in the case where a loop exit value cannot be computed, instead of only in
some cases while using SCEVCouldNotCompute in others. This simplifies
getSCEVAtScope's callers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72375 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72093 91177308-0d34-0410-b5e6-96231b3b80d8
getNoopOrSignExtend, and getTruncateOrNoop. These are similar
to getTruncateOrZeroExtend etc., except that they assert that
the conversion is either not widening or narrowing, as
appropriate. These will be used in some upcoming fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71632 91177308-0d34-0410-b5e6-96231b3b80d8
which are not analyzed with SCEV techniques, which can require
brute-forcing through a large number of instructions. This
fixes a massive compile-time issue on 400.perlbench (in
particular, the loop in MD5Transform).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71259 91177308-0d34-0410-b5e6-96231b3b80d8
CallbackVH, with fixes. allUsesReplacedWith need to
walk the def-use chains and invalidate all users of a
value that is replaced. SCEVs of users need to be
recalcualted even if the new value is equivalent. Also,
make forgetLoopPHIs walk def-use chains, since any
SCEV that depends on a PHI should be recalculated when
more information about that PHI becomes available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70927 91177308-0d34-0410-b5e6-96231b3b80d8
makes ScalarEvolution::deleteValueFromRecords, and it's code that
subtly needed to be called before ReplaceAllUsesWith, unnecessary.
It also makes ValueDeletionListener unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70645 91177308-0d34-0410-b5e6-96231b3b80d8
it also forget any SCEVs associated with loop-header PHIs in the loop,
as they may be dependent on trip count information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70633 91177308-0d34-0410-b5e6-96231b3b80d8
compute an upper-bound value for the trip count, in addition to
the actual trip count. Use this to allow getZeroExtendExpr and
getSignExtendExpr to fold casts in more cases.
This may eventually morph into a more general value-range
analysis capability; there are certainly plenty of places where
more complete value-range information would allow more folding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70509 91177308-0d34-0410-b5e6-96231b3b80d8
have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69258 91177308-0d34-0410-b5e6-96231b3b80d8
to more accurately describe what it does. Expand its doxygen comment
to describe what the backedge-taken count is and how it differs
from the actual iteration count of the loop. Adjust names and
comments in associated code accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65382 91177308-0d34-0410-b5e6-96231b3b80d8
trip count value when the original loop iteration condition is
signed and the canonical induction variable won't undergo signed
overflow. This isn't required for correctness; it just preserves
more information about original loop iteration values.
Add a getTruncateOrSignExtend method to ScalarEvolution,
following getTruncateOrZeroExtend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64918 91177308-0d34-0410-b5e6-96231b3b80d8
modified in a way that may effect the trip count calculation. Change
IndVars to use this method when it rewrites pointer or floating-point
induction variables instead of using a doInitialization method to
sneak these changes in before ScalarEvolution has a chance to see
the loop. This eliminates the need for LoopPass to depend on
ScalarEvolution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64810 91177308-0d34-0410-b5e6-96231b3b80d8
loop induction on LP64 targets. When the induction variable is
used in addressing, IndVars now is usually able to inserst a
64-bit induction variable and eliminates the sign-extending cast.
This is also useful for code using C "short" types for
induction variables on targets with 32-bit addressing.
Inserting a wider induction variable is easy; the tricky part is
determining when trunc(sext(i)) expressions are no-ops. This
requires range analysis of the loop trip count. A common case is
when the original loop iteration starts at 0 and exits when the
induction variable is signed-less-than a fixed value; this case
is now handled.
This replaces IndVarSimplify's OptimizeCanonicalIVType. It was
doing the same optimization, but it was limited to loops with
constant trip counts, because it was running after the loop
rewrite, and the information about the original induction
variable is lost by that point.
Rename ScalarEvolution's executesAtLeastOnce to
isLoopGuardedByCond, generalize it to be able to test for
ICMP_NE conditions, and move it to be a public function so that
IndVars can use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64407 91177308-0d34-0410-b5e6-96231b3b80d8
with code that was expecting different bit widths for different values.
Make getTruncateOrZeroExtend a method on ScalarEvolution, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52248 91177308-0d34-0410-b5e6-96231b3b80d8
Parse reversed smax and umax as smin and umin and express them with negative
or binary-not SCEVs (which are really just subtract under the hood).
Parse 'xor %x, -1' as (-1 - %x).
Remove dead code (ConstantInt::get always returns a ConstantInt).
Don't use getIntegerSCEV(-1, Ty). The first value is an int, then it gets
passed into a uint64_t. Instead, create the -1 directly from
ConstantInt::getAllOnesValue().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47360 91177308-0d34-0410-b5e6-96231b3b80d8
arbitrary iteration.
The patch:
1) changes SCEVSDivExpr into SCEVUDivExpr,
2) replaces PartialFact() function with BinomialCoefficient(); the
computations (essentially, the division) in BinomialCoefficient() are
performed with the apprioprate bitwidth necessary to avoid overflow;
unsigned division is used instead of the signed one.
Computations in BinomialCoefficient() require support from the code
generator for APInts. Currently, we use a hack rounding up the
neccessary bitwidth to the nearest power of 2. The hack is easy to turn
off in future.
One remaining issue: we assume the divisor of the binomial coefficient
formula can be computed accurately using 16 bits. It means we can handle
AddRecs of length up to 9. In future, we should use APInts to evaluate
the divisor.
Thanks to Nicholas for cooperation!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46955 91177308-0d34-0410-b5e6-96231b3b80d8
is disabled in the sense that it will refuse to create one from a UDiv
instruction, until the code is better tested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44163 91177308-0d34-0410-b5e6-96231b3b80d8
deleteValueFromRecords and loosen the types to all it to accept
Value* instead of just Instruction*, since this is what
ScalarEvolution uses internally anyway. This allows more flexibility
for future uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37657 91177308-0d34-0410-b5e6-96231b3b80d8
Due to darwin gcc bug, one version of darwin linker coalesces
static const int, which defauts PassID based pass identification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36652 91177308-0d34-0410-b5e6-96231b3b80d8
rework the hacks that had us passing OStream in. We pass in std::ostream*
instead, check for null, and then dispatch to the correct print() method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32636 91177308-0d34-0410-b5e6-96231b3b80d8
Make only one print method to avoid overloaded virtual warnings when \
compiled with -Woverloaded-virtual
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18589 91177308-0d34-0410-b5e6-96231b3b80d8
