Commit Graph

7 Commits

Author SHA1 Message Date
David Blaikie
7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
Chandler Carruth
454c3997b4 [x86] Teach the 128-bit vector shuffle lowering routines to take
advantage of the existence of a reasonable blend instruction.

The 256-bit vector shuffle lowering has leveraged the general technique
of decomposed shuffles and blends for quite some time, but this never
made it back into the 128-bit code, and there are a large number of
patterns where this is substantially better. For example, this removes
almost all domain crossing in vector shuffles that involve some blend
and some permutation with SSE4.1 and later. See the massive reduction
in 'shufps' for integer test cases in this commit.

This isn't perfect yet for a few reasons:

1) The v8i16 shuffle lowering continues to plague me. We don't always
   form an unpack-based blend when that would be better. But the wins
   pretty drastically outstrip the losses here.
2) The v16i8 shuffle lowering is just a disaster here. I never went and
   implemented blend support here for some terrible reason. I'll do
   that next probably. I've not updated it for now.

More variations on this technique are coming as well -- we don't
shuffle-into-unpack or shuffle-into-palignr, both of which would also be
profitable.

Note that some test cases grow significantly in the number of
instructions, but I expect to actually be faster. We use
pshufd+pshufd+blendw instead of a single shufps, but the pshufd's are
very likely to pipeline well (two ports on most modern intel chips) and
the blend is a *very* fast instruction. The domain switch penalty will
essentially always be more than a blend instruction, which is the only
increase in tree height.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229350 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-16 01:52:02 +00:00
Chandler Carruth
1b1fbccf49 [x86] Make vector legalization of extloads work more like the "normal"
vector operation legalization with support for custom target lowering
and fallback to expand when it fails, and use this to implement sext and
anyext load lowering for x86 in a more principled way.

Previously, the x86 backend relied on a target DAG combine to "combine
away" sextload and extload nodes prior to legalization, or would expand
them during legalization with terrible code. This is particularly
problematic because the DAG combine relies on running over non-canonical
DAG nodes at just the right time to match several common and important
patterns. It used a combine rather than lowering because we didn't have
good lowering support, and to expose some tricks being employed to more
combine phases.

With this change it becomes a proper lowering operation, the backend
marks that it can lower these nodes, and I've added support for handling
the canonical forms that don't have direct legal representations such as
sextload of a v4i8 -> v4i64 on AVX1. With this change, our test cases
for this behavior continue to pass even after the DAG combiner beigns
running more systematically over every node.

There is some noise caused by this in the test suite where we actually
use vector extends instead of subregister extraction. This doesn't
really seem like the right thing to do, but is unlikely to be a critical
regression. We do regress in one case where by lowering to the
target-specific patterns early we were able to combine away extraneous
legal math nodes. However, this regression is completely addressed by
switching to a widening based legalization which is what I'm working
toward anyways, so I've just switched the test to that mode.

Differential Revision: http://reviews.llvm.org/D4654

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213897 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-24 22:09:56 +00:00
Nadav Rotem
d16c8d0d33 1. Remove the part of r153848 which optimizes shuffle-of-shuffle into a new
shuffle node because it could introduce new shuffle nodes that were not
   supported efficiently by the target.

2. Add a more restrictive shuffle-of-shuffle optimization for cases where the
   second shuffle reverses the transformation of the first shuffle.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154266 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-07 21:19:08 +00:00
Nadav Rotem
43b32e0cff Add an additional testcase which checks ops with multiple users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153939 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-03 07:39:36 +00:00
Nadav Rotem
44b5e6de8c Optimizing swizzles of complex shuffles may generate additional complex shuffles.
Do not try to optimize swizzles of shuffles if the source shuffle has more than
a single user, except when the source shuffle is also a swizzle.






git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153864 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-02 07:11:12 +00:00
Nadav Rotem
4ac9081c71 This commit contains a few changes that had to go in together.
1. Simplify xor/and/or (bitcast(A), bitcast(B)) -> bitcast(op (A,B))
   (and also scalar_to_vector).

2. Xor/and/or are indifferent to the swizzle operation (shuffle of one src).
   Simplify xor/and/or (shuff(A), shuff(B)) -> shuff(op (A, B))

3. Optimize swizzles of shuffles:  shuff(shuff(x, y), undef) -> shuff(x, y).

4. Fix an X86ISelLowering optimization which was very bitcast-sensitive.

Code which was previously compiled to this:

movd    (%rsi), %xmm0
movdqa  .LCPI0_0(%rip), %xmm2
pshufb  %xmm2, %xmm0
movd    (%rdi), %xmm1
pshufb  %xmm2, %xmm1
pxor    %xmm0, %xmm1
pshufb  .LCPI0_1(%rip), %xmm1
movd    %xmm1, (%rdi)
ret

Now compiles to this:

movl    (%rsi), %eax
xorl    %eax, (%rdi)
ret




git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153848 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-01 19:31:22 +00:00