function and a FunctionPass.
This has many benefits. The motivating use case was to be able to
compute function analysis passes *after* running LoopSimplify (to avoid
invalidating them) and then to run other passes which require
LoopSimplify. Specifically passes like unrolling and vectorization are
critical to wire up to BranchProbabilityInfo and BlockFrequencyInfo so
that they can be profile aware. For the LoopVectorize pass the only
things in the way are LoopSimplify and LCSSA. This fixes LoopSimplify
and LCSSA is next on my list.
There are also a bunch of other benefits of doing this:
- It is now very feasible to make more passes *preserve* LoopSimplify
because they can simply run it after changing a loop. Because
subsequence passes can assume LoopSimplify is preserved we can reduce
the runs of this pass to the times when we actually mutate a loop
structure.
- The new pass manager should be able to more easily support loop passes
factored in this way.
- We can at long, long last observe that LoopSimplify is preserved
across SCEV. This *halves* the number of times we run LoopSimplify!!!
Now, getting here wasn't trivial. First off, the interfaces used by
LoopSimplify are all over the map regarding how analysis are updated. We
end up with weird "pass" parameters as a consequence. I'll try to clean
at least some of this up later -- I'll have to have it all clean for the
new pass manager.
Next up I discovered a really frustrating bug. LoopUnroll *claims* to
preserve LoopSimplify. That's actually a lie. But the way the
LoopPassManager ends up running the passes, it always ran LoopSimplify
on the unrolled-into loop, rectifying this oversight before any
verification could kick in and point out that in fact nothing was
preserved. So I've added code to the unroller to *actually* simplify the
surrounding loop when it succeeds at unrolling.
The only functional change in the test suite is that we now catch a case
that was previously missed because SCEV and other loop transforms see
their containing loops as simplified and thus don't miss some
opportunities. One test case has been converted to check that we catch
this case rather than checking that we miss it but at least don't get
the wrong answer.
Note that I have #if-ed out all of the verification logic in
LoopSimplify! This is a temporary workaround while extracting these bits
from the LoopPassManager. Currently, there is no way to have a pass in
the LoopPassManager which preserves LoopSimplify along with one which
does not. The LPM will try to verify on each loop in the nest that
LoopSimplify holds but the now-Function-pass cannot distinguish what
loop is being verified and so must try to verify all of them. The inner
most loop is clearly no longer simplified as there is a pass which
didn't even *attempt* to preserve it. =/ Once I get LCSSA out (and maybe
LoopVectorize and some other fixes) I'll be able to re-enable this check
and catch any places where we are still failing to preserve
LoopSimplify. If this causes problems I can back this out and try to
commit *all* of this at once, but so far this seems to work and allow
much more incremental progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199884 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. linkonce, to TargetMachine and set it when we've done so
for ELF targets currently. This involved making TargetMachine
non-const in a TLOF use and propagating that change around - I'm
open to other ideas.
This will be used in a future commit to handle emitting debug
information with ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199871 91177308-0d34-0410-b5e6-96231b3b80d8
This patch restores the ARM mode if the user's inline assembly
does not. In the object streamer, it ensures that instructions
following the inline assembly are encoded correctly and that
correct mapping symbols are emitted. For the asm streamer, it
emits a .arm or .thumb directive.
This patch does not ensure that the inline assembly contains
the ADR instruction to switch modes at runtime.
The problem we need to solve is code like this:
int foo(int a, int b) {
int r = a + b;
asm volatile(
".align 2 \n"
".arm \n"
"add r0,r0,r0 \n"
: : "r"(r));
return r+1;
}
If we compile this function in thumb mode then the inline assembly
will switch to arm mode. We need to make sure that we switch back to
thumb mode after emitting the inline assembly or we will incorrectly
encode the instructions that follow (i.e. the assembly instructions
for return r+1).
Based on patch by David Peixotto
Change-Id: Ib57f6d2d78a22afad5de8693fba6230ff56ba48b
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199818 91177308-0d34-0410-b5e6-96231b3b80d8
identify_magic is not free, so we should avoid calling it twice. The argument
also makes it cheap for createBinary to just forward to createObjectFile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199813 91177308-0d34-0410-b5e6-96231b3b80d8
The constructors of classes deriving from Binary normally take an error_code
as an argument to the constructor. My original intent was to change them
to have a trivial constructor and move the initial parsing logic to a static
method returning an ErrorOr. I changed my mind because:
* A constructor with an error_code out parameter is extremely convenient from
the implementation side. We can incrementally construct the object and give
up when we find an error.
* It is very efficient when constructing on the stack or when there is no
error. The only inefficient case is where heap allocating and an error is
found (we have to free the memory).
The result is that this is a much smaller patch. It just standardizes the
create* helpers to return an ErrorOr.
Almost no functionality change: The only difference is that this found that
we were trying to read past the end of COFF import library but ignoring the
error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199770 91177308-0d34-0410-b5e6-96231b3b80d8
This is apparently a bit of a white lie (they can affect DSPControl for
overflow etc) but similar to how we currently handle floating-point operations.
When it becomes relevant the whole lot can be reviewed properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199718 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the unwind_raw directive for the ARM IAS. The unwind_raw
directive takes the form of a stack offset value followed by one or more bytes
representing the opcodes to be emitted. The opcode emitted will interpreted as
if it were assembled by the opcode assembler via the standard unwinding
directives.
Thanks to Logan Chien for an extra test!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199707 91177308-0d34-0410-b5e6-96231b3b80d8
The .personalityindex directive is equivalent to the .personality directive with
the ARM EABI personality with the specific index (0, 1, 2). Both of these
directives indicate personality routines, so enhance the personality directive
handling to take into account personalityindex.
Bonus fix: flush the UnwindContext at the beginning of a new function.
Thanks to Logan Chien for additional tests!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199706 91177308-0d34-0410-b5e6-96231b3b80d8
StackProtector keeps a ValueMap of alloca instructions to layout kind tags for
use by PEI and other later passes. When stack coloring replaces one alloca with
a bitcast to another one, the key replacement in this map does not work.
Instead, provide an interface to manage this updating directly. This seems like
an improvement over the old behavior, where the layout map would not get
updated at all when the stack slots were merged. In practice, however, there is
likely no observable difference because PEI only did anything special with
'large array' kinds, and if one large array is merged with another, than the
replacement should already have been a large array.
This is an attempt to unbreak the clang-x86_64-darwin11-RA builder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199684 91177308-0d34-0410-b5e6-96231b3b80d8
various opt verifier commandline options.
Mostly mechanical wiring of the verifier to the new pass manager.
Exercises one of the more unusual aspects of it -- a pass can be either
a module or function pass interchangably. If this is ever problematic,
we can make things more constrained, but for things like the verifier
where there is an "obvious" applicability at both levels, it seems
convenient.
This is the next-to-last piece of basic functionality left to make the
opt commandline driving of the new pass manager minimally functional for
testing and further development. There is still a lot to be done there
(notably the factoring into .def files to kill the current boilerplate
code) but it is relatively uninteresting. The only interesting bit left
for minimal functionality is supporting the registration of analyses.
I'm planning on doing that on top of the .def file switch mostly because
the boilerplate for the analyses would be significantly worse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199646 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for the symbol(tlsldo) relocation. This is required in order to
solve PR18554.
Reviewed by R. Golin, A. Korobeynikov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199644 91177308-0d34-0410-b5e6-96231b3b80d8
Have I mentioned that functions returning true on error and false on
success are confusing? They're more confusing when their name is
"verify". Anyways...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199622 91177308-0d34-0410-b5e6-96231b3b80d8
This was due to arithmetic overflow in the getNumBits() computation. Now we
cast BitWidth to a uint64_t so that does not occur during the computation. After
the computation is complete, the uint64_t is truncated when the function
returns.
I know that this is not something that is likely to happen, but it *IS* a valid
input and we should not blow up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199609 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the ARM build attributes definitions and support routines into the
Support library. The support routines simply permit the conversion of the value
to and from a string representation.
The movement is prompted in order to permit access to the constants and string
representations from readobj in order to facilitate decoding of the attributes
section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199575 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the 'verifyFunction' and 'verifyModule' functions totally
independent operations on the LLVM IR. It also cleans up their API a bit
by lifting the abort behavior into their clients and just using an
optional raw_ostream parameter to control printing.
The implementation of the verifier is now just an InstVisitor with no
multiple inheritance. It also is significantly more const-correct, and
hides the const violations internally. The two layers that force us to
break const correctness are building a DomTree and dispatching through
the InstVisitor.
A new VerifierPass is used to implement the legacy pass manager
interface in terms of the other pieces.
The error messages produced may be slightly different now, and we may
have slightly different short circuiting behavior with different usage
models of the verifier, but generally everything works equivalently and
this unblocks wiring the verifier up to the new pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199569 91177308-0d34-0410-b5e6-96231b3b80d8
one, but not create one. This is useful in the verifier when we want to
query the constant if it exists but not create one. To be used in an
upcoming commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199568 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The only current use of this flag is to mark the alloca as dynamic, even
if its in the entry block. The stack adjustment for the alloca can
never be folded into the prologue because the call may clear it and it
has to be allocated at the top of the stack.
Reviewers: majnemer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2571
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199525 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds two new target-independent calling conventions for runtime
calls - PreserveMost and PreserveAll.
The target-specific implementation for X86-64 is defined as following:
- Arguments are passed as for the default C calling convention
- The same applies for the return value(s)
- PreserveMost preserves all GPRs - except R11
- PreserveAll preserves all GPRs and all XMMs/YMMs - except R11
Reviewed by Lang and Philip
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199508 91177308-0d34-0410-b5e6-96231b3b80d8
and tweak comments prior to more invasive surgery. Also clean up some
other non-doxygen comments, and run clang-format over the parts that are
going to change dramatically in subsequent commits so that those don't
get cluttered with formatting changes.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199489 91177308-0d34-0410-b5e6-96231b3b80d8
the verifier after ensuring the CFG is at least usefully formed.
This fixes a number of problems:
1) The PreVerifier was missing the controls the Verifier provides over
*how* an invalid module is handled -- it just aborted the program!
Now it uses the same logic as the Verifier which is significantly
more library-friendly.
2) The DominatorTree used previously could have been cached and not
updated due to bugs in prior passes and we would silently use the
stale tree. This could cause dominance errors to not be as quickly
diagnosed.
3) We can now (in the next patch) pull the functionality of the verifier
apart from the pass infrastructure so that you can verify IR without
having any form of pass manager. This in turn frees the code to share
logic between old and new pass manager variants.
Along the way I fixed at least one annoying bug -- the state for
'Broken' wasn't being cleared from run to run causing all functions
visited after the first broken function to be marked as broken
regardless of whether *they* were a problem. Fortunately, I don't really
know much of a way to observe this peculiarity.
In case folks are worried about the runtime cost, its negligible.
I looked at running the entire regression test suite (which should be
a relatively good use of the verifier) before and after but was unable
to even measure the time spent on the verifier and there was no
regresion from before to after. I checked both with debug builds and
optimized builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199487 91177308-0d34-0410-b5e6-96231b3b80d8
When registering a pass, a pass can now specify a second construct that takes as
argument a pointer to TargetMachine.
The PassInfo class has been updated to reflect that possibility.
If such a constructor exists opt will use it instead of the default constructor
when instantiating the pass.
Since such IR passes are supposed to be rare, no specific support has been
added to this commit to allow an easy registration of such a pass.
In other words, for such pass, the initialization function has to be
hand-written (see CodeGenPrepare for instance).
Now, codegenprepare can be tested using opt:
opt -codegenprepare -mtriple=mytriple input.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199430 91177308-0d34-0410-b5e6-96231b3b80d8
Adding a doxygen comment for each bit of API to indicate at which
LTO_API_VERSION each was available, manually gleaned from successive
git-blames. A few notes:
- LTO_API_VERSION was set to 3 at its introduction.
- I've indicated all the API introduced before LTO_API_VERSION was
around as available "prior to LTO_API_VERSION=3".
- A number of API changes neglected to bump LTO_API_VERSION. These I've
indicated as available at the *next* bump of LTO_API_VERSION.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199429 91177308-0d34-0410-b5e6-96231b3b80d8
flag from clang, and disable zero-base shadow support on all platforms
where it is not the default behavior.
- It is completely unused, as far as we know.
- It is ABI-incompatible with non-zero-base shadow, which means all
objects in a process must be built with the same setting. Failing to
do so results in a segmentation fault at runtime.
- It introduces a backward dependency of compiler-rt on user code,
which is uncommon and complicates testing.
This is the LLVM part of a larger change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199371 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the capability to dump export table contents. An example
output is this:
Export Table:
Ordinal RVA Name
5 0x2008 exportfn1
6 0x2010 exportfn2
By adding this feature to llvm-objdump, we will be able to use it to check
export table contents in LLD's tests. Currently we are doing binary
comparison in the tests, which is fragile and not readable to humans.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199358 91177308-0d34-0410-b5e6-96231b3b80d8
DataRefImpl (a union of two integers and a pointer) is not the ideal data type
to represent a reference to an import directory entity. We should just use the
pointer to the import table and an offset instead to simplify. No functionality
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199349 91177308-0d34-0410-b5e6-96231b3b80d8
ARM assembly syntax uses @ for a comment, execpt for the second
parameter of the .symver directive which requires @ as part of the
symbol name. This commit fixes the parsing of this directive by
adding a special case for ARM for this one argumnet.
To make the change we had to move the AllowAtInIdentifier variable
to the MCAsmLexer interface (from AsmLexer) and expose a setter for
the value. The ELFAsmParser then toggles this value when parsing
the second argument to the .symver directive for a target that
uses @ as a comment symbol
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199339 91177308-0d34-0410-b5e6-96231b3b80d8
Add a hook in the C API of LTO so that clients of the code generator can set
their own handler for the LLVM diagnostics.
The handler is defined like this:
typedef void (*lto_diagnostic_handler_t)(lto_codegen_diagnostic_severity_t
severity, const char *diag, void *ctxt)
- severity says how bad this is.
- diag is a string that contains the diagnostic message.
- ctxt is the registered context for this handler.
This hook is more general than the lto_get_error_message, since this function
keeps only the latest message and can only be queried when something went wrong
(no warning for instance).
<rdar://problem/15517596>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199338 91177308-0d34-0410-b5e6-96231b3b80d8
