Commit Graph

107 Commits

Author SHA1 Message Date
Reid Kleckner
fad8d818db musttail: Don't eliminate varargs packs if there is a forwarding call
Also clean up and beef up this grep test for the feature.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216425 91177308-0d34-0410-b5e6-96231b3b80d8
2014-08-26 00:59:51 +00:00
David Majnemer
39a09d2b7c IR: Change inalloca's grammar a bit
The grammar for LLVM IR is not well specified in any document but seems
to obey the following rules:

 - Attributes which have parenthesized arguments are never preceded by
   commas.  This form of attribute is the only one which ever has
   optional arguments.  However, not all of these attributes support
   optional arguments: 'thread_local' supports an optional argument but
   'addrspace' does not.  Interestingly, 'addrspace' is documented as
   being a "qualifier".  What constitutes a qualifier?  I cannot find a
   definition.

 - Some attributes use a space between the keyword and the value.
   Examples of this form are 'align' and 'section'.  These are always
   preceded by a comma.

 - Otherwise, the attribute has no argument.  These attributes do not
   have a preceding comma.

Sometimes an attribute goes before the instruction, between the
instruction and it's type, or after it's type.  'atomicrmw' has
'volatile' between the instruction and the type while 'call' has 'tail'
preceding the instruction.

With all this in mind, it seems most consistent for 'inalloca' on an
'inalloca' instruction to occur before between the instruction and the
type.  Unlike the current formulation, there would be no preceding
comma.  The combination 'alloca inalloca' doesn't look particularly
appetizing, perhaps a better spelling of 'inalloca' is down the road.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203376 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-09 06:41:58 +00:00
Nico Rieck
268e96a8a6 Fix broken CHECK lines
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201479 91177308-0d34-0410-b5e6-96231b3b80d8
2014-02-16 07:31:05 +00:00
Reid Kleckner
81558937d7 inalloca: Don't remove dead arguments in the presence of inalloca args
It disturbs the layout of the parameters in memory and registers,
leading to problems in the backend.

The plan for optimizing internal inalloca functions going forward is to
essentially SROA the argument memory and demote any captured arguments
(things that aren't trivially written by a load or store) to an indirect
pointer to a static alloca.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200717 91177308-0d34-0410-b5e6-96231b3b80d8
2014-02-03 20:42:49 +00:00
Manman Ren
bec50063a5 Debug Info: update testing cases to specify the debug info version number.
We are going to drop debug info without a version number or with a different
version number, to make sure we don't crash when we see bitcode files with
different debug info metadata format.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195504 91177308-0d34-0410-b5e6-96231b3b80d8
2013-11-22 21:49:45 +00:00
Shuxin Yang
e0409098ae Fix a bug in Dead Argument Elimination.
If a function seen at compile time is not necessarily the one linked to
the binary being built, it is illegal to change the actual arguments
passing to it. 

  e.g. 
   --------------------------
   void foo(int lol) {
     // foo() has linkage satisifying isWeakForLinker()
     // "lol" is not used at all.
   }

   void bar(int lo2) {
      // xform to foo(undef) is illegal, as compiler dose not know which
      // instance of foo() will be linked to the the binary being built.
      foo(lol2); 
   }
  -----------------------------

  Such functions can be captured by isWeakForLinker(). NOTE that
mayBeOverridden() is insufficient for this purpose as it dosen't include
linkage types like AvailableExternallyLinkage and LinkOnceODRLinkage.
Take link_odr* as an example, it indicates a set of *EQUIVALENT* globals
that can be merged at link-time. However, the semantic of 
*EQUIVALENT*-functions includes parameters. Changing parameters breaks
the assumption.

  Thank John McCall for help, especially for the explanation of subtle
difference between linkage types.

  rdar://11546243


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192302 91177308-0d34-0410-b5e6-96231b3b80d8
2013-10-09 17:21:44 +00:00
Manman Ren
1ed2e1fb92 Debug Info Testing: update context from empty string to null.
Context should be either null or MDNode.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190267 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-08 03:11:54 +00:00
Manman Ren
1307103dff Debug Info Testing: updated to use NULL instead of "i32 0" in a few fields.
Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom),
field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram
(Context, Type, ContainingType).


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190205 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-06 21:03:58 +00:00
Manman Ren
6e3cd0ebe2 Debug Info: add an identifier field to DICompositeType.
DICompositeType will have an identifier field at position 14. For now, the
field is set to null in DIBuilder.
For DICompositeTypes where the template argument field (the 13th field)
was optional, modify DIBuilder to make sure the template argument field is set.
Now DICompositeType has 15 fields.

Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode.
Update verifier to check that DICompositeType has 15 fields and the last
field is null or a MDString.

Update testing cases to include an extra field for DICompositeType.
The identifier field will be used by type uniquing so a front end can
genearte a DICompositeType with a unique identifer.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189282 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-26 22:39:55 +00:00
Daniel Dunbar
24ec2e5a72 [tests] Cleanup initialization of test suffixes.
- Instead of setting the suffixes in a bunch of places, just set one master
   list in the top-level config. We now only modify the suffix list in a few
   suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).

 - Aside from removing the need for a bunch of lit.local.cfg files, this enables
   4 tests that were inadvertently being skipped (one in
   Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
   CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
   XFAILED).

 - This commit also fixes a bunch of config files to use config.root instead of
   older copy-pasted code.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-16 00:37:11 +00:00
Manman Ren
f40d578d7e Debug Info Finder|Verifier: handle DbgLoc attached to instructions.
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.

Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.

TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.

Re-apply r187609 with fix to pass ocaml binding. vmcore.ml generates a debug
location with scope being metadata !{}, in verifier we treat this as a null
scope.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187812 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-06 19:38:43 +00:00
Eric Christopher
be9f508aec Temporarily revert "Debug Info Finder|Verifier: handle DbgLoc attached to
instructions." in an attempt to bring back some bots.

This reverts commit r187609.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187638 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-02 00:49:44 +00:00
Manman Ren
f589eef864 Debug Info Finder|Verifier: handle DbgLoc attached to instructions.
Also remove checking of llvm.dbg.sp since it is not used in generating dwarf.

Current state of Finder:
DebugInfoFinder tries to list all debug info MDNodes used in a module. To
list debug info MDNodes used by an instruction, DebugInfoFinder provides
processDeclare, processValue and processLocation to handle DbgDeclareInst,
DbgValueInst and DbgLoc attached to instructions. processModule will go
through all DICompileUnits in llvm.dbg.cu and list debug info MDNodes
used by the CUs.

TODO:
1> Finder has a list of CUs, SPs, Types, Scopes and global variables. We
need to add a list of variables that are used by DbgDeclareInst and
DbgValueInst.
2> MDString fields should be null or isa<MDString> and MDNode fields should be
null or isa<MDNode>. We currently use empty string or int 0 to represent null.
3> Go though Verify functions and make sure that they check field types.
4> Clean up existing testing cases to remove llvm.dbg.sp and make sure each
testing case has a llvm.dbg.cu.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187609 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-01 20:52:39 +00:00
Manman Ren
d513b4033f Debug Info: update testing cases to pass verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187362 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-29 18:12:58 +00:00
Rafael Espindola
f204228b78 Current batch of -disable-debug-info-verifier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187130 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-25 17:16:05 +00:00
Rafael Espindola
094597171a add -disable-debug-info-verifier to 3 test to fix tests with pipefail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187064 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-24 18:44:10 +00:00
Stephen Lin
15bfd6d3ad Catch more CHECK that can be converted to CHECK-LABEL in Transforms for easier debugging. No functionality change.
This conversion was done with the following bash script:

  find test/Transforms -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    if ! grep -q "^; *RUN: *llc" $NAME; then
      TEMP=`mktemp -t temp`
      cp $NAME $TEMP
      sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
      while read FUNC; do
        sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
      done
      mv $TEMP $NAME
    fi
  done


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186269 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 01:50:49 +00:00
Stephen Lin
39f4e8d9cc Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change.
This update was done with the following bash script:

  find test/Transforms -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    if ! grep -q "^; *RUN: *llc" $NAME; then
      TEMP=`mktemp -t temp`
      cp $NAME $TEMP
      sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
      while read FUNC; do
        sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
      done
      mv $TEMP $NAME
    fi
  done


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 01:42:54 +00:00
Stephen Lin
55ec2218c4 Start using CHECK-LABEL in some tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186163 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 14:54:12 +00:00
Stephen Lin
3f4385a0b6 DeadArgumentElimination: keep return value on functions that have a live argument with the 'returned' attribute (rather than generate invalid IR); however, if both can be eliminated, both will be
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185290 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-30 20:26:21 +00:00
Derek Schuff
c06e5cf2e3 Fix DeleteDeadVarargs not to crash on functions referenced by BlockAddresses
This pass was assuming that if hasAddressTaken() returns false for a
function, the function's only uses are call sites.  That's not true
because there can be references by BlockAddresses too.

Fix the pass to handle this case.  Fix
BlockAddress::replaceUsesOfWithOnConstant() to allow a function's type
to be changed by RAUW'ing the function with a bitcast of the recreated
function.

Patch by Mark Seaborn.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183933 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-13 19:51:17 +00:00
Tim Northover
d84b17e157 Make DeadArgumentElimination more conservative on variadic functions
Variadic functions are particularly fragile in the face of ABI changes, so this
limits how much the pass changes them

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183625 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-09 02:17:27 +00:00
David Blaikie
c462db6d66 Revert "Revert "PR14606: debug info imported_module support""
This reverts commit r179840 with a fix to test/DebugInfo/two-cus-from-same-file.ll

I'm not sure why that test only failed on ARM & MIPS and not X86 Linux, even
though the debug info was clearly invalid on all of them, but this ought to fix
it.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179996 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-22 06:12:31 +00:00
Eric Christopher
41201ed06f Revert "PR14606: debug info imported_module support"
This reverts commit r179836 as it seems to have caused test failures.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179840 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-19 07:47:16 +00:00
David Blaikie
bcb81360a2 PR14606: debug info imported_module support
Adding another CU-wide list, in this case of imported_modules (since they
should be relatively rare, it seemed better to add a list where each element
had a "context" value, rather than add a (usually empty) list to every scope).
This takes care of DW_TAG_imported_module, but to fully address PR14606 we'll
need to expand this to cover DW_TAG_imported_declaration too.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179836 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-19 06:57:04 +00:00
David Blaikie
72dfb052ab Revert "Adding DIImportedModules to DIScopes."
This reverts commit 342d92c7a0.

Turns out we're going with a different schema design to represent
DW_TAG_imported_modules so we won't need this extra field.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178215 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-28 02:44:59 +00:00
David Blaikie
342d92c7a0 Adding DIImportedModules to DIScopes.
This is just the basic groundwork for supporting DW_TAG_imported_module but I
wanted to commit this before pushing support further into Clang or LLVM so that
this rather churny change is isolated from the rest of the work. The major
churn here is obviously adding another field (within the common DIScope prefix)
to all DIScopes (files, classes, namespaces, lexical scopes, etc). This should
be the last big churny change needed for DW_TAG_imported_module/using directive
support/PR14606.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178099 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-27 00:07:26 +00:00
David Blaikie
ebb5183a2f Remove unused field in DISubprogram
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177661 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-21 20:28:52 +00:00
David Blaikie
404ecce890 Remove unused field in DICompileUnit
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177590 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-20 22:34:33 +00:00
David Blaikie
b4cf0ab22b Split out filename & directory from DIFile to start generalizing over DIScopes
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177239 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-17 21:13:55 +00:00
David Blaikie
e0805a992d Remove the unused 4th operand for DIFile debug info metadata
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176983 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-13 22:05:21 +00:00
David Blaikie
de3077ae6b Refactor filename/directory in DICompileUnit into a DIFile
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176913 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-13 00:01:35 +00:00
David Blaikie
46561ce249 Remove unused "isMain" field from DICompileUnit
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176910 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-12 22:43:04 +00:00
David Blaikie
14891447ff Update debug info test cases with empty SplitDebugFilename field.
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.

The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176907 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-12 22:25:36 +00:00
Bill Wendling
351b7a10e2 Use references to attribute groups on the call/invoke instructions.
Listing all of the attributes for the callee of a call/invoke instruction is way
too much and makes the IR unreadable. Use references to attributes instead.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175877 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-22 09:09:42 +00:00
Bill Wendling
7ab6c76ad1 Modify the LLVM assembly output so that it uses references to represent function attributes.
This makes the LLVM assembly look better. E.g.:

     define void @foo() #0 { ret void }
     attributes #0 = { nounwind noinline ssp }


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175605 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-20 07:21:42 +00:00
Bill Wendling
595ef3e314 FileCheck-ize the tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174865 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-11 08:34:57 +00:00
David Blaikie
a8eefc7cc7 Remove the (apparently) unnecessary debug info metadata indirection.
The main lists of debug info metadata attached to the compile_unit had an extra
layer of metadata nodes they went through for no apparent reason. This patch
removes that (& still passes just as much of the GDB 7.5 test suite). If anyone
can show evidence as to why these extra metadata nodes are there I'm open to
reverting this patch & documenting why they're there.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174266 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-02 05:56:24 +00:00
Dmitri Gribenko
fbfb1b286f Tests: rewrite 'opt ... %s' to 'opt ... < %s' so that opt does not emit a ModuleID
This is done to avoid odd test failures, like the one fixed in r171243.

My previous regex was not good enough to find these.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171343 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-01 13:57:25 +00:00
Dmitri Gribenko
b4912b9dcc Tests: rewrite 'opt ... %s' to 'opt ... < %s' so that opt does not emit a ModuleID
This is done to avoid odd test failures, like the one fixed in r171243.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171246 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-30 01:28:40 +00:00
Alexey Samsonov
e97a3a4b4f Fix PR14016.
DeadArgumentElimination pass can replace one LLVM function with another,
invalidating a pointer stored in debug info metadata entry for this function.
To fix this, we collect debug info descriptors for functions before
running a DeadArgumentElimination pass and "patch" pointers in metadata nodes
if we replace a function.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165490 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-09 08:13:15 +00:00
Chandler Carruth
1de43ede89 Fix the remaining TCL-style quotes found in the testsuite. This is
another mechanical change accomplished though the power of terrible Perl
scripts.

I have manually switched some "s to 's to make escaping simpler.

While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.

Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-02 19:09:46 +00:00
Chandler Carruth
4177e6fff5 Convert all tests using TCL-style quoting to use shell-style quoting.
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.

If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.

Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.

Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-02 12:47:22 +00:00
Eli Bendersky
0f0c411079 Replace all instances of dg.exp file with lit.local.cfg, since all tests are run with LIT now and now Dejagnu. dg.exp is no longer needed.
Patch reviewed by Daniel Dunbar. It will be followed by additional cleanup patches.




git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150664 91177308-0d34-0410-b5e6-96231b3b80d8
2012-02-16 06:28:33 +00:00
Chris Lattner
d2bf432b2b Upgrade syntax of tests using volatile instructions to use 'load volatile' instead of 'volatile load', which is archaic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145171 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-27 06:54:59 +00:00
Bill Wendling
aeaa9a8b25 Update some tests to the new EH scheme.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138925 91177308-0d34-0410-b5e6-96231b3b80d8
2011-09-01 00:58:03 +00:00
Eli Friedman
f03bb260c9 Move "atomic" and "volatile" designations on instructions after the opcode
of the instruction.

Note that this change affects the existing non-atomic load and store
instructions; the parser now accepts both forms, and the change is noted
in the release notes.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137527 91177308-0d34-0410-b5e6-96231b3b80d8
2011-08-12 22:50:01 +00:00
Chris Lattner
1afcace3a3 Land the long talked about "type system rewrite" patch. This
patch brings numerous advantages to LLVM.  One way to look at it
is through diffstat:
 109 files changed, 3005 insertions(+), 5906 deletions(-)

Removing almost 3K lines of code is a good thing.  Other advantages
include:

1. Value::getType() is a simple load that can be CSE'd, not a mutating
   union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
   uniques them.  This means that the compiler doesn't merge them structurally
   which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
   struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
   in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead 
   "const Type *" everywhere.

Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.  
"LLVM 3.0" is the right time to do this.

There are still some cleanups pending after this, this patch is large enough
as-is.




git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134829 91177308-0d34-0410-b5e6-96231b3b80d8
2011-07-09 17:41:24 +00:00
Chris Lattner
26b0000166 manually upgrade a bunch of tests to modern syntax, and remove some that
are either unreduced or only test old syntax.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133228 91177308-0d34-0410-b5e6-96231b3b80d8
2011-06-17 03:14:27 +00:00
Nick Lewycky
c7e38e8f3f Fix grammar in test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131831 91177308-0d34-0410-b5e6-96231b3b80d8
2011-05-22 01:16:00 +00:00