return the pointer being dereferenced, it returns the pointee, but a call
might return the pointer itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130979 91177308-0d34-0410-b5e6-96231b3b80d8
1. Only run the early (in the module pass pipe) instcombine/simplifycfg
if the "unit at a time" passes they are cleaning up after runs.
2. Move the "clean up after the unroller" pass to the very end of the
function-level pass pipeline. Loop unroll uses instsimplify now,
so it doesn't create a ton of trash. Moving instcombine later allows
it to clean up after opportunities are exposed by GVN, DSE, etc.
3. Introduce some phase ordering tests for things that are specifically
intended to be simplified by the full optimizer as a whole.
This resolves PR2338, and is progress towards PR6627, which will be
generating code that looks similar to test2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130241 91177308-0d34-0410-b5e6-96231b3b80d8
generated by llvm-gcc, since llvm-gcc uses 2 i64s for passing a 4 x float
vector on ARM rather than an i64 array like Clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129878 91177308-0d34-0410-b5e6-96231b3b80d8
the same allocation size but different primitive sizes(e.g., <3xi32> and
<4xi32>). When ScalarRepl promotes them, it can't use a bit cast but
should use a shuffle vector instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129472 91177308-0d34-0410-b5e6-96231b3b80d8
vector types. This helps a lot with inlined functions when using the ARM soft
float ABI. Fixes <rdar://problem/9184212>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128453 91177308-0d34-0410-b5e6-96231b3b80d8
chose is having a non-memcpy/memset use and being larger than any native integer
type. Originally I chose having an access of a size smaller than the total size
of the alloca, but this caused some minor issues on the spirit benchmark where
SRoA runs again after some inlining.
This fixes <rdar://problem/8613163>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127718 91177308-0d34-0410-b5e6-96231b3b80d8
a union of a float, <2 x float>, and <4 x float>. This mostly comes up with the
use of vector intrinsics, especially in NEON when programmers know the layout of
the register file. This enables codegen to eliminate a lot of the subregister
traffic it would otherwise generate.
This commit only enables this for a small number of floating-point cases, but a
lot more integer cases. I assume this is okay for all ports, but I did not do
extensive testing of the quality of code involving i512 vectors and the like. If
there is a use case where this generates worse code than before, let me know and
we can scale it back.
This fixes <rdar://problem/9036264>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127317 91177308-0d34-0410-b5e6-96231b3b80d8
occurs because instcombine sinks loads and inserts phis. This kicks in
on such apps as 175.vpr, eon, 403.gcc, xalancbmk and a bunch of times in
spec2006 in some app that uses std::deque.
This resolves the last of rdar://7339113.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124090 91177308-0d34-0410-b5e6-96231b3b80d8
common cases. This triggers a surprising number of times in SPEC2K6
because min/max idioms end up doing this. For example, code from the
STL ends up looking like this to SRoA:
%202 = load i64* %__old_size, align 8, !tbaa !3
%203 = load i64* %__old_size, align 8, !tbaa !3
%204 = load i64* %__n, align 8, !tbaa !3
%205 = icmp ult i64 %203, %204
%storemerge.i = select i1 %205, i64* %__n, i64* %__old_size
%206 = load i64* %storemerge.i, align 8, !tbaa !3
We can now promote both the __n and the __old_size allocas.
This addresses another chunk of rdar://7339113, poor codegen on
stringswitch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124088 91177308-0d34-0410-b5e6-96231b3b80d8
that have PHI or select uses of their element pointers. This can often happen
when instcombine sinks two loads into a successor, inserting a phi or select.
With this patch, we can scalarize the alloca, but the pinned elements are not
yet promoted. This is still a win for large aggregates where only one element
is used. This fixes rdar://8904039 and part of rdar://7339113 (poor codegen
on stringswitch).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124070 91177308-0d34-0410-b5e6-96231b3b80d8
then don't try to decimate it into its individual pieces. This will just make a mess of the
IR and is pointless if none of the elements are individually accessed. This was generating
really terrible code for std::bitset (PR8980) because it happens to be lowered by clang
as an {[8 x i8]} structure instead of {i64}.
The testcase now is optimized to:
define i64 @test2(i64 %X) {
br label %L2
L2: ; preds = %0
ret i64 %X
}
before we generated:
define i64 @test2(i64 %X) {
%sroa.store.elt = lshr i64 %X, 56
%1 = trunc i64 %sroa.store.elt to i8
%sroa.store.elt8 = lshr i64 %X, 48
%2 = trunc i64 %sroa.store.elt8 to i8
%sroa.store.elt9 = lshr i64 %X, 40
%3 = trunc i64 %sroa.store.elt9 to i8
%sroa.store.elt10 = lshr i64 %X, 32
%4 = trunc i64 %sroa.store.elt10 to i8
%sroa.store.elt11 = lshr i64 %X, 24
%5 = trunc i64 %sroa.store.elt11 to i8
%sroa.store.elt12 = lshr i64 %X, 16
%6 = trunc i64 %sroa.store.elt12 to i8
%sroa.store.elt13 = lshr i64 %X, 8
%7 = trunc i64 %sroa.store.elt13 to i8
%8 = trunc i64 %X to i8
br label %L2
L2: ; preds = %0
%9 = zext i8 %1 to i64
%10 = shl i64 %9, 56
%11 = zext i8 %2 to i64
%12 = shl i64 %11, 48
%13 = or i64 %12, %10
%14 = zext i8 %3 to i64
%15 = shl i64 %14, 40
%16 = or i64 %15, %13
%17 = zext i8 %4 to i64
%18 = shl i64 %17, 32
%19 = or i64 %18, %16
%20 = zext i8 %5 to i64
%21 = shl i64 %20, 24
%22 = or i64 %21, %19
%23 = zext i8 %6 to i64
%24 = shl i64 %23, 16
%25 = or i64 %24, %22
%26 = zext i8 %7 to i64
%27 = shl i64 %26, 8
%28 = or i64 %27, %25
%29 = zext i8 %8 to i64
%30 = or i64 %29, %28
ret i64 %30
}
In this case, instcombine was able to eliminate the nonsense, but in PR8980 enough
PHIs are in play that instcombine backs off. It's better to not generate this stuff
in the first place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123571 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minor extension of SROA to handle a special case that is
important for some ARM NEON operations. Some of the NEON intrinsics
return multiple values, which are handled as struct types containing
multiple elements of the same vector type. The corresponding return
types declared in the arm_neon.h header have equivalent arrays. We
need SROA to recognize that it can split up those arrays and structs
into separate vectors, even though they are not always accessed with
the same type. SROA already handles loads and stores of an entire
alloca by using insertvalue/extractvalue to access the individual
pieces, and that code works the same regardless of whether the type
is a struct or an array. So, all that needs to be done is to check
for compatible arrays and homogeneous structs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123381 91177308-0d34-0410-b5e6-96231b3b80d8
SROA only split up structs and arrays one level at a time, so padding can
only cause trouble if it is located in between the struct or array elements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123380 91177308-0d34-0410-b5e6-96231b3b80d8
if it is passed as a byval argument. The byval argument will just be a
read, so it is safe to read from the original global instead. This allows
us to promote away the %agg.tmp alloca in PR8582
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119686 91177308-0d34-0410-b5e6-96231b3b80d8
on llvmdev: SRoA is introducing MMX datatypes like <1 x i64>,
which then cause random problems because the X86 backend is
producing mmx stuff without inserting proper emms calls.
In the short term, force off MMX datatypes. In the long term,
the X86 backend should not select generic vector types to MMX
registers. This is being worked on, but won't be done in time
for 2.8. rdar://8380055
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112696 91177308-0d34-0410-b5e6-96231b3b80d8
are the same. I had already fixed a similar problem where the source and
destination were different bitcasts derived from the same alloca, but the
previous fix still did not handle the case where both operands are exactly
the same value. Radar 7552893.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93848 91177308-0d34-0410-b5e6-96231b3b80d8
missing check that an array reference doesn't go past the end of the array,
and remove some redundant checks for in-bound array and vector references
that are no longer needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91897 91177308-0d34-0410-b5e6-96231b3b80d8
bootstrap. This also replaces the WeakVH references that Chris objected to
with normal Value references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91711 91177308-0d34-0410-b5e6-96231b3b80d8
problem", this broke llvm-gcc bootstrap for release builds on
x86_64-apple-darwin10.
This reverts commit db22309800b224a9f5f51baf76071d7a93ce59c9.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91534 91177308-0d34-0410-b5e6-96231b3b80d8
found last time. Instead of trying to modify the IR while iterating over it,
I've change it to keep a list of WeakVH references to dead instructions, and
then delete those instructions later. I also added some special case code to
detect and handle the situation when both operands of a memcpy intrinsic are
referencing the same alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91459 91177308-0d34-0410-b5e6-96231b3b80d8
While scanning through the uses of an alloca, keep track of the current offset
relative to the start of the alloca, and check memory references to see if
the offset & size correspond to a component within the alloca. This has the
nice benefit of unifying much of the code from isSafeUseOfAllocation,
isSafeElementUse, and isSafeUseOfBitCastedAllocation. The code to rewrite
the uses of a promoted alloca, after it is determined to be safe, is
reorganized in the same way.
Also, when rewriting GEP instructions, mark them as "in-bounds" since all the
indices are known to be safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91184 91177308-0d34-0410-b5e6-96231b3b80d8
array indexes. The "complex" case of SRoA still handles them, and correctly.
This fixes a weirdness where we'd correctly avoid transforming A[0][42] if
the 42 was too large, but we'd only do it if it was one gep, not two separate
ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90007 91177308-0d34-0410-b5e6-96231b3b80d8
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81537 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
RewriteStoreUserOfWholeAlloca deal with tail padding because
isSafeUseOfBitCastedAllocation expects them to. Otherwise, we crash
trying to erase the bitcast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72688 91177308-0d34-0410-b5e6-96231b3b80d8
method, fixing a crash on PR4146. While the store will
ultimately overwrite the "padded size" number of bits in memory,
the stored value may be a subset of this size. This function
only wants to handle the case where all bits are stored.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71224 91177308-0d34-0410-b5e6-96231b3b80d8
accessed at least once as a vector. This prevents it from
compiling the example in not-a-vector into:
define double @test(double %A, double %B) {
%tmp4 = insertelement <7 x double> undef, double %A, i32 0
%tmp = insertelement <7 x double> %tmp4, double %B, i32 4
%tmp2 = extractelement <7 x double> %tmp, i32 4
ret double %tmp2
}
instead, producing the integer code. Producing vectors when they
aren't otherwise in the program is dangerous because a lot of other
code treats them carefully and doesn't want to break them down.
OTOH, many things want to break down tasty i448's.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63638 91177308-0d34-0410-b5e6-96231b3b80d8
With the new world order, it can handle cases where the first
store into the alloca is an element of the vector, instead of
requiring the first analyzed store to have the vector type
itself. This allows us to un-xfail
test/CodeGen/X86/vec_ins_extract.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63590 91177308-0d34-0410-b5e6-96231b3b80d8
be able to handle *ANY* alloca that is poked by loads and stores of
bitcasts and GEPs with constant offsets. Before the code had a number
of annoying limitations and caused it to miss cases such as storing into
holes in structs and complex casts (as in bitfield-sroa) where we had
unions of bitfields etc. This also handles a number of important cases
that are exposed due to the ABI lowering stuff we do to pass stuff by
value.
One case that is pretty great is that we compile
2006-11-07-InvalidArrayPromote.ll into:
define i32 @func(<4 x float> %v0, <4 x float> %v1) nounwind {
%tmp10 = call <4 x i32> @llvm.x86.sse2.cvttps2dq(<4 x float> %v1)
%tmp105 = bitcast <4 x i32> %tmp10 to i128
%tmp1056 = zext i128 %tmp105 to i256
%tmp.upgrd.43 = lshr i256 %tmp1056, 96
%tmp.upgrd.44 = trunc i256 %tmp.upgrd.43 to i32
ret i32 %tmp.upgrd.44
}
which turns into:
_func:
subl $28, %esp
cvttps2dq %xmm1, %xmm0
movaps %xmm0, (%esp)
movl 12(%esp), %eax
addl $28, %esp
ret
Which is pretty good code all things considering :).
One effect of this is that SROA will start generating arbitrary bitwidth
integers that are a multiple of 8 bits. In the case above, we got a
256 bit integer, but the codegen guys assure me that it can handle the
simple and/or/shift/zext stuff that we're doing on these operations.
This addresses rdar://6532315
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63469 91177308-0d34-0410-b5e6-96231b3b80d8
loads from allocas that cover the entire aggregate. This handles
some memcpy/byval cases that are produced by llvm-gcc. This triggers
a few times in kc++ (with std::pair<std::_Rb_tree_const_iterator
<kc::impl_abstract_phylum*>,bool>) and once in 176.gcc (with %struct..0anon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61915 91177308-0d34-0410-b5e6-96231b3b80d8
integer to a (transitive) bitcast the alloca and if that integer
has the full size of the alloca, then it clobbers the whole thing.
Handle this by extracting pieces out of the stored integer and
filing them away in the SROA'd elements.
This triggers fairly frequently because the CFE uses integers to
pass small structs by value and the inliner exposes these. For
example, in kimwitu++, I see a bunch of these with i64 stores to
"%struct.std::pair<std::_Rb_tree_const_iterator<kc::impl_abstract_phylum*>,bool>"
In 176.gcc I see a few i32 stores to "%struct..0anon".
In the testcase, this is a difference between compiling test1 to:
_test1:
subl $12, %esp
movl 20(%esp), %eax
movl %eax, 4(%esp)
movl 16(%esp), %eax
movl %eax, (%esp)
movl (%esp), %eax
addl 4(%esp), %eax
addl $12, %esp
ret
vs:
_test1:
movl 8(%esp), %eax
addl 4(%esp), %eax
ret
The second half of this will be to handle loads of the same form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61853 91177308-0d34-0410-b5e6-96231b3b80d8
This includes not marking a GEP involving a vector as unsafe, but only when it
has all zero indices. This allows scalarrepl to work in a few more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57177 91177308-0d34-0410-b5e6-96231b3b80d8
I originally made this script to show that scalarrepl didn't support them, but
it turned out it does. Better to still add the testcase then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56781 91177308-0d34-0410-b5e6-96231b3b80d8
structures. Its default threshold is to promote things that are
smaller than 128 bytes, which is sane. However, it is not sane
to do this for things that turn into 128 *registers*. Add a cap
on the number of registers introduced, defaulting to 128/4=32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52611 91177308-0d34-0410-b5e6-96231b3b80d8
cases quoting of <{ didn't work out, so I changed the grep to check for }>
instead.
This fixes 7 testcases that were not properly running before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52182 91177308-0d34-0410-b5e6-96231b3b80d8
work and how to replace them into individual values. Also, when trying to
replace an aggregrate that is used by load or store with a single (large)
integer, don't crash (but don't replace the aggregrate either).
Also adds a testcase for both structs and arrays.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51997 91177308-0d34-0410-b5e6-96231b3b80d8
a union containing a vector and an array whose elements were smaller than
the vector elements. this means we need to compile the load of the
array elements into an extract element plus a truncate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47752 91177308-0d34-0410-b5e6-96231b3b80d8
In practice this can only happen on code with already undefined behavior,
but this is still a good thing to handle correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46539 91177308-0d34-0410-b5e6-96231b3b80d8
or getTypeSizeInBits as appropriate in ScalarReplAggregates.
The right change to make was not always obvious, so it would
be good to have an sroa guru review this. While there I noticed
some bugs, and fixed them: (1) arrays of x86 long double have
holes due to alignment padding, but this wasn't being spotted
by HasStructPadding (renamed to HasPadding). The same goes
for arrays of oddly sized ints. Vectors also suffer from this,
in fact the problem for vectors is much worse because basic
vector assumptions seem to be broken by vectors of type with
alignment padding. I didn't try to fix any of these vector
problems. (2) The code for extracting smaller integers from
larger ones (in the "int union" case) was wrong on big-endian
machines for integers with size not a multiple of 8, like i1.
Probably this is impossible to hit via llvm-gcc, but I fixed
it anyway while there and added a testcase. I also got rid of
some trailing whitespace and changed a function name which
had an obvious typo in it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43672 91177308-0d34-0410-b5e6-96231b3b80d8
