because of the inside-out run of LoopSimplify in the LoopPassManager and
the fact that LoopSimplify couldn't be "preserved" across two
independent LoopPassManagers.
Anyways, in that case, IndVars wasn't correctly preserving an LCSSA PHI
node because it thought it was rewriting (via SCEV) the incoming value
to a loop invariant value. While it may well be invariant for the
current loop, it may be rewritten in terms of an enclosing loop's
values. This in and of itself is fine, as the LCSSA PHI node in the
enclosing loop for the inner loop value we're rewriting will have its
own LCSSA PHI node if used outside of the enclosing loop. With me so
far?
Well, the current loop and the enclosing loop may share an exiting
block and exit block, and when they do they also share LCSSA PHI nodes.
In this case, its not valid to RAUW through the LCSSA PHI node.
Expected crazy test included.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200372 91177308-0d34-0410-b5e6-96231b3b80d8
function and a FunctionPass.
This has many benefits. The motivating use case was to be able to
compute function analysis passes *after* running LoopSimplify (to avoid
invalidating them) and then to run other passes which require
LoopSimplify. Specifically passes like unrolling and vectorization are
critical to wire up to BranchProbabilityInfo and BlockFrequencyInfo so
that they can be profile aware. For the LoopVectorize pass the only
things in the way are LoopSimplify and LCSSA. This fixes LoopSimplify
and LCSSA is next on my list.
There are also a bunch of other benefits of doing this:
- It is now very feasible to make more passes *preserve* LoopSimplify
because they can simply run it after changing a loop. Because
subsequence passes can assume LoopSimplify is preserved we can reduce
the runs of this pass to the times when we actually mutate a loop
structure.
- The new pass manager should be able to more easily support loop passes
factored in this way.
- We can at long, long last observe that LoopSimplify is preserved
across SCEV. This *halves* the number of times we run LoopSimplify!!!
Now, getting here wasn't trivial. First off, the interfaces used by
LoopSimplify are all over the map regarding how analysis are updated. We
end up with weird "pass" parameters as a consequence. I'll try to clean
at least some of this up later -- I'll have to have it all clean for the
new pass manager.
Next up I discovered a really frustrating bug. LoopUnroll *claims* to
preserve LoopSimplify. That's actually a lie. But the way the
LoopPassManager ends up running the passes, it always ran LoopSimplify
on the unrolled-into loop, rectifying this oversight before any
verification could kick in and point out that in fact nothing was
preserved. So I've added code to the unroller to *actually* simplify the
surrounding loop when it succeeds at unrolling.
The only functional change in the test suite is that we now catch a case
that was previously missed because SCEV and other loop transforms see
their containing loops as simplified and thus don't miss some
opportunities. One test case has been converted to check that we catch
this case rather than checking that we miss it but at least don't get
the wrong answer.
Note that I have #if-ed out all of the verification logic in
LoopSimplify! This is a temporary workaround while extracting these bits
from the LoopPassManager. Currently, there is no way to have a pass in
the LoopPassManager which preserves LoopSimplify along with one which
does not. The LPM will try to verify on each loop in the nest that
LoopSimplify holds but the now-Function-pass cannot distinguish what
loop is being verified and so must try to verify all of them. The inner
most loop is clearly no longer simplified as there is a pass which
didn't even *attempt* to preserve it. =/ Once I get LCSSA out (and maybe
LoopVectorize and some other fixes) I'll be able to re-enable this check
and catch any places where we are still failing to preserve
LoopSimplify. If this causes problems I can back this out and try to
commit *all* of this at once, but so far this seems to work and allow
much more incremental progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199884 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't seem to have actually broken anything. It was paranoia
on my part. Trying again now that bots are more stable.
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198678 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198654 91177308-0d34-0410-b5e6-96231b3b80d8
When widening an IV to remove s/zext, we generally try to eliminate
the original narrow IV. However, LCSSA phi nodes outside the loop were
still using the original IV. Clean this up more aggressively to avoid
redundancy in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198338 91177308-0d34-0410-b5e6-96231b3b80d8
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197926 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Michele Scandale!
Rewrite of the functions used to compute the backedge taken count of a
loop on LT and GT comparisons.
I decided to split the handling of LT and GT cases becasue the trick
"a > b == -a < -b" in some cases prevents the trip count computation
due to the multiplication by -1 on the two operands of the
comparison. This issue comes from the conservative computation of
value range of SCEVs: taking the negative SCEV of an expression that
have a small positive range (e.g. [0,31]), we would have a SCEV with a
fullset as value range.
Indeed, in the new rewritten function I tried to better handle the
maximum backedge taken count computation when MAX/MIN expression are
used to handle the cases where no entry guard is found.
Some test have been modified in order to check the new value correctly
(I manually check them and reasoning on possible overflow the new
values seem correct).
I finally added a new test case related to the multiplication by -1
issue on GT comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194116 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
against a constant."
This reverts commit r186107. It didn't handle wrapping arithmetic in the
loop correctly and thus caused the following C program to count from
0 to UINT64_MAX instead of from 0 to 255 as intended:
#include <stdio.h>
int main() {
unsigned char first = 0, last = 255;
do { printf("%d\n", first); } while (first++ != last);
}
Full test case and instructions to reproduce with just the -indvars pass
sent to the original review thread rather than to r186107's commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186152 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Michele Scandale!
Adds a special handling of the case where, during the loop exit
condition rewriting, the exit value is a constant of bitwidth lower
than the type of the induction variable: instead of introducing a
trunc operation in order to match correctly the operand types, it
allows to convert the constant value to an equivalent constant,
depending on the initial value of the induction variable and the trip
count, in order have an equivalent comparison between the induction
variable and the new constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186107 91177308-0d34-0410-b5e6-96231b3b80d8
IndVarSimplify is willing to move divide instructions outside of their
loop bodies if they are invariant of the loop. However, it may not be
safe to expand them if we do not know if they can trap.
Instead, check to see if it is not safe to expand the instruction and
skip the expansion.
This fixes PR16041.
Testcase by Rafael Ávila de Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183239 91177308-0d34-0410-b5e6-96231b3b80d8
- it is trivially known to be used inside the loop in a way that can not be optimized away
- there is no use outside of the loop which can take advantage of the computation hoisting
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177432 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopSimplify bug is pretty harmless because the loop goes from unanalyzable
to analyzable but the LCSSA bug is very nasty. It only comes into play with a
specific order of the LoopPassManager worklist and can cause actual
miscompilations, when a SCEV refers to a value that has been replaced with PHI
node. SCEVExpander may then insert code into the wrong place, either violating
domination or randomly miscompiling stuff.
Comes with an extensive test case reduced from the test-suite with
bugpoint+SCEVValidator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166787 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR13371: indvars pass incorrectly substitutes 'undef' values.
I do not like this fix. It's needed until/unless the meaning of undef
changes. It attempts to be complete according to the IR spec, but I
don't have much confidence in the implementation given the difficulty
testing undefined behavior. Worse, this invalidates some of my
hard-fought work on indvars and LSR to optimize pointer induction
variables. It results benchmark regressions, which I'll track
internally. On x86_64 no LTO I see:
-3% huffbench
-3% 400.perlbench
-8% fhourstones
My only suggestion for recovering is to change the meaning of
undef. If we could trust an arbitrary instruction to produce a some
real value that can be manipulated (e.g. incremented) according to
non-undef rules, then this case could be easily handled with SCEV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160421 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
This also required making recursive simplifications until
nothing changes or a hard limit (currently 3) is hit.
With the simplification in place indvars can canonicalize
loops of the form
for (unsigned i = 0; i < a-b; ++i)
into
for (unsigned i = 0; i != a-b; ++i)
which used to fail because SCEV created a weird umax expr
for the backedge taken count.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157701 91177308-0d34-0410-b5e6-96231b3b80d8
The right way to check for a binary operation is
cast<BinaryOperator>. The original check: cast<Instruction> &&
numOperands() == 2 would match phi "instructions", leading to an
infinite loop in extreme corner case: a useless phi with operands
[self, constant] that prior optimization passes failed to remove,
being used in the loop by another useless phi, in turn being used by an
lshr or udiv.
Fixes PR11350: runaway iteration assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144935 91177308-0d34-0410-b5e6-96231b3b80d8
We've been hitting asserts in this code due to the many supported
combintions of modes (iv-rewrite/no-iv-rewrite) and IV types. This
second rewrite of the code attempts to deal with these cases systematically.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143546 91177308-0d34-0410-b5e6-96231b3b80d8
