Change the return of `MDNode::isDistinct()` for `MDNode::getTemporary()`
to `true`. They aren't uniqued.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225646 91177308-0d34-0410-b5e6-96231b3b80d8
One is that AArch64 has additional restrictions on when local relocations can
be used. We have to take those into consideration when deciding to put a L
symbol in the symbol table or not.
The other is that ld64 requires the relocations to cstring to use linker
visible symbols on AArch64.
Thanks to Michael Zolotukhin for testing this!
Remove doesSectionRequireSymbols.
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225644 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for parsing and emitting the SBREL relocation variant for the
ARM target. Handling this relocation variant is necessary for supporting the
full ARM ELF specification. Addresses PR22128.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225595 91177308-0d34-0410-b5e6-96231b3b80d8
This default constructor is a bit weird. It left the range in an invalid
state. That might be reasonable so that you can construct a local
iterator range and assign to it based on some logic to compute the range
you want. If folks would like to support that use case, I can add it
back, but in 238-odd usages none have actually wanted to do this. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225592 91177308-0d34-0410-b5e6-96231b3b80d8
The bitcode reading interface used std::error_code to report an error to the
callers and it is the callers job to print diagnostics.
This is not ideal for error handling or diagnostic reporting:
* For error handling, all that the callers care about is 3 possibilities:
* It worked
* The bitcode file is corrupted/invalid.
* The file is not bitcode at all.
* For diagnostic, it is user friendly to include far more information
about the invalid case so the user can find out what is wrong with the
bitcode file. This comes up, for example, when a developer introduces a
bug while extending the format.
The compromise we had was to have a lot of error codes.
With this patch we use the DiagnosticHandler to communicate with the
human and std::error_code to communicate with the caller.
This allows us to have far fewer error codes and adds the infrastructure to
print better diagnostics. This is so because the diagnostics are printed when
he issue is found. The code that detected the problem in alive in the stack and
can pass down as much context as needed. As an example the patch updates
test/Bitcode/invalid.ll.
Using a DiagnosticHandler also moves the fatal/non-fatal error decision to the
caller. A simple one like llvm-dis can just use fatal errors. The gold plugin
needs a bit more complex treatment because of being passed non-bitcode files. An
hypothetical interactive tool would make all bitcode errors non-fatal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225562 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
One more attempt to fix UBSan reports: make sure DenseMapInfo::getEmptyKey()
and DenseMapInfo::getTombstoneKey() doesn't do any upcasts/downcasts to/from Value*.
Test Plan: check-llvm test suite with/without UBSan bootstrap
Reviewers: chandlerc, dexonsmith
Subscribers: llvm-commits, majnemer
Differential Revision: http://reviews.llvm.org/D6903
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225558 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r225498 (but leaves r225499, which was a worthy
cleanup).
My plan was to change `DEBUG_LOC` to store the `MDNode` directly rather
than its operands (patch was to go out this morning), but on reflection
it's not clear that it's strictly better. (I had missed that the
current code is unlikely to emit the `MDNode` at all.)
Conflicts:
lib/Bitcode/Reader/BitcodeReader.cpp (due to r225499)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225531 91177308-0d34-0410-b5e6-96231b3b80d8
This was used previously for metadata but is no longer needed there. Not
doing this simplifies ValueHandle and will make it easier to fix things
like AssertingVH's DenseMapInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225487 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MemDepPrinter handled volatile and unordered accesses without involving MemoryDependencyAnalysis. By making a slight tweak to the documented interface - which is respected by both callers - we can move this responsibility to MDA for the benefit of any future callers. This is basically just cleanup.
In the future, we may decide to extend MDA's non local dependency analysis to return useful results for ordered or volatile loads. I believe (but have not really checked in detail) that local dependency analyis does get useful results for ordered, but not volatile, loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225483 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MemoryDependenceAnalysis::getNonLocalPointerDependency was taking a list of properties about the instruction being queried. Since I'm about to need one more property to be passed down through the infrastructure - I need to know a query instruction is non-volatile in an inner helper - fix the interface once and for all.
I also added some assertions and behaviour clarifications around volatile and ordered field accesses. At the moment, this is mostly to document expected behaviour. The only non-standard instructions which can currently reach this are atomic, but unordered, loads and stores. Neither ordered or volatile accesses can reach here.
The call in GVN is protected by an isSimple check when it first considers the load. The calls in MemDepPrinter are protected by isUnordered checks. Both utilities also check isVolatile for loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225481 91177308-0d34-0410-b5e6-96231b3b80d8
Propagate whether `MDNode`s are 'distinct' through the other types of IR
(assembly and bitcode). This adds the `distinct` keyword to assembly.
Currently, no one actually calls `MDNode::getDistinct()`, so these nodes
only get created for:
- self-references, which are never uniqued, and
- nodes whose operands are replaced that hit a uniquing collision.
The concept of distinct nodes is still not quite first-class, since
distinct-ness doesn't yet survive across `MapMetadata()`.
Part of PR22111.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225474 91177308-0d34-0410-b5e6-96231b3b80d8
PEI tries to keep track of how much starting or ending a call sequence adjusts the stack pointer by, so that it can resolve frame-index references. Currently, it takes a very simplistic view of how SP adjustments are done - both FrameStartOpcode and FrameDestroyOpcode adjust it exactly by the amount written in its first argument.
This view is in fact incorrect for some targets (e.g. due to stack re-alignment, or because it may want to adjust the stack pointer in multiple steps). However, that doesn't cause breakage, because most targets (the only in-tree exception appears to be 32-bit ARM) rely on being able to simplify the call frame pseudo-instructions earlier, so this code is never hit.
Moving the computation into TargetInstrInfo allows targets to override the way the adjustment is computed if they need to have a non-zero SPAdj.
Differential Revision: http://reviews.llvm.org/D6863
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225437 91177308-0d34-0410-b5e6-96231b3b80d8
type (in addition to the memory type).
The *LoadExt* legalization handling used to only have one type, the
memory type. This forced users to assume that as long as the extload
for the memory type was declared legal, and the result type was legal,
the whole extload was legal.
However, this isn't always the case. For instance, on X86, with AVX,
this is legal:
v4i32 load, zext from v4i8
but this isn't:
v4i64 load, zext from v4i8
Whereas v4i64 is (arguably) legal, even without AVX2.
Note that the same thing was done a while ago for truncstores (r46140),
but I assume no one needed it yet for extloads, so here we go.
Calls to getLoadExtAction were changed to add the value type, found
manually in the surrounding code.
Calls to setLoadExtAction were mechanically changed, by wrapping the
call in a loop, to match previous behavior. The loop iterates over
the MVT subrange corresponding to the memory type (FP vectors, etc...).
I also pulled neighboring setTruncStoreActions into some of the loops;
those shouldn't make a difference, as the additional types are illegal.
(e.g., i128->i1 truncstores on PPC.)
No functional change intended.
Differential Revision: http://reviews.llvm.org/D6532
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225421 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have MVT::FIRST_VALUETYPE (r225362), we can provide a method
checking that the MVT is valid, that is, it's in
[FIRST_VALUETYPE, LAST_VALUETYPE[.
This commit also uses it in a few asserts, that would previously accept
invalid MVTs, such as the default constructed -1. In that case,
the code following those asserts would do an out-of-bounds array access.
Using MVT::isValid, those assertions fail as expected when passed
invalid MVTs.
It feels clunky to have such a validity checking function, but it's
at least better than the alternative of broken manual checks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225411 91177308-0d34-0410-b5e6-96231b3b80d8
Allow distinct `MDNode`s to be explicitly created. There's no way (yet)
of representing their distinctness in assembly/bitcode, however, so this
still isn't first-class.
Part of PR22111.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225406 91177308-0d34-0410-b5e6-96231b3b80d8
Add API to indicate whether an `MDNode` is distinct. A distinct node is
not stored in the MDNode uniquing tables, and will never be returned by
`MDNode::get()`.
Although distinct nodes are only currently created by uniquing
collisions (when operands change), PR22111 will allow these nodes to be
explicitly created.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225401 91177308-0d34-0410-b5e6-96231b3b80d8
`MDNode::replaceOperandWith()` changes all instances of metadata. Stop
using it when linking module flags, since (due to uniquing) the flag
values could be used by other metadata.
Instead, use new API `NamedMDNode::setOperand()` to update the reference
directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225397 91177308-0d34-0410-b5e6-96231b3b80d8
This change includes the most basic possible GCStrategy for a GC which is using the statepoint lowering code. At the moment, this GCStrategy doesn't really do much - aside from actually generate correct stackmaps that is - but I went ahead and added a few extra correctness checks as proof of concept. It's mostly here to provide documentation on how to do one, and to provide a point for various optimization legality hooks I'd like to add going forward. (For context, see the TODOs in InstCombine around gc.relocate.)
Most of the validation logic added here as proof of concept will soon move in to the Verifier. That move is dependent on http://reviews.llvm.org/D6811
There was discussion in the review thread about addrspace(1) being reserved for something. I'm going to follow up on a seperate llvmdev thread. If needed, I'll update all the code at once.
Note that I am deliberately not making a GCStrategy required to use gc.statepoints with this change. I want to give folks out of tree - including myself - a chance to migrate. In a week or two, I'll make having a GCStrategy be required for gc.statepoints. To this end, I added the gc tag to one of the test cases but not others.
Differential Revision: http://reviews.llvm.org/D6808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225365 91177308-0d34-0410-b5e6-96231b3b80d8
Many places reference MVT::LAST_VALUETYPE when iterating over all
valid MVTs, but they usually start with 0.
With FIRST_VALUETYPE, we can avoid explicit constants when we really
should be using MVT::SimpleValueType.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225362 91177308-0d34-0410-b5e6-96231b3b80d8
Used to iterate over previously added memory dependencies in
adjustChainDeps() and iterateChainSucc().
SDep::isCtrl() was previously used in these places, that also gave
anti and output edges. The code may be worse if these are followed,
because MisNeedChainEdge() will conservatively return true since a
non-memory instruction has no memory operands, and a false chain dep
will be added. It is also unnecessary since all memory accesses of
interest will be reached by memory dependencies, and there is a budget
limit for the number of edges traversed.
This problem was found on an out-of-tree target with enabled alias
analysis. No test case for an in-tree target has been found.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225351 91177308-0d34-0410-b5e6-96231b3b80d8
requiring and invalidating specific analyses. Also make their printed
names match their class names. Writing these out as prose really doesn't
make sense to me any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225346 91177308-0d34-0410-b5e6-96231b3b80d8
r221973 changed SmallVector::operator[] to use size_t instead of unsigned.
Before that, on 64bit platforms, when a large index (say -1) was passed,
truncating it to unsigned avoided an overflow when computing 'begin() + idx',
and failed the range checking assertion, as expected.
With r221973, idx isn't truncated, so the addition wraps to
'(char*)begin() - 1', and doesn't fire anymore when it should have done so.
This commit changes the comparison to instead compute 'end() - begin()'
(i.e., 'size()'), which avoids potentially overflowing additions, and
correctly triggers the assertion when values such as -1 are passed.
Note that the problem already existed before that revision, on platforms
where sizeof(size_t) == sizeof(unsigned).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225338 91177308-0d34-0410-b5e6-96231b3b80d8
We can't drop support for RAUW entirely in `MDNode`s, since it's
required for graph construction. This comment was from before I'd done
the math on that (out-of-tree), and never should have been committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225334 91177308-0d34-0410-b5e6-96231b3b80d8
passes too many time.
I think this is actually the issue that someone raised with me at the
developer's meeting and in an email, but that we never really got to the
bottom of. Having all the testing utilities made it much easier to dig
down and uncover the core issue.
When a pass manager is running many passes over a single function, we
need it to invalidate the analyses between each run so that they can be
re-computed as needed. We also need to track the intersection of
preserved higher-level analyses across all the passes that we run (for
example, if there is one module analysis which all the function analyses
preserve, we want to track that and propagate it). Unfortunately, this
interacted poorly with any enclosing pass adaptor between two IR units.
It would see the intersection of preserved analyses, and need to
invalidate any other analyses, but some of the un-preserved analyses
might have already been invalidated *and recomputed*! We would fail to
propagate the fact that the analysis had already been invalidated.
The solution to this struck me as really strange at first, but the more
I thought about it, the more natural it seemed. After a nice discussion
with Duncan about it on IRC, it seemed even nicer. The idea is that
invalidating an analysis *causes* it to be preserved! Preserving the
lack of result is trivial. If it is recomputed, great. Until something
*else* invalidates it again, we're good.
The consequence of this is that the invalidate methods on the analysis
manager which operate over many passes now consume their
PreservedAnalyses object, update it to "preserve" every analysis pass to
which it delivers an invalidation (regardless of whether the pass
chooses to be removed, or handles the invalidation itself by updating
itself). Then we return this augmented set from the invalidate routine,
letting the pass manager take the result and use the intersection of
*that* across each pass run to compute the final preserved set. This
accounts for all the places where the early invalidation of an analysis
has already "preserved" it for a future run.
I've beefed up the testing and adjusted the assertions to show that we
no longer repeatedly invalidate or compute the analyses across nested
pass managers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225333 91177308-0d34-0410-b5e6-96231b3b80d8
WillNotOverflowUnsignedAdd's smarts will live in ValueTracking as
computeOverflowForUnsignedAdd. It now returns a tri-state result:
never overflows, always overflows and sometimes overflows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225329 91177308-0d34-0410-b5e6-96231b3b80d8
This is affecting the behavior of some ObjC++ / AArch64 test cases on Darwin.
Reverting to get the bots green while I track down the source of the changed
behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225311 91177308-0d34-0410-b5e6-96231b3b80d8
The goal is to allows MachineFunctionInfo to override this create
function to customize the creation.
No change intended in existing backend in this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225292 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used for AMD GPUs with the Graphics Core Next architecture,
which are currently using by the r600 triple.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225276 91177308-0d34-0410-b5e6-96231b3b80d8
Use this to test that path of invalidation. This test actually shows
redundant invalidation here that is really bad. I'm going to work on
fixing that next, but wanted to commit the test harness now that its all
working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225257 91177308-0d34-0410-b5e6-96231b3b80d8
a specific analysis result.
This is quite handy to test things, and will also likely be very useful
for debugging issues. You could narrow down pass validation failures by
walking these invalidate pass runs up and down the pass pipeline, etc.
I've added support to the pass pipeline parsing to be able to create one
of these for any analysis pass desired.
Just adding this class uncovered one latent bug where the
AnalysisManager CRTP base class had a hard-coded Module type rather than
using IRUnitT.
I've also added tests for invalidation and caching of analyses in
a basic way across all the pass managers. These in turn uncovered two
more bugs where we failed to correctly invalidate an analysis -- its
results were invalidated but the key for re-running the pass was never
cleared and so it was never re-run. Quite nasty. I'm very glad to debug
this here rather than with a full system.
Also, yes, the naming here is horrid. I'm going to update some of the
names to be slightly less awful shortly. But really, I've no "good"
ideas for naming. I'll be satisfied if I can get it to "not bad".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225246 91177308-0d34-0410-b5e6-96231b3b80d8
is a no-op other than requiring some analysis results be available.
This can be used in real pass pipelines to force the usually lazy
analysis running to eagerly compute something at a specific point, and
it can be used to test the pass manager infrastructure (my primary use
at the moment).
I've also added bit of pipeline parsing magic to support generating
these directly from the opt command so that you can directly use these
when debugging your analysis. The syntax is:
require<analysis-name>
This can be used at any level of the pass manager. For example:
cgscc(function(require<my-analysis>,no-op-function))
This would produce a no-op function pass requiring my-analysis, followed
by a fully no-op function pass, both of these in a function pass manager
which is nested inside of a bottom-up CGSCC pass manager which is in the
top-level (implicit) module pass manager.
I have zero attachment to the particular syntax I'm using here. Consider
it a straw man for use while I'm testing and fleshing things out.
Suggestions for better syntax welcome, and I'll update everything based
on any consensus that develops.
I've used this new functionality to more directly test the analysis
printing rather than relying on the cgscc pass manager running an
analysis for me. This is still minimally tested because I need to have
analyses to run first! ;] That patch is next, but wanted to keep this
one separate for easier review and discussion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225236 91177308-0d34-0410-b5e6-96231b3b80d8
dsymutil would like to use all the AsmPrinter/MCStreamer infrastructure
to stream out the DWARF. In order to do so, it will reuse the DIE object
and so this header needs to be public.
The interface exposed here has some corners that cannot be used without a
DwarfDebug object, but clients that want to stream Dwarf can just avoid
these.
Differential Revision: http://reviews.llvm.org/D6695
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225208 91177308-0d34-0410-b5e6-96231b3b80d8
when all are being preserved.
We want to short-circuit this for a couple of reasons. One, I don't
really want passes to grow a dependency on actually receiving their
invalidate call when they've been preserved. I'm thinking about removing
this entirely. But more importantly, preserving everything is likely to
be the common case in a lot of scenarios, and it would be really good to
bypass all of the invalidation and preservation machinery there.
Avoiding calling N opaque functions to try to invalidate things that are
by definition still valid seems important. =]
This wasn't really inpsired by much other than seeing the spam in the
logging for analyses, but it seems better ot get it checked in rather
than forgetting about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225163 91177308-0d34-0410-b5e6-96231b3b80d8
manager.
This starts to allow us to test analyses more easily, but it's really
only the beginning. Some of the code here is still untestable without
manual changes to create analysis passes, but I wanted to factor it into
a small of chunks as possible.
Next up in order to be able to test things are, in no particular order:
- No-op analyses passes so we don't have to use real ones to exercise
the pass maneger itself.
- Automatic way of generating dummy passes that require an analysis be
run, including a variant that calls a 'print' method on a pass to make
it even easier to print out the results of an analysis.
- Dummy passes that invalidate all analyses for their IR unit so we can
test invalidation and re-runs.
- Automatic way to print each analysis pass as it is re-run.
- Automatic but optional verification of analysis passes everywhere
possible.
I'm not claiming I'll get to all of these immediately, but that's what
is in the pipeline at some stage. I'm fleshing out exactly what I need
and what to prioritize by working on converting analyses and then trying
to test the conversion. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225162 91177308-0d34-0410-b5e6-96231b3b80d8
