine/InstCombineCalls.cpp
U lib/CodeGen/DwarfEHPrepare.cpp
U lib/CodeGen/IntrinsicLowering.cpp
U lib/Bitcode/Reader/BitcodeReader.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134949 91177308-0d34-0410-b5e6-96231b3b80d8
turns out that it could cause an infinite loop in some situations. If this code
is triggered and it converts a cleanup into a catchall, but that cleanup was in
already in a cleanup, then the _Unwind_SjLj_Resume could infinite loop. I.e.,
the code doesn't consume the exception object and passes it on to
_Unwind_SjLj_Resume. But _USjLjR expects it to be consumed (since it's landing
at a catchall instead of a cleanup). So it uses the values that are presently
there, which are the values that tell it to jump to the fake landing pad.
<rdar://problem/9508402>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132381 91177308-0d34-0410-b5e6-96231b3b80d8
transformed by the inliner into a branch to the enclosing landing pad
(when inlined through an invoke). If not so optimized, it is lowered
DWARF EH preparation into a call to _Unwind_Resume (or _Unwind_SjLj_Resume
as appropriate). Its chief advantage is that it takes both the
exception value and the selector value as arguments, meaning that there
is zero effort in recovering these; however, the frontend is required
to pass these down, which is not actually particularly difficult.
Also document the behavior of landing pads a bit better, and make it
clearer that it's okay that personality functions don't always land at
landing pads. This is just a fact of life. Don't write optimizations that
rely on pushing things over an unwind edge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132253 91177308-0d34-0410-b5e6-96231b3b80d8
and then go kablooie. The problem was that it was tracking the PHI nodes anew
each time into this function. But it didn't need to. And because the recursion
didn't know that a PHINode was visited before, it would go ahead and call
itself.
There is a testcase, but unfortunately it's too big to add. This problem will go
away with the EH rewrite.
<rdar://problem/8856298>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127640 91177308-0d34-0410-b5e6-96231b3b80d8
must be called in the pass's constructor. This function uses static dependency declarations to recursively initialize
the pass's dependencies.
Clients that only create passes through the createFooPass() APIs will require no changes. Clients that want to use the
CommandLine options for passes will need to manually call the appropriate initialization functions in PassInitialization.h
before parsing commandline arguments.
I have tested this with all standard configurations of clang and llvm-gcc on Darwin. It is possible that there are problems
with the static dependencies that will only be visible with non-standard options. If you encounter any crash in pass
registration/creation, please send the testcase to me directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116820 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
Use the SSAUpdator to turn calls to eh.exception that are not in a
landing pad into uses of registers rather than loads from a stack
slot. Doesn't touch the 'orrible hack code - Bill needs to persuade
me harder :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112952 91177308-0d34-0410-b5e6-96231b3b80d8
landing pad into uses of registers rather than loads from a stack
slot. Doesn't touch the 'orrible hack code - Bill needs to persuade
me harder :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112702 91177308-0d34-0410-b5e6-96231b3b80d8
any more. I plan to reimplement alloca promotion using SSAUpdater later.
It looks like Bill's URoR logic really always needs domtree, so the pass
now always asks for domtree info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112597 91177308-0d34-0410-b5e6-96231b3b80d8
instead of PromoteMemToReg. This allows it to stop using DF and DT,
eliminating a computation of DT and DF from clang -O3. Clang is now
down to 2 runs of DomFrontier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112457 91177308-0d34-0410-b5e6-96231b3b80d8
correct catch-all value. This saves having to iterate through all of the
selectors in the program again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107345 91177308-0d34-0410-b5e6-96231b3b80d8
and CallInst for getting hold
of the intrinsic's arguments
simplify along the way (at least for me this is much more legible now)
Bill, Baldrick or Anton, please review\!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106838 91177308-0d34-0410-b5e6-96231b3b80d8
which don't have a catch-all associated with them not just clean-ups. This fixes
the SingleSource/Benchmarks/Shootout-C++/except.cpp testcase that broke because
of my change r105902.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106772 91177308-0d34-0410-b5e6-96231b3b80d8
clean-up to a catch-all after inlining, take into account that there could be
filter IDs as well. The presence of filters don't mean that the selector catches
anything. It's just metadata information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@105872 91177308-0d34-0410-b5e6-96231b3b80d8
Probably the best way to know that all getOperand() calls have been handled
is to replace that API instead of updating.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101579 91177308-0d34-0410-b5e6-96231b3b80d8
with a fix for self-hosting
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101465 91177308-0d34-0410-b5e6-96231b3b80d8
with a fix
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101397 91177308-0d34-0410-b5e6-96231b3b80d8
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101364 91177308-0d34-0410-b5e6-96231b3b80d8
transform. I.e., if a clean-up eh.selector call dominates the invoke of an
_Unwind_Resume_or_Rethrow, then we convert the eh.selector into a
catch-all. This patch, however, uses the DominatorTree information, and doesn't
go through the whole rigmarole of starting at the eh.exception call, finding the
corresponding URoR and eh.selector calls, and trying to trace through any number
of instruction types to get to them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99846 91177308-0d34-0410-b5e6-96231b3b80d8
'invoke' instruction. You will get a situation like this:
bb:
%ehptr = eh.exception()
%sel = eh.selector(%ehptr, @per, 0);
...
bb2:
invoke _Unwind_Resume_or_Rethrow(%ehptr) %normal unwind to %lpad
lpad:
...
The unwinder will see the %sel call as a clean-up and, if it doesn't have a
catch further up the call stack, it will skip running it. But there *is* another
catch up the stack -- the catch for the %lpad. However, we can't see that. This
is fixed in code-gen, where we detect this situation, and convert the "clean-up"
selector call into a "catch-all" selector call. This gives us the correct
semantics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99671 91177308-0d34-0410-b5e6-96231b3b80d8
