It is not clear if this would work or not with LLVM_NO_DEAD_STRIP
binaries, so be conservative for now.
Patch by Xan López.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240287 91177308-0d34-0410-b5e6-96231b3b80d8
The cmake check for whether libatomic could be used had been
unconditionally setting the result to false. Which was somewhat
fortunate, because the prerequisite check for whether it was *needed*
was always claiming it was, even if it was not.
However, this made platforms where libatomic is actually necessary
fail to link.
Differential Revision: http://reviews.llvm.org/D10453
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239819 91177308-0d34-0410-b5e6-96231b3b80d8
- Who defines ${LLVM_SOURCE_DIR} ?
- Would windows_version_resource.rc be available in an *installed* llvm tree?
I suggest it may be installed in ${PREFIX}/share.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239703 91177308-0d34-0410-b5e6-96231b3b80d8
This reinstates my commits r238740/r238741 which I reverted due to a failure
in the clang-cl selfhost tests on Windows. I've now fixed the issue in
clang-cl that caused the failure so hopefully all should be well now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239612 91177308-0d34-0410-b5e6-96231b3b80d8
The clang Windows bots are showing mysterious failures.
Reverting until I can figure out what's going on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238744 91177308-0d34-0410-b5e6-96231b3b80d8
It caused the following failure:
"Policy CMP0026 is not set: Disallow use of the LOCATION target property."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238741 91177308-0d34-0410-b5e6-96231b3b80d8
This embeds Windows version information into our executables and DLLs.
The most visible place to view this data is in the details tab of the file
properties window in Windows explorer.
Differential Revision: http://reviews.llvm.org/D7828
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238740 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Multi-configuration builds put their binaries into ${CMAKE_BINARY_DIR}/Release/bin/. The table-gen cross-compilation support needs to take that into account.
Reviewers: yaron.keren
Reviewed By: yaron.keren
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10102
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238592 91177308-0d34-0410-b5e6-96231b3b80d8
I can't actually test this properly because uninstalling MSVC 2015 CTP 6
and reinstalling the 2015 RC takes hours. I can only verify that this
doesn't mess up MSVC 2013 and 2015 CTP 6 builds, which is what I've
done.
Should fix PR23513.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237743 91177308-0d34-0410-b5e6-96231b3b80d8
When building libc++abi in a standalone configuration the CMake option
'LLVM_ABI_BREAKING_CHECKS` will not be defined.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237204 91177308-0d34-0410-b5e6-96231b3b80d8
The gold binary is not required to build the plugin. All that is
needed is for LLVM_BINUTILS_INCDIR to point to the directory
containing plugin-api.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235918 91177308-0d34-0410-b5e6-96231b3b80d8
In CMake dependencies can be filenames or targets, and targets can't be filenames. The Ninja generator handles filename dependencies because it generates targets for every output file from a command. For example:
add_custom_command(OUTPUT foo.txt COMMAND touch foo.txt)
With the Ninja generator this generates a target foo.txt, but with the Makefile generator it doesn't. This is probably because Ninja explicitly requires these hard dependency ties, and Make just behaves oddly in general.
To fix this we need to make the tablegen actions depend on a target rather than a filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235732 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the following targets to cmake. These can be used to build and link only specific parts of a backend, instead of having to link the whole backend.
- AllTargetsAsmPrinters, AllTargetsAsmParsers, AllTargetsDescs, AllTargetsDisassemblers, AllTargetsInfos
A typical use for these is instead of linking ${LLVM_TARGETS_TO_BUILD}. This commit changes llvm-mc to show how to use the new targets.
Reviewed by Chris Bieneman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235324 91177308-0d34-0410-b5e6-96231b3b80d8
The CMake install command is defined as:
install(TARGETS targets... [EXPORT <export-name>]
[[ARCHIVE|LIBRARY|RUNTIME|FRAMEWORK|BUNDLE|
PRIVATE_HEADER|PUBLIC_HEADER|RESOURCE]
[DESTINATION <dir>]
[INCLUDES DESTINATION [<dir> ...]]
[PERMISSIONS permissions...]
[CONFIGURATIONS [Debug|Release|...]]
[COMPONENT <component>]
[OPTIONAL] [NAMELINK_ONLY|NAMELINK_SKIP]
] [...])
This means it can only take one parameter from the set of RUNTIME, LIBRARY, or ARCHIVE. If you set more than one of these it seems to gobble up the extra arguments and ignore the COMPONENT argument.
This adds a check to only set LIBRARY or ARCHIVE based on whether or not the library being built is shared.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235113 91177308-0d34-0410-b5e6-96231b3b80d8
Certain versions of CMake specify /W3 as part of CMAKE_CXX_FLAGS
by default, before you do anything. Appending /W4 to the end of
this and using the Ninja generator results in
cl : Command line warning D9025 : overriding '/W3' with '/W4'.
It is not possible to suppress this since it is a command line
warning and not a compiler warning, so we must fix the command
line to contain only one value for /Wn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234907 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, on ELF there is not used attribute on the .o files,
so there is no easy way to keep the dump function alive.
If we are not gcing, we may as well produce non gcable files and
avoid the cost.
Linking a debug clang now takes 18.856225992 seconds, before it
took 21.206897447.
I will try avoiding --gc-sections -O3 on a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234159 91177308-0d34-0410-b5e6-96231b3b80d8
Added a new boolean CMake flag, LLVM_INSTALL_UTILS. When set,
the 'install' target will include in the bin directory the
utils binaries - e.g. FileCheck. This mirrors the autoconfig
behavior.
Test Plan:
Locally verified that utils binaries are copied when flag is set,
and not copied when flag is not set.
Reviewers: jfb, dschuff, beanz
Reviewed By: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8587
Patch by Mircea Trofin
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233385 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is an attempt at making `DenseMapIterator`s "fail-fast".
Fail-fast iterators that have been invalidated due to insertion into
the host `DenseMap` deterministically trip an assert (in debug mode)
on access, instead of non-deterministically hitting memory corruption
issues.
Enabling fail-fast iterators breaks the LLVM C++ ABI, so they are
predicated on `LLVM_ENABLE_ABI_BREAKING_CHECKS`.
`LLVM_ENABLE_ABI_BREAKING_CHECKS` by default flips with
`LLVM_ENABLE_ASSERTS`, but can be clamped to ON or OFF using the CMake /
autoconf build system.
Reviewers: chandlerc, dexonsmith, rnk, zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8351
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233310 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change makes CMake scan for lit suites and generate a target for each lit test suite. The targets follow the format check-<project>-<suite path>.
For example:
check-llvm-unit - Runs the LLVM unit tests
check-llvm-codegen-arm - Runs the ARM codeine tests
Note: These targets are not generated during multi-configuration generators (i.e. Xcode and Visual Studio) because target clutter impacts UI usability.
* Also fixed a minor issue that Duncan pointed out to me I was passing the suite to lit twice
Reviewers: chandlerc
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8380
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233009 91177308-0d34-0410-b5e6-96231b3b80d8
This works in a similar way to the gold plugin tests. We search for a compatible
linker on $PATH and use it to run tests against our just-built libLTO. To start
with, test the just added opt level functionality.
Differential Revision: http://reviews.llvm.org/D8472
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232785 91177308-0d34-0410-b5e6-96231b3b80d8
The dependencies for cross-built tablegen were a bit confused. This fixes that. The following dependencies are now enforced:
(1) Tablegen tasks depend on the native tablegen
(2) Native tablegen depends on the cross-compiled tablegen
Although the native tablegen doesn't actually require the cross tablegen, having this dependency forces the native tablegen to rebuild whenever the cross tablegen changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232730 91177308-0d34-0410-b5e6-96231b3b80d8
NFC currently but required as a prerequisite for using
the Microsoft resource compiler in conjunction with
CMake's ninja generator, which knows how to filter flags
appropriately, but not definitions.
Differential Revision: http://reviews.llvm.org/D8188
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232727 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change makes CMake scan for lit suites and generate a target for each lit test suite. The targets follow the format check-<project>-<suite path>.
For example:
check-llvm-unit - Runs the LLVM unit tests
check-llvm-codegen-arm - Runs the ARM codeine tests
Note: These targets are not generated during multi-configuration generators (i.e. Xcode and Visual Studio) because target clutter impacts UI usability.
Reviewers: chandlerc
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D8380
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232671 91177308-0d34-0410-b5e6-96231b3b80d8
