Use `DIEValueList` as a pointer to either `DIEBlock` or `DIELoc` instead
of `DIE`, since soon they won't inherit from the latter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243857 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Differential Revision: http://reviews.llvm.org/D11097
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243766 91177308-0d34-0410-b5e6-96231b3b80d8
Prevent all the unrelated LLVM options to appear in the -help output
by introducing a tool specific option category. As a drive-by improve
the wording of the help message.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243583 91177308-0d34-0410-b5e6-96231b3b80d8
The dsymutil-classic -v option dumps the tool version rather than
putting it in verbose mode. Rename -v to -verbose and update the
tests that use it (in the process removing it from a few tests that
didn't require it anymore since the -dump-debug-map option was
introduced).
A followup commit will reintroduce the -v option that dumps the
version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243582 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When LLVM is configured to build shared libraries, CMake builds each component as it's own shared object, while autoconfig/make builds them statically and then links them all together to create a single shared object. This change adds compile time config flags to `llvm-config` so it can know whether LLVM's components are separated or not and act accordingly.
This fixes `llvm-config` instead of fixing the makefiles to behave like CMake because, AIUI, LLVM's autoconfig/make build system is on the way out anyway.
This change only affects `llvm-config` from builds that use autoconfig/make.
Reviewers: jfb
Subscribers: echristo, dschuff, llvm-commits
Differential Revision: http://reviews.llvm.org/D11392
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243297 91177308-0d34-0410-b5e6-96231b3b80d8
Around 10 year ago Chris limited this code to a single iteration by just
dropping a break into the loop body. We now make the number of trim iterations
a compile time constant to be able to play with it and see if this can
improve the bugpoint results. We currently use with '3' still a small and
conservative value, but this can be adjusted in the future, if needed.
I tried to look for a trivial test case, but did not succeed yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243247 91177308-0d34-0410-b5e6-96231b3b80d8
Some tools used to rely on a global static variable to keep track of the
return value for main(). I changed llvm-cxxdump to use exit(1)
and Rafael shortly after did the same with llvm-readobj. This is
(yet) another step towards the goal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243240 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243114 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows llvm-dsymutil to read universal (aka fat) macho object
files and archives. The patch touches nearly everything in the BinaryHolder,
but it is fairly mechinical: the methods that returned MemoryBufferRefs or
ObjectFiles now return a vector of those, and the high-level access function
takes a triple argument to select the architecture.
There is no support yet for handling fat executables and thus no support for
writing fat object files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243096 91177308-0d34-0410-b5e6-96231b3b80d8
MachOObjectFile offers a method for detecting the correct triple, use
it instead of the previous approximation. This doesn't matter right
now, but it will become important for mach-o universal (fat) binaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243095 91177308-0d34-0410-b5e6-96231b3b80d8
Call a helper that resets all the internal state of the BinaryHolder
when we change the underlying memory buffer. Makes a followup patch
a tiny bit smaller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243094 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 0f720d984f419c747709462f7476dff962c0bc41.
It breaks clang too badly, I need to prepare a proper patch for clang
first.
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243089 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Replace getDataLayout() with a createDataLayout() method to make
explicit that it is intended to create a DataLayout only and not
accessing it for other purpose.
This change is the last of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned
by the module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11103
(cherry picked from commit 5609fc56bca971e5a7efeaa6ca4676638eaec5ea)
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243083 91177308-0d34-0410-b5e6-96231b3b80d8
The debug map contains the timestamp of the object files in references.
We do not check these in the general case, but it's really useful if
you have archives where different versions of an object file have been
appended. This allows llvm-dsymutil to find the right one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242965 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization allows the DWARF linker to reuse definition of
types it has emitted in previous CUs rather than reemitting them
in each CU that references them. The size and link time gains are
huge. For example when linking the DWARF for a debug build of
clang, this generates a ~150M dwarf file instead of a ~700M one
(the numbers date back a bit and must not be totally accurate
these days).
As with all the other parts of the llvm-dsymutil codebase, the
goal is to keep bit-for-bit compatibility with dsymutil-classic.
The code is littered with a lot of FIXMEs that should be
addressed once we can get rid of the compatibilty goal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242847 91177308-0d34-0410-b5e6-96231b3b80d8
Not every program needs this information.
In particular, it is necessary and sufficient for a static linker to scan the
section table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242833 91177308-0d34-0410-b5e6-96231b3b80d8
One part of my refactoring from r242705 is untenable due to how CMake caches variables. There is no way other than caching to allow variables to be set in one directory and globally readable, but we really don't want to cache the temporary value marking that a directory has already been included.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242793 91177308-0d34-0410-b5e6-96231b3b80d8
Re-landing r242059 which re-landed r241621... I'm really bad at this.
Summary (r242059):
This change re-lands r241621, with an additional fix that was required to allow tool sources to live outside the llvm checkout. It also no longer renames LLVM_EXTERNAL_*_SOURCE_DIR. This change was reverted in r241663, because it renamed several variables of the format LLVM_EXTERNAL_*_* to LLVM_TOOL_*_*.
Summary (r241621):
The tools CMakeLists file already had implicit tool registration, but there were a few things off about it that needed to be altered to make it work. This change addresses all that. The changes in this patch are:
* factored out canonicalizing tool names from paths to CMake variables * removed the LLVM_IMPLICIT_PROJECT_IGNORE mechanism in favor of LLVM_EXTERNAL_${nameUPPER}_BUILD which I renamed to LLVM_TOOL_${nameUPPER}_BUILD because it applies to internal and external tools
* removed ignore_llvm_tool_subdirectory() in favor of just setting LLVM_TOOL_${nameUPPER}_BUILD to Off
* Added create_llvm_tool_options() to resolve a bug in add_llvm_external_project() - the old LLVM_EXTERNAL_${nameUPPER}_BUILD would not work on a clean CMake directory because the option could be created after it was set in code.
* Removed all but the minimum required calls to add_llvm_external_project from tools/CMakeLists.txt
Differential Revision: http://reviews.llvm.org/D10665
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242705 91177308-0d34-0410-b5e6-96231b3b80d8
