Clang sets the float-abi target option manually, but no longer
annotates each function with its ABI. This can lead to confusing
mistmatch between "clang -emit-llvm | llc" and normal clang
invocations.
Besides which, gnueabihf actually *is* hard-float. Defaulting to soft
was just perverse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197554 91177308-0d34-0410-b5e6-96231b3b80d8
The .end directive indicates the end of the file. No further instructions are
processed after a .end directive is encountered.
One potential (glaringly obvious) optimisation that could be pursued here is to
extend MCAsmParser with a DiscardRemainder method to avoid processing lexemes to
the end of the file. It was unclear at this point if that would be worth
adding, and could easily be added in a follow on change.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197547 91177308-0d34-0410-b5e6-96231b3b80d8
This simplifies type unit and type unit reference creation as well as
setting the stage for inter-type hashing across type unit boundaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197539 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the "n" and "S" components of the data layout for mips. Clang
already gets this right.
This will be tested in clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197536 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction definitions in the PPC backend have a number of variants
defined for the same instruction to represent differences between 64-bit and
32-bit semantics. In order to generate a disassembler for the PPC backend, we
need to mark all but one of these as CodeGen only.
No functionality change intended; this is prep work for PPC disassembly
support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197535 91177308-0d34-0410-b5e6-96231b3b80d8
The convention used to specify the PowerPC ISA is that bits are numbered in
reverse order (0 is the index of the high bit). To support this "little endian"
encoding convention, CodeEmitterGen will reverse the bit numberings prior to
generating the encoding tables. In order to generate a disassembler,
FixedLenDecoderEmitter needs to do the same.
This moves the bit reversal logic out of CodeEmitterGen and into CodeGenTarget
(where it can be used by both CodeEmitterGen and FixedLenDecoderEmitter). This
is prep work for disassembly support in the PPC backend (which is the only
in-tree user of this little-endian encoding support).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197532 91177308-0d34-0410-b5e6-96231b3b80d8
Without this, assembling clang's disassembly would produce an object
file with the IMAGE_SCN_CNT_INITIALIZED_DATA section characteristic
rather than the uninitialized one. link.exe would warn when merging
comdats with different flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197529 91177308-0d34-0410-b5e6-96231b3b80d8
This effectively backs out r197465 but leaves some of the general
fixes in place. Not all targets are ready to handle this feature. To
enable it, some infrastructure work is needed to better handle
register class constraints.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197514 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r197438 and fixes the link-time circular dependency between
IR and Support. The fix consists in moving the diagnostic support into IR.
The patch adds a new LLVMContext::diagnose that can be used to communicate to
the front-end, if any, that something of interest happened.
The diagnostics are supported by a new abstraction, the DiagnosticInfo class.
The base class contains the following information:
- The kind of the report: What this is about.
- The severity of the report: How bad this is.
This patch also adds 2 classes:
- DiagnosticInfoInlineAsm: For inline asm reporting. Basically, this diagnostic
will be used to switch to the new diagnostic API for LLVMContext::emitError.
- DiagnosticStackSize: For stack size reporting. Comes as a replacement of the
hard coded warning in PEI.
This patch also features dynamic diagnostic identifiers. In other words plugins
can use this infrastructure for their own diagnostics (for more details, see
getNextAvailablePluginDiagnosticKind).
This patch introduces a new DiagnosticHandlerTy and a new DiagnosticContext in
the LLVMContext that should be set by the front-end to be able to map these
diagnostics in its own system.
http://llvm-reviews.chandlerc.com/D2376
<rdar://problem/15515174>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197508 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197481, recommiting r197469 with an extra fix.
The vastart_save_xmm_regs pseudo-instruction expands to a test and a
branch, so it modifies EFLAGS. Mark it so, or else the scheduler might
place it in the middle of another test+branch.
This fixes a bug exposed by r192750, which changed the initial scheduler
to source-order as part of enabling the MI Scheduler for X86.
This re-commit changes the VASTART_SAVE_XMM_REGS custom inserter not to
try to save %flags, and adds a test that catches the bad behavior of
r197469.
<rdar://problem/15627766>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197503 91177308-0d34-0410-b5e6-96231b3b80d8
http://llvm.org/bugs/show_bug.cgi?id=18045
Short issue description:
For X86 machines with sse < sse4.1 we got failures for some
particular load/store vector sequences:
$ clang-trunk -m32 -O2 test-case.c
fatal error: error in backend: Cannot select: 0x4200920: v4i32,ch = load 0x41d6ab0, 0x4205850,
0x41dcb10<LD16[getelementptr inbounds ([4 x i32]* @e, i32 0, i32 0)](align=4)> [ORD=82]
[ID=58]
0x4205850: i32 = X86ISD::Wrapper 0x41d5490 [ORD=26] [ID=43]
0x41d5490: i32 = TargetGlobalAddress<[4 x i32]* @e> 0 [ORD=26] [ID=23]
0x41dcb10: i32 = undef [ID=2]
The reason is that EltsFromConsecutiveLoads could emit such load instruction
both before and after legalize stage. Though this instruction is not legal for
machines with SSSE3 and lower.
The fix: In EltsFromConsecutiveLoads, if we have passed legalize stage, we
check whether nodes it emits are legal.
P.S.: If you get failure in time from 12:00 and till 22:00 (UTC-8),
perhaps I'll slow with response, so you better reject this commit. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197492 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r197469.
The sanitizer and dragonegg buildbots are failing, I think because of
this change. Reverting until I figure out why.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197481 91177308-0d34-0410-b5e6-96231b3b80d8
The vastart_save_xmm_regs pseudo-instruction expands to a test and a
branch, so it modifies EFLAGS. Mark it so, or else the scheduler might
place it in the middle of another test+branch.
This fixes a bug exposed by r192750, which turned on the MI Scheduler
for X86.
<rdar://problem/15627766>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197469 91177308-0d34-0410-b5e6-96231b3b80d8
With llvm-config.exe --bindir --libdir --build-mode, on Visual Studio 2010,
In build tree:
(OBJ_ROOT)/bin/MinSizeRel
(OBJ_ROOT)/lib/MinSizeRel
MinSizeRel
In installed tree:
(INSTALL_PREFIX)/bin
(INSTALL_PREFIX)/lib
MinSizeRel
This is enhancements since r196283.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197467 91177308-0d34-0410-b5e6-96231b3b80d8
Without this, MachineCSE is powerless to handle redundant operations with truncated source operands.
This required fixing the 2-addr pass to handle tied subregisters. It isn't clear what combinations of subregisters can legally be tied, but the simple case of truncated source operands is now safely handled:
%vreg11<def> = COPY %vreg1:sub_32bit; GR32:%vreg11 GR64:%vreg1
%vreg12<def> = COPY %vreg2:sub_32bit; GR32:%vreg12 GR64:%vreg2
%vreg13<def,tied1> = ADD32rr %vreg11<tied0>, %vreg12<kill>, %EFLAGS<imp-def>
Test case: cse-add-with-overflow.ll.
This exposed an existing bug in
PPCInstrInfo::commuteInstruction. Thanks to Rafael for the test case:
PowerPC/crash.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197465 91177308-0d34-0410-b5e6-96231b3b80d8
Re-reading the comment I updated in previous commit, it's better to make
it more explicit and avoid ambiguity more effectively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197458 91177308-0d34-0410-b5e6-96231b3b80d8
A phi node operand or an instruction operand could be a constant expression that
can trap (division). Check that we don't vectorize such cases.
PR16729
radar://15653590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197449 91177308-0d34-0410-b5e6-96231b3b80d8
DiagnosticPrinter.cpp.
These was creating a link time dependencies of IR on CodeGen and Analysis.
Part of <rdar://problem/15515174>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197447 91177308-0d34-0410-b5e6-96231b3b80d8
This missing parameter was causing bin/llvm-lit to run the unittests
from my primary build directory instead of my self-hosting build
directory because llvm-config was on my PATH.
This more closely matches what 'make check' will pass to lit.py.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197444 91177308-0d34-0410-b5e6-96231b3b80d8
The patch adds a new LLVMContext::diagnose that can be used to communicate to
the front-end, if any, that something of interest happened.
The diagnostics are supported by a new abstraction, the DiagnosticInfo class.
The base class contains the following information:
- The kind of the report: What this is about.
- The severity of the report: How bad this is.
This patch also adds 2 classes:
- DiagnosticInfoInlineAsm: For inline asm reporting. Basically, this diagnostic
will be used to switch to the new diagnostic API for LLVMContext::emitError.
- DiagnosticStackSize: For stack size reporting. Comes as a replacement of the
hard coded warning in PEI.
This patch also features dynamic diagnostic identifiers. In other words plugins
can use this infrastructure for their own diagnostics (for more details, see
getNextAvailablePluginDiagnosticKind).
This patch introduces a new DiagnosticHandlerTy and a new DiagnosticContext in
the LLVMContext that should be set by the front-end to be able to map these
diagnostics in its own system.
http://llvm-reviews.chandlerc.com/D2376
<rdar://problem/15515174>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197438 91177308-0d34-0410-b5e6-96231b3b80d8
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197432 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the WebKit_JS calling convention to perform partial writes on a 4
byte granularity to stack slots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197431 91177308-0d34-0410-b5e6-96231b3b80d8
