This patch changes the design of GlobalAlias so that it doesn't take a
ConstantExpr anymore. It now points directly to a GlobalObject, but its type is
independent of the aliasee type.
To avoid changing all alias related tests in this patches, I kept the common
syntax
@foo = alias i32* @bar
to mean the same as now. The cases that used to use cast now use the more
general syntax
@foo = alias i16, i32* @bar.
Note that GlobalAlias now behaves a bit more like GlobalVariable. We
know that its type is always a pointer, so we omit the '*'.
For the bitcode, a nice surprise is that we were writing both identical types
already, so the format change is minimal. Auto upgrade is handled by looking
through the casts and no new fields are needed for now. New bitcode will
simply have different types for Alias and Aliasee.
One last interesting point in the patch is that replaceAllUsesWith becomes
smart enough to avoid putting a ConstantExpr in the aliasee. This seems better
than checking and updating every caller.
A followup patch will delete getAliasedGlobal now that it is redundant. Another
patch will add support for an explicit offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209007 91177308-0d34-0410-b5e6-96231b3b80d8
This is part of the fix for pr10367. A GlobalAlias always has a pointer type,
so just have the constructor build the type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208983 91177308-0d34-0410-b5e6-96231b3b80d8
Patch replaces old isEquivalentGEP implementation, and changes type of
comparison result from bool (equal or not) to {-1, 0, 1} (less, equal, greater).
This patch belongs to patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208976 91177308-0d34-0410-b5e6-96231b3b80d8
Patch replaces old isEquivalentOperation implementation, and changes type of
comparison result from bool (equal or not) to {-1, 0, 1} (less, equal, greater).
This patch belongs to patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208973 91177308-0d34-0410-b5e6-96231b3b80d8
This patch belongs to patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208953 91177308-0d34-0410-b5e6-96231b3b80d8
The change to ExtractGV.cpp has no functionality change except to avoid
the asserts. Existing testcases already cover this, so I didn't add a
new one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208264 91177308-0d34-0410-b5e6-96231b3b80d8
This is a third patch of patch series that improves MergeFunctions
performance time from O(N*N) to O(N*log(N)).
This patch description:
Being comparing functions we need to compare values we meet at left and
right sides.
Its easy to sort things out for external values. It just should be
the same value at left and right.
But for local values (those were introduced inside function body)
we have to ensure they were introduced at exactly the same place,
and plays the same role.
In short, patch introduces values serial numbering and comparison routine.
The last one compares two values by their serial numbers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208189 91177308-0d34-0410-b5e6-96231b3b80d8
O(N*log(N)). The idea is to introduce total ordering among functions set.
It allows to build binary tree and perform function look-up procedure in O(log(N)) time.
This patch description:
Introduced total ordering among constants implemented in cmpConstants method.
Method performs lexicographical comparison between constants represented as
hypothetical numbers of next format:
<bitcastability-trait><raw-bit-contents>
Please, read cmpConstants declaration comments for more details.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208173 91177308-0d34-0410-b5e6-96231b3b80d8
Visibility is meaningless when the linkage is local. Change
`-internalize` to reset the visibility to `default`.
<rdar://problem/16141113>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207979 91177308-0d34-0410-b5e6-96231b3b80d8
There is no point in creating it if we're not going to vectorize
anything. Creating the map is expensive as it creates large values.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207916 91177308-0d34-0410-b5e6-96231b3b80d8
This moves most of GlobalOpt's constructor optimization
code out of GlobalOpt into Transforms/Utils/CDtorUtils.{h,cpp}. The
public interface is a single function OptimizeGlobalCtorsList() that
takes a predicate returning which constructors to remove.
GlobalOpt calls this with a function that statically evaluates all
constructors, just like it did before. This part of the change is
behavior-preserving.
Also add a call to this from GlobalDCE with a filter that removes global
constructors that contain a "ret" instruction and nothing else – this
fixes PR19590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207856 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
override the default cold threshold.
When we use command line argument to set the inline threshold, the default
cold threshold will not be used. This is in line with how we use
OptSizeThreshold. When we want a higher threshold for all functions, we
do not have to set both inline threshold and cold threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207245 91177308-0d34-0410-b5e6-96231b3b80d8
definition below all of the header #include lines, lib/Transforms/...
edition.
This one is tricky for two reasons. We again have a couple of passes
that define something else before the includes as well. I've sunk their
name macros with the DEBUG_TYPE.
Also, InstCombine contains headers that need DEBUG_TYPE, so now those
headers #define and #undef DEBUG_TYPE around their code, leaving them
well formed modular headers. Fixing these headers was a large motivation
for all of these changes, as "leaky" macros of this form are hard on the
modules implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206844 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to r202051, add missing loop simplification passes to the LTO
optimization pipeline.
Patch by Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206306 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds backend support for -Rpass=, which indicates the name
of the optimization pass that should emit remarks stating when it
made a transformation to the code.
Pass names are taken from their DEBUG_NAME definitions.
When emitting an optimization report diagnostic, the lack of debug
information causes the diagnostic to use "<unknown>:0:0" as the
location string.
This is the back end counterpart for
http://llvm-reviews.chandlerc.com/D3226
Reviewers: qcolombet
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205774 91177308-0d34-0410-b5e6-96231b3b80d8
The generic (concatenation) loop unroller is currently placed early in the
standard optimization pipeline. This is a good place to perform full unrolling,
but not the right place to perform partial/runtime unrolling. However, most
targets don't enable partial/runtime unrolling, so this never mattered.
However, even some x86 cores benefit from partial/runtime unrolling of very
small loops, and follow-up commits will enable this. First, we need to move
partial/runtime unrolling late in the optimization pipeline (importantly, this
is after SLP and loop vectorization, as vectorization can drastically change
the size of a loop), while keeping the full unrolling where it is now. This
change does just that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205264 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Tobias Güntner.
I tried to write a test, but the only difference is the Changed value that
gets returned. It can be tested with "opt -debug-pass=Executions -functionattrs,
but that doesn't seem worth it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205121 91177308-0d34-0410-b5e6-96231b3b80d8
When GlobalOpt has determined that a GlobalVariable only ever has two values,
it would convert the GlobalVariable to a boolean, and introduce SelectInsts
at every load, to choose between the two possible values. These SelectInsts
introduce overhead and other unpleasantness.
This patch makes GlobalOpt just add range metadata to loads from such
GlobalVariables instead. This enables the same main optimization (as seen in
test/Transforms/GlobalOpt/integer-bool.ll), without introducing selects.
The main downside is that it doesn't get the memory savings of shrinking such
GlobalVariables, but this is expected to be negligible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204076 91177308-0d34-0410-b5e6-96231b3b80d8
O(N*log(N)). The idea is to introduce total ordering among functions set.
That allows to build binary tree and perform function look-up procedure in O(log(N)) time.
This patch description:
Introduced total ordering among Type instances. Actually it is improvement for existing
isEquivalentType.
0. Coerce pointer of 0 address space to integer.
1. If left and right types are equal (the same Type* value), return 0 (means equal).
2. If types are of different kind (different type IDs). Return result of type IDs
comparison, treating them as numbers.
3. If types are vectors or integers, return result of its
pointers comparison (casted to numbers).
4. Check whether type ID belongs to the next group:
* Void
* Float
* Double
* X86_FP80
* FP128
* PPC_FP128
* Label
* Metadata
If so, return 0.
5. If left and right are pointers, return result of address space
comparison (numbers comparison).
6. If types are complex.
Then both LEFT and RIGHT will be expanded and their element types will be checked with
the same way. If we get Res != 0 on some stage, return it. Otherwise return 0.
7. For all other cases put llvm_unreachable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203788 91177308-0d34-0410-b5e6-96231b3b80d8
There's a bit of duplicated "magic" code in opt.cpp and Clang's CodeGen that
computes the inliner threshold from opt level and size opt level.
This patch moves the code to a function that lives alongside the inliner itself,
providing a convenient overload to the inliner creation.
A separate patch can be committed to Clang to use this once it's committed to
LLVM. Standalone tools that use the inlining pass can also avoid duplicating
this code and fearing it will go out of sync.
Note: this patch also restructures the conditinal logic of the computation to
be cleaner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203669 91177308-0d34-0410-b5e6-96231b3b80d8
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203559 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a number of steps.
1) Move value_use_iterator into the Value class as an implementation
detail
2) Change it to actually be a *Use* iterator rather than a *User*
iterator.
3) Add an adaptor which is a User iterator that always looks through the
Use to the User.
4) Wrap these in Value::use_iterator and Value::user_iterator typedefs.
5) Add the range adaptors as Value::uses() and Value::users().
6) Update *all* of the callers to correctly distinguish between whether
they wanted a use_iterator (and to explicitly dig out the User when
needed), or a user_iterator which makes the Use itself totally
opaque.
Because #6 requires churning essentially everything that walked the
Use-Def chains, I went ahead and added all of the range adaptors and
switched them to range-based loops where appropriate. Also because the
renaming requires at least churning every line of code, it didn't make
any sense to split these up into multiple commits -- all of which would
touch all of the same lies of code.
The result is still not quite optimal. The Value::use_iterator is a nice
regular iterator, but Value::user_iterator is an iterator over User*s
rather than over the User objects themselves. As a consequence, it fits
a bit awkwardly into the range-based world and it has the weird
extra-dereferencing 'operator->' that so many of our iterators have.
I think this could be fixed by providing something which transforms
a range of T&s into a range of T*s, but that *can* be separated into
another patch, and it isn't yet 100% clear whether this is the right
move.
However, this change gets us most of the benefit and cleans up
a substantial amount of code around Use and User. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203364 91177308-0d34-0410-b5e6-96231b3b80d8
to ensure we don't mess up any of the overrides. Necessary for cleaning
up the Value use iterators and enabling range-based traversing of use
lists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202958 91177308-0d34-0410-b5e6-96231b3b80d8
