Commit Graph

33 Commits

Author SHA1 Message Date
Chris Lattner
ab21db79ef rename indbr -> indirectbr to appease the residents of #llvm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85351 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-28 00:19:10 +00:00
Chris Lattner
f9be95f867 add enough support for indirect branch for the feature test to pass
(assembler,asmprinter, bc reader+writer) and document it.  Codegen
currently aborts on it.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85274 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-27 19:13:16 +00:00
Victor Hernandez
046e78ce55 Remove FreeInst.
Remove LowerAllocations pass.
Update some more passes to treate free calls just like they were treating FreeInst.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85176 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-26 23:43:48 +00:00
Victor Hernandez
a276c603b8 Remove MallocInst from LLVM Instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84299 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-17 01:18:07 +00:00
Evan Cheng
fb2e752e41 Enhance EmitInstrWithCustomInserter() so target can specify CFG changes that sdisel will use to properly complete phi nodes.
Not functionality change yet.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82273 91177308-0d34-0410-b5e6-96231b3b80d8
2009-09-18 21:02:19 +00:00
Owen Anderson
e50ed30282 Rename MVT to EVT, in preparation for splitting SimpleValueType out into its own struct type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78610 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-10 22:56:29 +00:00
Dan Gohman
98ca4f2a32 Major calling convention code refactoring.
Instead of awkwardly encoding calling-convention information with ISD::CALL,
ISD::FORMAL_ARGUMENTS, ISD::RET, and ISD::ARG_FLAGS nodes, TargetLowering
provides three virtual functions for targets to override:
LowerFormalArguments, LowerCall, and LowerRet, which replace the custom
lowering done on the special nodes. They provide the same information, but
in a more immediately usable format.

This also reworks much of the target-independent tail call logic. The
decision of whether or not to perform a tail call is now cleanly split
between target-independent portions, and the target dependent portion
in IsEligibleForTailCallOptimization.

This also synchronizes all in-tree targets, to help enable future
refactoring and feature work.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78142 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-05 01:29:28 +00:00
Torok Edwin
c23197a26f llvm_unreachable->llvm_unreachable(0), LLVM_UNREACHABLE->llvm_unreachable.
This adds location info for all llvm_unreachable calls (which is a macro now) in
!NDEBUG builds.
In NDEBUG builds location info and the message is off (it only prints
"UREACHABLE executed").


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75640 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-14 16:55:14 +00:00
Owen Anderson
0a5372ed3e Begin the painful process of tearing apart the rat'ss nest that is Constants.cpp and ConstantFold.cpp.
This involves temporarily hard wiring some parts to use the global context.  This isn't ideal, but it's
the only way I could figure out to make this process vaguely incremental.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75445 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-13 04:09:18 +00:00
Torok Edwin
c25e7581b9 assert(0) -> LLVM_UNREACHABLE.
Make llvm_unreachable take an optional string, thus moving the cerr<< out of
line.
LLVM_UNREACHABLE is now a simple wrapper that makes the message go away for
NDEBUG builds.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75379 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-11 20:10:48 +00:00
Nick Lewycky
7f6aa2b162 Remove the vicmp and vfcmp instructions. Because we never had a release with
these instructions, no autoupgrade or backwards compatibility support is
provided.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74991 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-08 03:04:38 +00:00
Dan Gohman
ae3a0be92e Split the Add, Sub, and Mul instruction opcodes into separate
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.

For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.

This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-04 22:49:04 +00:00
Bill Wendling
df7d5d3170 Temporarily revert r72191. It was causing an assert during llvm-gcc
bootstrapping.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72200 91177308-0d34-0410-b5e6-96231b3b80d8
2009-05-21 00:04:55 +00:00
Argyrios Kyrtzidis
a3437647dc Introduce DebugScope which gets embedded into the machine instructions' DebugLoc.
DebugScope refers to a debug region, function or block.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72191 91177308-0d34-0410-b5e6-96231b3b80d8
2009-05-20 22:57:17 +00:00
Bill Wendling
98a366d547 Instead of passing in an unsigned value for the optimization level, use an enum,
which better identifies what the optimization is doing. And is more flexible for
future uses.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70440 91177308-0d34-0410-b5e6-96231b3b80d8
2009-04-29 23:29:43 +00:00
Bill Wendling
be8cc2a3de Second attempt:
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.

Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
2009-04-29 00:15:41 +00:00
Bill Wendling
c69d56f115 r70270 isn't ready yet. Back this out. Sorry for the noise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70275 91177308-0d34-0410-b5e6-96231b3b80d8
2009-04-28 01:04:53 +00:00
Bill Wendling
2e9d5f912a Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.

Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
2009-04-28 00:21:31 +00:00
Dan Gohman
ad62f53795 Factor out a bit of code that appears in several places into a
utility function.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69937 91177308-0d34-0410-b5e6-96231b3b80d8
2009-04-23 23:13:24 +00:00
Devang Patel
390f3ace34 If FastISel is run and it has known DebugLoc then use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69253 91177308-0d34-0410-b5e6-96231b3b80d8
2009-04-16 01:33:10 +00:00
Dan Gohman
84d08db733 Initialize LiveOutInfo's APInt members to zero, as APInt's
default constructor produces an uninitialized APInt.
This fixes PR3896.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67879 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-27 23:51:02 +00:00
Bill Wendling
dfdacee2ab Generate these labels when we're in "fast" mode, not simply when we're no in
"optimize-for-size" mode.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65064 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-19 21:12:54 +00:00
Bill Wendling
6a8a0d74cb Pass in something sensible for the debug location information when creating the
initial PHI nodes of the machine function.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63598 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-03 02:20:52 +00:00
Bill Wendling
0eb96fd94b Alphabetize includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63591 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-03 01:32:22 +00:00
Dale Johannesen
66978ee977 Move CurDebugLoc into SelectionDAGLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63468 91177308-0d34-0410-b5e6-96231b3b80d8
2009-01-31 02:22:37 +00:00
Anton Korobeynikov
2321858c8c Initial checkin of APInt'ififcation of switch lowering
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61395 91177308-0d34-0410-b5e6-96231b3b80d8
2008-12-23 22:25:27 +00:00
Bill Wendling
74c3765291 Add sub/mul overflow intrinsics. This currently doesn't have a
target-independent way of determining overflow on multiplication. It's very
tricky. Patch by Zoltan Varga!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60800 91177308-0d34-0410-b5e6-96231b3b80d8
2008-12-09 22:08:41 +00:00
Dan Gohman
c227734855 Factor out the code for mapping LLVM IR condition opcodes to
ISD condition opcodes into helper functions.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@57726 91177308-0d34-0410-b5e6-96231b3b80d8
2008-10-17 21:16:08 +00:00
Dale Johannesen
8e3455ba17 Remove SelectionDag early allocation of registers
for earlyclobbers.  Teach Local RA about earlyclobber,
and add some tests for it.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56592 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-24 23:13:09 +00:00
Bill Wendling
aeb5c7b353 Implement "visitPow". This is mainly used to see if we have a pow() call of this
form:

          powf(10.0f, x);

If this is the case, and also we want limited precision floating-point
calculations, then lower to do the limited-precision stuff.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56035 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-10 00:20:20 +00:00
Dale Johannesen
59e577f73c Add hooks for other intrinsics to get low-precision expansions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55845 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-05 18:38:42 +00:00
Dale Johannesen
601d3c0145 Add -flimit-float-precision to enable some faster,
but less accurate (non-IEEE) code sequences for
certain math library functions.  Add the first of
several such expansions.  Don't worry, if you don't
turn it on it won't affect you.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55823 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-05 01:48:15 +00:00
Dan Gohman
f0cbcd4880 Split the SelectionDAG-building code, including the FunctionLoweringInfo
and SelectionDAGLowering classes, out of SelectionDAGISel.cpp and put
it in a separate file, SelectionDAGBuild.cpp.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55701 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-03 16:12:24 +00:00