According to the AArch64 ELF specification (4.6.8), it's the
assembler's responsibility to make sure the shift amount is correct in
relocated MOVZ/MOVK instructions.
This wasn't being obeyed by either the MCJIT CodeGen or RuntimeDyldELF
(which happened to work out well for JIT tests). This commit should
make us compliant in this area.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185360 91177308-0d34-0410-b5e6-96231b3b80d8
This is a resubmit of r182877, which was reverted because it broken
MCJIT tests on ARM. The patch leaves MCJIT on ARM as it was before: only
enabled for iOS. I've CC'ed people from the original review and revert.
FastISel was only enabled for iOS ARM and Thumb2, this patch enables it
for ARM (not Thumb2) on Linux and NaCl, but not MCJIT.
Thumb2 support needs a bit more work, mainly around register class
restrictions.
The patch punts to SelectionDAG when doing TLS relocation on non-Darwin
targets. I will fix this and other FastISel-to-SelectionDAG failures in
a separate patch.
The patch also forces FastISel to retain frame pointers: iOS always
keeps them for backtracking (so emitted code won't change because of
this), but Linux was getting much worse code that was incorrect when
using big frames (such as test-suite's lencod). I'll also fix this in a
later patch, it will probably require a peephole so that FastISel
doesn't rematerialize frame pointers back-to-back.
The test changes are straightforward, similar to:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130513/174279.html
They also add a vararg test that got dropped in that change.
I ran all of lnt test-suite on A15 hardware with --optimize-option=-O0
and all the tests pass. All the tests also pass on x86 make check-all. I
also re-ran the check-all tests that failed on ARM, and they all seem to
pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183966 91177308-0d34-0410-b5e6-96231b3b80d8
In ELF (as in MachO), not all relocations point to symbols. Represent this
properly by using a symbol_iterator instead of a SymbolRef. Update llvm-readobj
ELF's dumper to handle relocatios without symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183284 91177308-0d34-0410-b5e6-96231b3b80d8
This was missing from r182908. I didn't noticed it at the time because the MCJIT tests were
disabled when building with cmake on ppc64 (which I fixed in r183143).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183147 91177308-0d34-0410-b5e6-96231b3b80d8
For COFF and MachO, sections semantically have relocations that apply to them.
That is not the case on ELF.
In relocatable objects (.o), a section with relocations in ELF has offsets to
another section where the relocations should be applied.
In dynamic objects and executables, relocations don't have an offset, they have
a virtual address. The section sh_info may or may not point to another section,
but that is not actually used for resolving the relocations.
This patch exposes that in the ObjectFile API. It has the following advantages:
* Most (all?) clients can handle this more efficiently. They will normally walk
all relocations, so doing an effort to iterate in a particular order doesn't
save time.
* llvm-readobj now prints relocations in the same way the native readelf does.
* probably most important, relocations that don't point to any section are now
visible. This is the case of relocations in the rela.dyn section. See the
updated relocation-executable.test for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182908 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would read-modify-write the target bits when processing
relocations for the MCJIT. This had the problem that when relocations
were processed multiple times for the same object file (as they can
be), the result is not idempotent and the values became corrupted.
The solution to this is to take any bits used in the destination from
the pristine object file as LLVM emitted it.
This should fix PR16013 and remote MCJIT on ARM ELF targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182800 91177308-0d34-0410-b5e6-96231b3b80d8
the C API to provide their own way of allocating JIT memory (both code
and data) and finalizing memory permissions (page protections, cache
flush).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182448 91177308-0d34-0410-b5e6-96231b3b80d8
libExecutionEngine. Move method implementations that aren't specific to
allocation out of SectionMemoryManager and into RTDyldMemoryManager.
This is in preparation for exposing RTDyldMemoryManager through the C
API.
This is a fixed version of r182407 and r182411. That first revision
broke builds because I forgot to move the conditional includes of
various POSIX headers from SectionMemoryManager into
RTDyldMemoryManager. Those includes are necessary because of how
getPointerToNamedFunction works around the glibc libc_nonshared.a thing.
The latter revision still broke things because I forgot to include
llvm/Config/config.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182418 91177308-0d34-0410-b5e6-96231b3b80d8
libExecutionEngine. Move method implementations that aren't specific to
allocation out of SectionMemoryManager and into RTDyldMemoryManager.
This is in preparation for exposing RTDyldMemoryManager through the C
API.
This is a fixed version of r182407. That revision broke builds because I
forgot to move the conditional includes of various POSIX headers from
SectionMemoryManager into RTDyldMemoryManager. Those includes are
necessary because of how getPointerToNamedFunction works around the
glibc libc_nonshared.a thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182411 91177308-0d34-0410-b5e6-96231b3b80d8
the C API to provide their own way of allocating JIT memory (both code
and data) and finalizing memory permissions (page protections, cache
flush).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182408 91177308-0d34-0410-b5e6-96231b3b80d8
libExecutionEngine. Move method implementations that aren't specific to
allocation out of SectionMemoryManager and into RTDyldMemoryManager.
This is in preparation for exposing RTDyldMemoryManager through the C
API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182407 91177308-0d34-0410-b5e6-96231b3b80d8
AArch64 ELF uses .rela relocations so there's no need to actually make
use of the bits we're setting in the destination However, we should
make sure all bits are cleared properly since multiple runs of
resolveRelocations are possible and these could combine to produce
invalid results if stale versions remain in the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182214 91177308-0d34-0410-b5e6-96231b3b80d8
the JIT object (including XFAIL an ARM test that now needs fixing). Also renames
internal function for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182085 91177308-0d34-0410-b5e6-96231b3b80d8
EngineBuilder interface required a JITMemoryManager even if it was being used
to construct an MCJIT. But the MCJIT actually wants a RTDyldMemoryManager.
Consequently, the SectionMemoryManager, which is meant for MCJIT, derived
from the JITMemoryManager and then stubbed out a bunch of JITMemoryManager
methods that weren't relevant to the MCJIT.
This patch fixes the situation: it teaches the EngineBuilder that
RTDyldMemoryManager is a supertype of JITMemoryManager, and that it's
appropriate to pass a RTDyldMemoryManager instead of a JITMemoryManager if
we're using the MCJIT. This allows us to remove the stub methods from
SectionMemoryManager, and make SectionMemoryManager a direct subtype of
RTDyldMemoryManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181820 91177308-0d34-0410-b5e6-96231b3b80d8
It was only implemented for ELF where it collected the Addend, so this
patch also renames it to getRelocationAddend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181502 91177308-0d34-0410-b5e6-96231b3b80d8
This gets exception handling working on ELF and Macho (x86-64 at least).
Other than the EH frame registration, this patch also implements support
for GOT relocations which are used to locate the personality function on
MachO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181167 91177308-0d34-0410-b5e6-96231b3b80d8
This is about the simplest relocation, but surprisingly rare in actual
code.
It occurs in (for example) the MCJIT test test-ptr-reloc.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181134 91177308-0d34-0410-b5e6-96231b3b80d8
As with global accesses, external functions could exist anywhere in
memory. Therefore the stub must create a complete 64-bit address. This
patch implements the fragment as (roughly):
movz x16, #:abs_g3:somefunc
movk x16, #:abs_g2_nc:somefunc
movk x16, #:abs_g1_nc:somefunc
movk x16, #:abs_g0_nc:somefunc
br x16
In principle we could save 4 bytes by using a literal-load instead,
but it is unclear that would be more efficient and can only be tested
when real hardware is readily available.
This allows (for example) the MCJIT test 2003-05-07-ArgumentTest to
pass on AArch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181133 91177308-0d34-0410-b5e6-96231b3b80d8
The large memory model (default and main viable for JIT) emits
addresses in need of relocation as
movz x0, #:abs_g3:somewhere
movk x0, #:abs_g2_nc:somewhere
movk x0, #:abs_g1_nc:somewhere
movk x0, #:abs_g0_nc:somewhere
To support this we must implement those four relocations in the
dynamic loader.
This allows (for example) the test-global.ll MCJIT test to pass on
AArch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181132 91177308-0d34-0410-b5e6-96231b3b80d8
R_AARCH64_PCREL32 is present in even trivial .eh_frame sections and so
is required to compile any function without the "nounwind" attribute.
This change implements very basic infrastructure in the RuntimeDyldELF
file and allows (for example) the test-shift.ll MCJIT test to pass
on AArch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181131 91177308-0d34-0410-b5e6-96231b3b80d8
Another step towards reinstating the SystemZ backend. I'll commit
the configure changes separately (TARGET_HAS_JIT etc.), then commit
a patch to enable the MCJIT tests on SystemZ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181015 91177308-0d34-0410-b5e6-96231b3b80d8
CodeModel: It's now possible to create an MCJIT instance with any CodeModel you like. Previously it was only possible to
create an MCJIT that used CodeModel::JITDefault.
EnableFastISel: It's now possible to turn on the fast instruction selector.
The CodeModel option required some trickery. The problem is that previously, we were ensuring future binary compatibility in
the MCJITCompilerOptions by mandating that the user bzero's the options struct and passes the sizeof() that he saw; the
bindings then bzero the remaining bits. This works great but assumes that the bitwise zero equivalent of any field is a
sensible default value.
But this is not the case for LLVMCodeModel, or its internal equivalent, llvm::CodeModel::Model. In both of those, the default
for a JIT is CodeModel::JITDefault (or LLVMCodeModelJITDefault), which is not bitwise zero.
Hence this change introduces LLVMInitializeMCJITCompilerOptions(), which will initialize the user's options struct with
defaults. The user will use this in the same way that they would have previously used memset() or bzero(). MCJITCAPITest.cpp
illustrates the change, as does the comment in ExecutionEngine.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180893 91177308-0d34-0410-b5e6-96231b3b80d8
the things, and renames it to CBindingWrapping.h. I also moved
CBindingWrapping.h into Support/.
This new file just contains the macros for defining different wrap/unwrap
methods.
The calls to those macros, as well as any custom wrap/unwrap definitions
(like for array of Values for example), are put into corresponding C++
headers.
Doing this required some #include surgery, since some .cpp files relied
on the fact that including Wrap.h implicitly caused the inclusion of a
bunch of other things.
This also now means that the C++ headers will include their corresponding
C API headers; for example Value.h must include llvm-c/Core.h. I think
this is harmless, since the C API headers contain just external function
declarations and some C types, so I don't believe there should be any
nasty dependency issues here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180881 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes 2013-04-04-RelocAddend.ll. We don't have a testcase for non external
relocs with an Addend. I will try to write one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180767 91177308-0d34-0410-b5e6-96231b3b80d8
For regular object files this is only meaningful for common symbols. An object
file format with direct support for atoms should be able to provide alignment
information for all symbols.
This replaces getCommonSymbolAlignment and fixes
test-common-symbols-alignment.ll on darwin. This also includes a fix to
MachOObjectFile::getSymbolFlags. It was marking undefined symbols as common
(already tested by existing mcjit tests now that it is used).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180736 91177308-0d34-0410-b5e6-96231b3b80d8
The implemented RuntimeDyldImpl interface is public. Everything else is private.
Since these classes are not inherited from (yet), there is no need to have
protected members.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180733 91177308-0d34-0410-b5e6-96231b3b80d8
Re-submitting with fix for OCaml dependency problems (removing dependency on SectionMemoryManager when it isn't used).
Patch by Fili Pizlo
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180720 91177308-0d34-0410-b5e6-96231b3b80d8
For MachO we need information that is not represented in ObjRelocationInfo.
Instead of copying the bits we think are needed from a relocation_iterator,
just pass the relocation_iterator down to the format specific functions.
No functionality change yet as we still drop the information once
processRelocationRef returns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180711 91177308-0d34-0410-b5e6-96231b3b80d8
For Mach-O there were 2 implementations for parsing object files. A
standalone llvm/Object/MachOObject.h and llvm/Object/MachO.h which
implements the generic interface in llvm/Object/ObjectFile.h.
This patch adds the missing features to MachO.h, moves macho-dump to
use MachO.h and removes ObjectFile.h.
In addition to making sure that check-all is clean, I checked that the
new version produces exactly the same output in all Mach-O files in a
llvm+clang build directory (including executables and shared
libraries).
To test the performance, I ran macho-dump over all the files in a
llvm+clang build directory again, but this time redirecting the output
to /dev/null. Both the old and new versions take about 4.6 seconds
(2.5 user) to finish.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180624 91177308-0d34-0410-b5e6-96231b3b80d8
