gvn (this is just a skeleton so far). This will ultimately be used
to fix a nasty miscompilation with GVN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90518 91177308-0d34-0410-b5e6-96231b3b80d8
where it is not available. It's unclear how to get this inserted
computation into GVN's scalar availability sets, Owen, help? :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89997 91177308-0d34-0410-b5e6-96231b3b80d8
The hasNoModRefInfoForCalls isn't worth it as a filter because
basicaa provides m/r info and everything chains to it, so remove
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89599 91177308-0d34-0410-b5e6-96231b3b80d8
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89484 91177308-0d34-0410-b5e6-96231b3b80d8
if it is not ultimately captured. Teach BasicAliasAnalysis that a
local object address which does not escape and is never stored does
not alias with a value resulting from a load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89398 91177308-0d34-0410-b5e6-96231b3b80d8
cannot be folded into target cmp instruction.
- Avoid a phase ordering issue where early cmp optimization would prevent the
later count-to-zero optimization.
- Add missing checks which could cause LSR to reuse stride that does not have
users.
- Fix a bug in count-to-zero optimization code which failed to find the pre-inc
iv's phi node.
- Remove, tighten, loosen some incorrect checks disable valid transformations.
- Quite a bit of code clean up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86969 91177308-0d34-0410-b5e6-96231b3b80d8
This allows StringRef to skip controversial if(str) check in constructor.
Buildbots, wait for corresponding clang and llvm-gcc FE check-ins!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86914 91177308-0d34-0410-b5e6-96231b3b80d8
start using them in a trivial way when -enable-jump-threading-lvi
is passed. enable-jump-threading-lvi will be my playground for
awhile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86789 91177308-0d34-0410-b5e6-96231b3b80d8
except that the result may not be a constant. Switch jump threading to
use it so that it gets things like (X & 0) -> 0, which occur when phi preds
are deleted and the remaining phi pred was a zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86637 91177308-0d34-0410-b5e6-96231b3b80d8
This patch forbids implicit conversion of DenseMap::const_iterator to
DenseMap::iterator which was possible because DenseMapIterator inherited
(publicly) from DenseMapConstIterator. Conversion the other way around is now
allowed as one may expect.
The template DenseMapConstIterator is removed and the template parameter
IsConst which specifies whether the iterator is constant is added to
DenseMapIterator.
Actually IsConst parameter is not necessary since the constness can be
determined from KeyT but this is not relevant to the fix and can be addressed
later.
Patch by Victor Zverovich!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86636 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify[IF]Cmp pieces. Add some predicates to CmpInst to
determine whether a predicate is fp or int.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86624 91177308-0d34-0410-b5e6-96231b3b80d8
takes decimated instructions and applies identities to them. This
is pretty minimal at this point, but I plan to pull some instcombine
logic out into these and similar routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86613 91177308-0d34-0410-b5e6-96231b3b80d8
Here is the original commit message:
This commit updates malloc optimizations to operate on malloc calls that have constant int size arguments.
Update CreateMalloc so that its callers specify the size to allocate:
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86311 91177308-0d34-0410-b5e6-96231b3b80d8
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86077 91177308-0d34-0410-b5e6-96231b3b80d8
ArraySize * ElementSize
ElementSize * ArraySize
ArraySize << log2(ElementSize)
ElementSize << log2(ArraySize)
Refactor isArrayMallocHelper and delete isSafeToGetMallocArraySize, so that there is only 1 copy of the malloc array determining logic.
Update users of getMallocArraySize() to not bother calling isArrayMalloc() as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85421 91177308-0d34-0410-b5e6-96231b3b80d8
Remove LowerAllocations pass.
Update some more passes to treate free calls just like they were treating FreeInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85176 91177308-0d34-0410-b5e6-96231b3b80d8
used elsewhere - an exit block is a block outside the loop branched to
from within the loop. An exiting block is a block inside the loop that
branches out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85019 91177308-0d34-0410-b5e6-96231b3b80d8
Update all analysis passes and transforms to treat free calls just like FreeInst.
Remove RaiseAllocations and all its tests since FreeInst no longer needs to be raised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84987 91177308-0d34-0410-b5e6-96231b3b80d8
Analysis/ConstantFolding.cpp. This doesn't change the behavior of
instcombine but makes other clients of ConstantFoldInstruction
able to handle loads. This was partially extracted from Eli's patch
in PR3152.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84836 91177308-0d34-0410-b5e6-96231b3b80d8
identifying the malloc as a non-array malloc. This broke GlobalOpt's optimization of stores of mallocs
to global variables.
The fix is to classify malloc's into 3 categories:
1. non-array mallocs
2. array mallocs whose array size can be determined
3. mallocs that cannot be determined to be of type 1 or 2 and cannot be optimized
getMallocArraySize() returns NULL for category 3, and all users of this function must avoid their
malloc optimization if this function returns NULL.
Eventually, currently unexpected codegen for computing the malloc's size argument will be supported in
isArrayMalloc() and getMallocArraySize(), extending malloc optimizations to those examples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84199 91177308-0d34-0410-b5e6-96231b3b80d8
"LoopVR's logic was copied into ScalarEvolution::getUnsignedRange and
::getSignedRange. Please delete LoopVR."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83531 91177308-0d34-0410-b5e6-96231b3b80d8
question, can we get rid of the BasicBlock versions of all inserters
and use Head == 0 to indicate the old case when GetInsertBlock == 0?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83216 91177308-0d34-0410-b5e6-96231b3b80d8
information. This allows arbitrary code involving DW_OP_plus_uconst
and DW_OP_deref. The scheme allows for easy extention to include,
any, or all of the DW_OP_ opcodes. I thought about just exposing all
of them, but, wasn't sure if people wanted the dwarf opcodes exposed
in the api. Is that a layering violation?
With this scheme, the entire existing block scheme used by llvm-gcc
can be switched over to the new scheme. I think that would be
cleaner, as then the compiler specific bits are not present in llvm
proper. Before the old code can be yanked however, similar code in
clang would have to be removed.
Next up, more testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83120 91177308-0d34-0410-b5e6-96231b3b80d8
the PassManager code into a regular verifyAnalysis method.
Also, reorganize loop verification. Make the LoopPass infrastructure
call verifyLoop as needed instead of having LoopInfo::verifyAnalysis
check every loop in the function after each looop pass. Add a new
command-line argument, -verify-loop-info, to enable the expensive
full checking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82952 91177308-0d34-0410-b5e6-96231b3b80d8
