selects with a constant condition. This resulted in the operands
remaining live through the SROA rewriter. Most of the time, this just
caused some dead allocas to persist and get zapped by later passes, but
in one case found by Joerg, it caused a crash when we tried to *promote*
the alloca despite it having this dead use. We already have the
mechanisms in place to handle this, just wire select up to them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164427 91177308-0d34-0410-b5e6-96231b3b80d8
We rely on it when doing the transforms. This can happen when there is an
indirectbr in the loop.
Fixes PR13892.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164383 91177308-0d34-0410-b5e6-96231b3b80d8
We already have HoistThenElseCodeToIf, this patch implements
SinkThenElseCodeToEnd. When END block has only two predecessors and each
predecessor terminates with unconditional branches, we compare instructions in
IF and ELSE blocks backwards and check whether we can sink the common
instructions down.
rdar://12191395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164325 91177308-0d34-0410-b5e6-96231b3b80d8
two variables where the first variable is returned and the second
ignored.
I don't think this occurs in practice (other passes should have cleaned
up the unused phi node), but it should still be handled correctly.
Also make the logic for determining if we should return early less
sketchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164225 91177308-0d34-0410-b5e6-96231b3b80d8
Because the test invokes llc -march=sparc, it needs to be in a directory
which is only run when the sparc target is built.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164211 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up from r163302, which added a transformation to
SimplifyCFG that turns some switches into loads from lookup tables.
It was pointed out that some targets, such as GPUs and deeply embedded
targets, might not find this appropriate, but SimplifyCFG doesn't have
enough information about the target to decide this.
This patch adds the reverse transformation to CodeGenPrep: it turns
loads from lookup tables back into switches for targets where we do not
build jump tables (assuming these are also the targets where lookup
tables are inappropriate).
Hopefully we will eventually get to have target information in
SimplifyCFG, and then this CodeGenPrep transformation can be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164206 91177308-0d34-0410-b5e6-96231b3b80d8
from the dragonegg build bots when we turned on the full version of the
pass. Included a much reduced test case for this pesky bug, despite
bugpoint's uncooperative behavior.
Also, I audited all the similar code I could find and didn't spot any
other cases where this mistake cropped up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164178 91177308-0d34-0410-b5e6-96231b3b80d8
working on FCA splitting. Instead of refusing to form a common type when
there are uses of a subsection of the alloca as well as a use of the
entire alloca, just skip the subsection uses and continue looking for
a whole-alloca use with a type that we can use.
This produces slightly prettier IR I think, and also fixes the other
failure in the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164146 91177308-0d34-0410-b5e6-96231b3b80d8
FCAs. This is essential in order to promote allocas that are used in
struct returns by frontends like Clang. The FCA load would block the
rest of the pass from firing, resulting is significant regressions with
the bullet benchmark in the nightly test suite.
Thanks to Duncan for repeated discussions about how best to do this, and
to both him and Benjamin for review.
This appears to have blocked many places where the pass tries to fire,
and so I'm expect somewhat different results with this fix added.
As with the last big patch, I'm including a change to enable the SROA by
default *temporarily*. Ben is going to remove this as soon as the LNT
bots pick up the patch. I'm just trying to get a round of LNT numbers
from the stable machines in the lab.
NOTE: Four clang tests are expected to fail in the brief window where
this is enabled. Sorry for the noise!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164119 91177308-0d34-0410-b5e6-96231b3b80d8
Hanlde the case when we split the default edge if the default target has "icmp"
and unconditinal branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164076 91177308-0d34-0410-b5e6-96231b3b80d8
new one, and add support for running the new pass in that mode and in
that slot of the pass manager. With this the new pass can completely
replace the old one within the pipeline.
The strategy for enabling or disabling the SSAUpdater logic is to do it
by making the requirement of the domtree analysis optional. By default,
it is required and we get the standard mem2reg approach. This is usually
the desired strategy when run in stand-alone situations. Within the
CGSCC pass manager, we disable requiring of the domtree analysis and
consequentially trigger fallback to the SSAUpdater promotion.
In theory this would allow the pass to re-use a domtree if one happened
to be available even when run in a mode that doesn't require it. In
practice, it lets us have a single pass rather than two which was
simpler for me to wrap my head around.
There is a hidden flag to force the use of the SSAUpdater code path for
the purpose of testing. The primary testing strategy is just to run the
existing tests through that path. One notable difference is that it has
custom code to handle lifetime markers, and one of the tests has been
enhanced to exercise that code.
This has survived a bootstrap and the test suite without serious
correctness issues, however my run of the test suite produced *very*
alarming performance numbers. I don't entirely understand or trust them
though, so more investigation is on-going.
To aid my understanding of the performance impact of the new SROA now
that it runs throughout the optimization pipeline, I'm enabling it by
default in this commit, and will disable it again once the LNT bots have
picked up one iteration with it. I want to get those bots (which are
much more stable) to evaluate the impact of the change before I jump to
any conclusions.
NOTE: Several Clang tests will fail because they run -O3 and check the
result's order of output. They'll go back to passing once I disable it
again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163965 91177308-0d34-0410-b5e6-96231b3b80d8
destination.
Updated previous implementation to fix a case not covered:
// PBI: br i1 %x, TrueDest, BB
// BI: br i1 %y, TrueDest, FalseDest
The other case was handled correctly.
// PBI: br i1 %x, BB, FalseDest
// BI: br i1 %y, TrueDest, FalseDest
Also tried to use 64-bit arithmetic instead of APInt with scale to simplify the
computation. Let me know if you have other opinions about this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163954 91177308-0d34-0410-b5e6-96231b3b80d8
the default target of the first switch is not the basic block the second switch
is in (PredDefault != BB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163916 91177308-0d34-0410-b5e6-96231b3b80d8
This is essentially a ground up re-think of the SROA pass in LLVM. It
was initially inspired by a few problems with the existing pass:
- It is subject to the bane of my existence in optimizations: arbitrary
thresholds.
- It is overly conservative about which constructs can be split and
promoted.
- The vector value replacement aspect is separated from the splitting
logic, missing many opportunities where splitting and vector value
formation can work together.
- The splitting is entirely based around the underlying type of the
alloca, despite this type often having little to do with the reality
of how that memory is used. This is especially prevelant with unions
and base classes where we tail-pack derived members.
- When splitting fails (often due to the thresholds), the vector value
replacement (again because it is separate) can kick in for
preposterous cases where we simply should have split the value. This
results in forming i1024 and i2048 integer "bit vectors" that
tremendously slow down subsequnet IR optimizations (due to large
APInts) and impede the backend's lowering.
The new design takes an approach that fundamentally is not susceptible
to many of these problems. It is the result of a discusison between
myself and Duncan Sands over IRC about how to premptively avoid these
types of problems and how to do SROA in a more principled way. Since
then, it has evolved and grown, but this remains an important aspect: it
fixes real world problems with the SROA process today.
First, the transform of SROA actually has little to do with replacement.
It has more to do with splitting. The goal is to take an aggregate
alloca and form a composition of scalar allocas which can replace it and
will be most suitable to the eventual replacement by scalar SSA values.
The actual replacement is performed by mem2reg (and in the future
SSAUpdater).
The splitting is divided into four phases. The first phase is an
analysis of the uses of the alloca. This phase recursively walks uses,
building up a dense datastructure representing the ranges of the
alloca's memory actually used and checking for uses which inhibit any
aspects of the transform such as the escape of a pointer.
Once we have a mapping of the ranges of the alloca used by individual
operations, we compute a partitioning of the used ranges. Some uses are
inherently splittable (such as memcpy and memset), while scalar uses are
not splittable. The goal is to build a partitioning that has the minimum
number of splits while placing each unsplittable use in its own
partition. Overlapping unsplittable uses belong to the same partition.
This is the target split of the aggregate alloca, and it maximizes the
number of scalar accesses which become accesses to their own alloca and
candidates for promotion.
Third, we re-walk the uses of the alloca and assign each specific memory
access to all the partitions touched so that we have dense use-lists for
each partition.
Finally, we build a new, smaller alloca for each partition and rewrite
each use of that partition to use the new alloca. During this phase the
pass will also work very hard to transform uses of an alloca into a form
suitable for promotion, including forming vector operations, speculating
loads throguh PHI nodes and selects, etc.
After splitting is complete, each newly refined alloca that is
a candidate for promotion to a scalar SSA value is run through mem2reg.
There are lots of reasonably detailed comments in the source code about
the design and algorithms, and I'm going to be trying to improve them in
subsequent commits to ensure this is well documented, as the new pass is
in many ways more complex than the old one.
Some of this is still a WIP, but the current state is reasonbly stable.
It has passed bootstrap, the nightly test suite, and Duncan has run it
successfully through the ACATS and DragonEgg test suites. That said, it
remains behind a default-off flag until the last few pieces are in
place, and full testing can be done.
Specific areas I'm looking at next:
- Improved comments and some code cleanup from reviews.
- SSAUpdater and enabling this pass inside the CGSCC pass manager.
- Some datastructure tuning and compile-time measurements.
- More aggressive FCA splitting and vector formation.
Many thanks to Duncan Sands for the thorough final review, as well as
Benjamin Kramer for lots of review during the process of writing this
pass, and Daniel Berlin for reviewing the data structures and algorithms
and general theory of the pass. Also, several other people on IRC, over
lunch tables, etc for lots of feedback and advice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163883 91177308-0d34-0410-b5e6-96231b3b80d8
a pair of switch/branch where both depend on the value of the same variable and
the default case of the first switch/branch goes to the second switch/branch.
Code clean up and fixed a few issues:
1> handling the case where some cases of the 2nd switch are invalidated
2> correctly calculate the weight for the 2nd switch when it is a conditional eq
Testing case is modified from Alastair's original patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163635 91177308-0d34-0410-b5e6-96231b3b80d8
The lookup tables did not get built in a deterministic order.
This makes them get built in the order that the corresponding phi nodes
were found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163305 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a transformation to SimplifyCFG that attemps to turn switch
instructions into loads from lookup tables. It works on switches that
are only used to initialize one or more phi nodes in a common successor
basic block, for example:
int f(int x) {
switch (x) {
case 0: return 5;
case 1: return 4;
case 2: return -2;
case 5: return 7;
case 6: return 9;
default: return 42;
}
This speeds up the code by removing the hard-to-predict jump, and
reduces code size by removing the code for the jump targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163302 91177308-0d34-0410-b5e6-96231b3b80d8
switch, make sure we include the value for the cases when calculating edge
value from switch to the default destination.
rdar://12241132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163270 91177308-0d34-0410-b5e6-96231b3b80d8
pointers-to-strong-pointers may be in play. These can lead to retains and
releases happening in unstructured ways, foiling the optimizer. This fixes
rdar://12150909.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163180 91177308-0d34-0410-b5e6-96231b3b80d8
Scan the body of the loop and find instructions that may trap.
Use this information when deciding if it is safe to hoist or sink instructions.
Notice that we can optimize the search of instructions that may throw in the case of nested loops.
rdar://11518836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163132 91177308-0d34-0410-b5e6-96231b3b80d8
This code used to only handle malloc-like calls, which do not read memory.
r158919 changed it to check isNoAliasFn(), which includes strdup-like and
realloc-like calls, but it was not checking for dependencies on the memory
read by those calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163106 91177308-0d34-0410-b5e6-96231b3b80d8
We update until we hit a fixpoint. This is probably slow but also
slightly simplifies the code. It should also fix the occasional
invalid domtrees observed when building with expensive checking.
I couldn't find a case where this had a measurable slowdown, but
if someone finds a pathological case where it does we may have
to find a cleverer way of updating dominators here.
Thanks to Duncan for the test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163091 91177308-0d34-0410-b5e6-96231b3b80d8
The old PHI updating code in loop-rotate was replaced with SSAUpdater a while
ago, it has no problems with comples PHIs. What had to be fixed is detecting
whether a loop was already rotated and updating dominators when multiple exits
were present.
This change increases overall code size a bit, mostly due to additional loop
unrolling opportunities. Passes test-suite and selfhost with -verify-dom-info.
Fixes PR7447.
Thanks to Andy for the input on the domtree updating code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162912 91177308-0d34-0410-b5e6-96231b3b80d8
This disables malloc-specific optimization when -fno-builtin (or -ffreestanding)
is specified. This has been a problem for a long time but became more severe
with the recent memory builtin improvements.
Since the memory builtin functions are used everywhere, this required passing
TLI in many places. This means that functions that now have an optional TLI
argument, like RecursivelyDeleteTriviallyDeadFunctions, won't remove dead
mallocs anymore if the TLI argument is missing. I've updated most passes to do
the right thing.
Fixes PR13694 and probably others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162841 91177308-0d34-0410-b5e6-96231b3b80d8
