Rather than switching behaviour on whether a previous symbol has an auxiliary
symbol record for the next count of elements, simply iterate over the auxiliary
symbols right after processing the current symbol entry. This makes the
behaviour much simpler to follow and similar to llvm-readobj and yaml2obj.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206146 91177308-0d34-0410-b5e6-96231b3b80d8
If a filename is a multiple of 18 characters, there will be no null-terminator.
This will result in an invalid access by the constructed StringRef. Add a test
case to exercise this and fix that handling. Address this same vulnerability in
llvm-readobj as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206145 91177308-0d34-0410-b5e6-96231b3b80d8
The auxiliary file records are contiguous and only contain the filename.
Construct a StringRef directly rather than copying to a temporary buffer.
Suggested by majnemer on IRC!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206139 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for file auxiliary symbol entries in COFF symbol tables. A COFF
symbol table with a FILE entry is followed by sizeof(__FILE__) / 18 auxiliary
symbol records which contain the filename. Read them and form the original
filename that the record contains. Then display the name in the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206126 91177308-0d34-0410-b5e6-96231b3b80d8
When -mcpu=native is passed, autodetect the host CPU and pass that
as the CPU name to the TargetMachine factory method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206095 91177308-0d34-0410-b5e6-96231b3b80d8
The patch implements support for both relocation record formats: Elf_Rel
and Elf_Rela. It is possible to define relocation against symbol only.
Relocations against sections will be implemented later. Now yaml2obj
recognizes X86_64, MIPS and Hexagon relocation types.
Example of relocation section specification:
Sections:
- Name: .text
Type: SHT_PROGBITS
Content: "0000000000000000"
AddressAlign: 16
Flags: [SHF_ALLOC]
- Name: .rel.text
Type: SHT_REL
Info: .text
AddressAlign: 4
Relocations:
- Offset: 0x1
Symbol: glob1
Type: R_MIPS_32
- Offset: 0x2
Symbol: glob2
Type: R_MIPS_CALL16
The patch reviewed by Michael Spencer, Sean Silva, Shankar Easwaran.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206017 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r205479.
It turns out that nm does use addresses, it is just that every reasonable
relocatable ELF object has sections with address 0. I have no idea if those
exist in reality, but it at least it shows that llvm-nm should use the name
address.
The added test was includes an unusual .o file with non 0 section addresses. I
created it by hacking ELFObjectWriter.cpp.
Really sorry for the churn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205493 91177308-0d34-0410-b5e6-96231b3b80d8
What llvm-nm prints depends on the file format. On ELF for example, if the
file is relocatable, it prints offsets. If it is not, it prints addresses.
Since it doesn't really need to care what it is that it is printing, use the
generic term value.
Fix or implement getSymbolValue to keep llvm-nm working.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205479 91177308-0d34-0410-b5e6-96231b3b80d8
and ContiguousBlobAccumulator classes. Pass ContiguousBlobAccumulator to
the handleSymtabSectionHeader function directly.
No functional changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205431 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The FileHeader mapping now accepts an optional Flags sequence that accepts
the EF_<arch>_<flag> constants. When not given, Flags defaults to zero.
Reviewers: atanasyan
Reviewed By: atanasyan
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3213
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205173 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit of a stab in the dark, since I have zlib on my machine.
Just going to bounce it off the bots & see if it sticks.
Do we have some convention for negative REQUIRES: checks? Or do I just
need to add a feature like I've done here?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205050 91177308-0d34-0410-b5e6-96231b3b80d8
1) When creating a .debug_* section and instead create a .zdebug_
section.
2) When creating a fragment in a .zdebug_* section, make it a compressed
fragment.
3) When computing the size of a compressed section, compress the data
and use the size of the compressed data.
4) Emit the compressed bytes.
Also, check that only if a section has a compressed fragment, then that
is the only fragment in the section.
Assert-fail if the fragment's data is modified after it is compressed.
Initial review on llvm-commits by Eric Christopher and Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204958 91177308-0d34-0410-b5e6-96231b3b80d8
We need .symtab_shndxr if and only if a symbol references a section with an
index >= 0xff00.
The old code was trying to figure out if the section was needed ahead of time,
making it a fairly dependent on the code actually writing the table. It was
also somewhat conservative and would create the section in cases where it was
not needed.
If I remember correctly, the old structure was there so that the sections were
created in the same order gas creates them. That was valuable when MC's support
for ELF was new and we tested with elf-dump.py.
This patch refactors the symbol table creation to another class and makes it
obvious that .symtab_shndxr is really only created when we are about to output
a reference to a section index >= 0xff00.
While here, also improve the tests to use macros. One file is one section
short of needing .symtab_shndxr, the second one has just the right number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204769 91177308-0d34-0410-b5e6-96231b3b80d8
Implement debug_loc.dwo, as well as llvm-dwarfdump support for dumping
this section.
Outlined in the DWARF5 spec and http://gcc.gnu.org/wiki/DebugFission the
debug_loc.dwo section has more variation than the standard debug_loc,
allowing 3 different forms of entry (plus the end of list entry). GCC
seems to, and Clang certainly, only use one form, so I've just
implemented dumping support for that for now.
It wasn't immediately obvious that there was a good refactoring to share
the implementation of dumping support between debug_loc and
debug_loc.dwo, so they're separate for now - ideas welcome or I may come
back to it at some point.
As per a comment in the code, we could choose different forms that may
reduce the number of debug_addr entries we emit, but that will require
further study.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204697 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would print an error message on machines where the only VS
version we find is 2013, even though we successfully install the integration
files for it.
Also, we shouldn't have two END labels.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204629 91177308-0d34-0410-b5e6-96231b3b80d8
This isn't a format we'll want to write out in practice, but moving it
to the writer library simplifies llvm-profdata and isolates it from
further changes to the format.
This also allows us to update the tests to not rely on the text output
format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204489 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces the ProfileData library and updates llvm-profdata to
use this library for reading profiles. InstrProfReader is an abstract
base class that will be subclassed for both the raw instrprof data
from compiler-rt and the efficient instrprof format that will be used
for PGO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204482 91177308-0d34-0410-b5e6-96231b3b80d8
obj2yaml would emit the NUL bytes padding the auxiliary file symbol
records. Trimming them looks nicer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204314 91177308-0d34-0410-b5e6-96231b3b80d8
The current state of affairs has auxiliary symbols described as a big
bag of bytes. This is less than satisfying, it detracts from the YAML
file as being human readable.
Instead, allow for symbols to optionally contain their auxiliary data.
This allows us to have a much higher level way of describing things like
weak symbols, function definitions and section definitions.
This depends on D3105.
Differential Revision: http://llvm-reviews.chandlerc.com/D3092
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204214 91177308-0d34-0410-b5e6-96231b3b80d8
Allow object files to be tagged with a version-min load command for iOS
or MacOSX.
Teach macho-dump to understand the version-min load commands for
testcases.
rdar://11337778
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204190 91177308-0d34-0410-b5e6-96231b3b80d8
Since our error_category is based on the std one, we should have the
same visibility for the constructor. This also allows us to avoid
using the _do_message implementation detail in our own categories.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203998 91177308-0d34-0410-b5e6-96231b3b80d8
