It's horrible to inspect `MDNode`s in a debugger. All of their operands
that are `MDNode`s get dumped as `<badref>`, since we can't assign
metadata slots in the context of a `Metadata::dump()`. (Why not? Why
not assign numbers lazily? Because then each time you called `dump()`,
a given `MDNode` could have a different lazily assigned number.)
Fortunately, the C memory model gives us perfectly good identifiers for
`MDNode`. Add pointer addresses to the dumps, transforming this:
(lldb) e N->dump()
!{i32 662302, i32 26, <badref>, null}
(lldb) e ((MDNode*)N->getOperand(2))->dump()
!{i32 4, !"foo"}
into:
(lldb) e N->dump()
!{i32 662302, i32 26, <0x100706ee0>, null}
(lldb) e ((MDNode*)0x100706ee0)->dump()
!{i32 4, !"foo"}
and this:
(lldb) e N->dump()
0x101200248 = !{<badref>, <badref>, <badref>, <badref>, <badref>}
(lldb) e N->getOperand(0)
(const llvm::MDOperand) $0 = {
MD = 0x00000001012004e0
}
(lldb) e N->getOperand(1)
(const llvm::MDOperand) $1 = {
MD = 0x00000001012004e0
}
(lldb) e N->getOperand(2)
(const llvm::MDOperand) $2 = {
MD = 0x0000000101200058
}
(lldb) e N->getOperand(3)
(const llvm::MDOperand) $3 = {
MD = 0x00000001012004e0
}
(lldb) e N->getOperand(4)
(const llvm::MDOperand) $4 = {
MD = 0x0000000101200058
}
(lldb) e ((MDNode*)0x00000001012004e0)->dump()
!{}
(lldb) e ((MDNode*)0x0000000101200058)->dump()
!{null}
into:
(lldb) e N->dump()
!{<0x1012004e0>, <0x1012004e0>, <0x101200058>, <0x1012004e0>, <0x101200058>}
(lldb) e ((MDNode*)0x1012004e0)->dump()
!{}
(lldb) e ((MDNode*)0x101200058)->dump()
!{null}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224325 91177308-0d34-0410-b5e6-96231b3b80d8
It makes more sense for ThreadLocal<const T>::get to return a const T*
and ThreadLocal<T>::get to return a T*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224225 91177308-0d34-0410-b5e6-96231b3b80d8
The RAUW support in `Metadata` supports going to `nullptr` specifically
to handle values being deleted, causing `ValueAsMetadata` to be deleted.
Fix the case where the reference is from a `TrackingMDRef` (as opposed
to an `MDOperand` or a `MetadataAsValue`).
This is surprisingly rare -- metadata tracked by `TrackingMDRef` going
to null -- but it came up in an openSUSE bootstrap during inlining. The
tracking ref was held by the `ValueMap` because it was referencing a
local, the basic block containing the local became dead after it had
been merged in, and when the local was deleted, the tracking ref
asserted in an `isa`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@224146 91177308-0d34-0410-b5e6-96231b3b80d8
Split `Metadata` away from the `Value` class hierarchy, as part of
PR21532. Assembly and bitcode changes are in the wings, but this is the
bulk of the change for the IR C++ API.
I have a follow-up patch prepared for `clang`. If this breaks other
sub-projects, I apologize in advance :(. Help me compile it on Darwin
I'll try to fix it. FWIW, the errors should be easy to fix, so it may
be simpler to just fix it yourself.
This breaks the build for all metadata-related code that's out-of-tree.
Rest assured the transition is mechanical and the compiler should catch
almost all of the problems.
Here's a quick guide for updating your code:
- `Metadata` is the root of a class hierarchy with three main classes:
`MDNode`, `MDString`, and `ValueAsMetadata`. It is distinct from
the `Value` class hierarchy. It is typeless -- i.e., instances do
*not* have a `Type`.
- `MDNode`'s operands are all `Metadata *` (instead of `Value *`).
- `TrackingVH<MDNode>` and `WeakVH` referring to metadata can be
replaced with `TrackingMDNodeRef` and `TrackingMDRef`, respectively.
If you're referring solely to resolved `MDNode`s -- post graph
construction -- just use `MDNode*`.
- `MDNode` (and the rest of `Metadata`) have only limited support for
`replaceAllUsesWith()`.
As long as an `MDNode` is pointing at a forward declaration -- the
result of `MDNode::getTemporary()` -- it maintains a side map of its
uses and can RAUW itself. Once the forward declarations are fully
resolved RAUW support is dropped on the ground. This means that
uniquing collisions on changing operands cause nodes to become
"distinct". (This already happened fairly commonly, whenever an
operand went to null.)
If you're constructing complex (non self-reference) `MDNode` cycles,
you need to call `MDNode::resolveCycles()` on each node (or on a
top-level node that somehow references all of the nodes). Also,
don't do that. Metadata cycles (and the RAUW machinery needed to
construct them) are expensive.
- An `MDNode` can only refer to a `Constant` through a bridge called
`ConstantAsMetadata` (one of the subclasses of `ValueAsMetadata`).
As a side effect, accessing an operand of an `MDNode` that is known
to be, e.g., `ConstantInt`, takes three steps: first, cast from
`Metadata` to `ConstantAsMetadata`; second, extract the `Constant`;
third, cast down to `ConstantInt`.
The eventual goal is to introduce `MDInt`/`MDFloat`/etc. and have
metadata schema owners transition away from using `Constant`s when
the type isn't important (and they don't care about referring to
`GlobalValue`s).
In the meantime, I've added transitional API to the `mdconst`
namespace that matches semantics with the old code, in order to
avoid adding the error-prone three-step equivalent to every call
site. If your old code was:
MDNode *N = foo();
bar(isa <ConstantInt>(N->getOperand(0)));
baz(cast <ConstantInt>(N->getOperand(1)));
bak(cast_or_null <ConstantInt>(N->getOperand(2)));
bat(dyn_cast <ConstantInt>(N->getOperand(3)));
bay(dyn_cast_or_null<ConstantInt>(N->getOperand(4)));
you can trivially match its semantics with:
MDNode *N = foo();
bar(mdconst::hasa <ConstantInt>(N->getOperand(0)));
baz(mdconst::extract <ConstantInt>(N->getOperand(1)));
bak(mdconst::extract_or_null <ConstantInt>(N->getOperand(2)));
bat(mdconst::dyn_extract <ConstantInt>(N->getOperand(3)));
bay(mdconst::dyn_extract_or_null<ConstantInt>(N->getOperand(4)));
and when you transition your metadata schema to `MDInt`:
MDNode *N = foo();
bar(isa <MDInt>(N->getOperand(0)));
baz(cast <MDInt>(N->getOperand(1)));
bak(cast_or_null <MDInt>(N->getOperand(2)));
bat(dyn_cast <MDInt>(N->getOperand(3)));
bay(dyn_cast_or_null<MDInt>(N->getOperand(4)));
- A `CallInst` -- specifically, intrinsic instructions -- can refer to
metadata through a bridge called `MetadataAsValue`. This is a
subclass of `Value` where `getType()->isMetadataTy()`.
`MetadataAsValue` is the *only* class that can legally refer to a
`LocalAsMetadata`, which is a bridged form of non-`Constant` values
like `Argument` and `Instruction`. It can also refer to any other
`Metadata` subclass.
(I'll break all your testcases in a follow-up commit, when I propagate
this change to assembly.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223802 91177308-0d34-0410-b5e6-96231b3b80d8
It doesn't make sense to unique self-referencing nodes. Drop uniquing
for them.
Note that `MDNode::intersect()` occasionally returns self-referencing
nodes. Previously these would be returned by `MDNode::get()`. I'm not
convinced this was intended behaviour -- to me it seems it should return
a node whose only operand is the self-reference -- but I don't know much
about alias scopes so I'm preserving it for now.
This is part of PR21532.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223618 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently `MDNode` uniquing used to be optional. I suppose the
configure flag must have disappeared at some point. Change the test so
it actually tests uniquing, and remove the check for
`ENABLE_MDNODE_UNIQUING`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223617 91177308-0d34-0410-b5e6-96231b3b80d8
Fill in omission of `cast_or_null<>` and `dyn_cast_or_null<>` for types
that wrap pointers (e.g., smart pointers).
Type traits need to be slightly stricter than for `cast<>` and
`dyn_cast<>` to resolve ambiguities with simple types.
There didn't seem to be any unit tests for pointer wrappers, so I tested
`isa<>`, `cast<>`, and `dyn_cast<>` while I was in there.
This only supports pointer wrappers with a conversion to `bool` to check
for null. If in the future it's useful to support wrappers without such
a conversion, it should be a straightforward incremental step to use the
`simplify_type` machinery for the null check. In that case, the unit
tests should be updated to remove the `operator bool()` from the
`pointer_wrappers::PTy`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222644 91177308-0d34-0410-b5e6-96231b3b80d8
The logic for detecting EOF was wrong and would fail if we ever requested
more than 16k past the last read position.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222505 91177308-0d34-0410-b5e6-96231b3b80d8
If the template specialization for externally managed sets in
PostOrderIterator call too far out of sync with each other, this unit
test will fail to build. This is especially useful for developers who
may not build Clang (the only in-tree user) every time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222447 91177308-0d34-0410-b5e6-96231b3b80d8
"global-init", "global-init-src" and "global-init-type" were originally
used to blacklist entities in ASan init-order checker. However, they
were never documented, and later were replaced by "=init" category.
Old blacklist entries should be converted as follows:
* global-init:foo -> global:foo=init
* global-init-src:bar -> src:bar=init
* global-init-type:baz -> type:baz=init
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222401 91177308-0d34-0410-b5e6-96231b3b80d8
As detailed at http://llvm.org/PR20728, due to an internal overflow in
APFloat::multiplySignificand the APFloat::fusedMultiplyAdd method can return
incorrect results for x87DoubleExtended (x86_fp80) values. This commonly
manifests as incorrect constant folding of libm fmal calls on x86. E.g.
fmal(1.0L, 1.0L, 3.0L) == 0.0L (should be 4.0L)
This patch fixes PR20728 by adding an extra bit to the significand for
intermediate results of APFloat::multiplySignificand, avoiding the overflow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222374 91177308-0d34-0410-b5e6-96231b3b80d8
Having two ways to do this doesn't seem terribly helpful and
consistently using the insert version (which we already has) seems like
it'll make the code easier to understand to anyone working with standard
data structures. (I also updated many references to the Entry's
key and value to use first() and second instead of getKey{Data,Length,}
and get/setValue - for similar consistency)
Also removes the GetOrCreateValue functions so there's less surface area
to StringMap to fix/improve/change/accommodate move semantics, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222319 91177308-0d34-0410-b5e6-96231b3b80d8
The specializations were broken. For example,
void foo(const CallGraph *G) {
auto I = GraphTraits<const CallGraph *>::nodes_begin(G);
auto K = I++;
...
}
or
void bar(const CallGraphNode *N) {
auto I = GraphTraits<const CallGraphNode *>::nodes_begin(G);
auto K = I++;
....
}
would not compile.
Patch by Speziale Ettore!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@222149 91177308-0d34-0410-b5e6-96231b3b80d8
The fix is easy. Unfortunately, we had 0 tests, so adding one was somewhat
complicated.
Thanks to Kevin Enderby for the report.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221899 91177308-0d34-0410-b5e6-96231b3b80d8
Windows normally limits the length of an absolute path name to 260
characters; directories can have lower limits. These limits increase
to about 32K if you use absolute paths with the special '\\?\'
prefix. Teach Support\Windows\Path.inc to use that prefix as needed.
TODO: Other parts of Support could also learn to use this prefix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221841 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids an issue where AtEndOfStream mistakenly returns true at the /start/ of
a stream.
(In the rare case that the size is known and actually 0, the slow path will still
handle it correctly.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221840 91177308-0d34-0410-b5e6-96231b3b80d8
A subtle bug was found where attempting to copy a non-const function_ref
lvalue would actually invoke the generic forwarding constructor (as it
was a closer match - being T& rather than the const T& of the implicit
copy constructor). In the particular case this lead to a dangling
function_ref member (since it had referenced the function_ref passed by
value to its ctor, rather than the outer function_ref that was still
alive)
SFINAE the converting constructor to not be considered if the copy
constructor is available and demonstrate that this causes the copy to
refer to the original functor, not to the function_ref it was copied
from. (without the code change, the test would fail as Y would be
referencing X and Y() would see the result of the mutation to X, ie: 2)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221753 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed that it was untested, and forcing it on caused some tests to fail:
LLVM :: Linker/metadata-a.ll
LLVM :: Linker/prefixdata.ll
LLVM :: Linker/type-unique-odr-a.ll
LLVM :: Linker/type-unique-simple-a.ll
LLVM :: Linker/type-unique-simple2-a.ll
LLVM :: Linker/type-unique-simple2.ll
LLVM :: Linker/type-unique-type-array-a.ll
LLVM :: Linker/unnamed-addr1-a.ll
LLVM :: Linker/visibility1.ll
If it is to be resurrected, it has to be fixed and we should probably have a
-preserve-source command line option in llvm-mc and run tests with and without
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220741 91177308-0d34-0410-b5e6-96231b3b80d8
These just delegate to the underlying vector type in the MapVector.
Also just add in some sanity unittests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220687 91177308-0d34-0410-b5e6-96231b3b80d8
