root path to which object files managed by the LLIObjectCache instance should be
written. This option defaults to "", in which case objects are cached in the
same directory as the bitcode they are derived from.
The load-object-a.ll test has been rewritten to use this option to support
testing in environments where the test directory is not writable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198852 91177308-0d34-0410-b5e6-96231b3b80d8
Rename bytecode to opcodes to make it more clear. Change an impossible case to
llvm_unreachable instead. Avoid allocation of a buffer by modifying the
PrintOpcodes iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198848 91177308-0d34-0410-b5e6-96231b3b80d8
operand into the Value interface just like the core print method is.
That gives a more conistent organization to the IR printing interfaces
-- they are all attached to the IR objects themselves. Also, update all
the users.
This removes the 'Writer.h' header which contained only a single function
declaration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198836 91177308-0d34-0410-b5e6-96231b3b80d8
I believe the bot failures on linux systems were due to overestimating the
alignment of object-files within archives, which are only guaranteed to be
two-byte aligned. I have reduced the alignment in
RuntimeDyldELF::createObjectImageFromFile accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198737 91177308-0d34-0410-b5e6-96231b3b80d8
This adds some preliminary support for decoding ARM EHABI unwinding information.
The major functionality that remains from complete support is bytecode
translation.
Each Unwind Index Table is printed out as a separate entity along with its
section index, name, offset, and entries.
Each entry lists the function address, and if possible, the name, of the
function to which it corresponds. The encoding model, personality routine or
index, and byte code is also listed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198734 91177308-0d34-0410-b5e6-96231b3b80d8
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198688 91177308-0d34-0410-b5e6-96231b3b80d8
(unittests/ExecutionEngine/JIT/CMakeLists.txt is still missing for now, since
it handles export files in a strange way: It generates a .exports file from a
.def file instead of the other way round.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198183 91177308-0d34-0410-b5e6-96231b3b80d8
The cmake build didn't support EXPORTED_SYMBOL_FILE. Instead, it had a
Windows-only implementation in tools/lto/CMakeLists.txt, a linux-only
implementation in tools/gold/CMakeLists.txt, and a darwin-only implementation
in tools/clang/tools/libclang/CMakeLists.txt.
This attempts to consolidate these one-offs into a single place. Clients can now
just set LLVM_EXPORTED_SYMBOL_FILE and things (hopefully) Just Work, like in
the make build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198136 91177308-0d34-0410-b5e6-96231b3b80d8
This reduces the size of clang-format from 22 MB to 1.8 MB, diagtool goes from
21 MB to 2.8 MB, libclang.so goes from 29 MB to 20 MB, etc. The size of the
bin/ folder shrinks from 270 MB to 200 MB.
Targets that support plugins and don't already use EXPORTED_SYMBOL_FILE
(which libclang and libLTO already do) can set NO_DEAD_STRIP to opt out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198087 91177308-0d34-0410-b5e6-96231b3b80d8
Although --system-libs is expected to use after --libs, it can be used alone.
$ bin/llvm-config --ldflags
-L/path/to/llvm/objroot/lib
$ bin/llvm-config --libs object
-lLLVMObject -lLLVMSupport
$ bin/llvm-config --system-libs
(Blank line. "all" is assumed but nothing is printed.)
-lrt -ldl -ltinfo -lpthread -lz
$ bin/llvm-config --ldflags --libs --system-libs object
-L/path/to/llvm/objroot/lib
-lLLVMObject -lLLVMSupport
-lrt -ldl -ltinfo -lpthread -lz
It is reimplementation of r197380, and workaround for PR3347 and PR8449.
FIXME: Each LLVM component may have its dependent system libs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197664 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197633 91177308-0d34-0410-b5e6-96231b3b80d8
This will cause llvm-cov to output branch counts instead of branch
probabilities. -b must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197594 91177308-0d34-0410-b5e6-96231b3b80d8
With llvm-config.exe --bindir --libdir --build-mode, on Visual Studio 2010,
In build tree:
(OBJ_ROOT)/bin/MinSizeRel
(OBJ_ROOT)/lib/MinSizeRel
MinSizeRel
In installed tree:
(INSTALL_PREFIX)/bin
(INSTALL_PREFIX)/lib
MinSizeRel
This is enhancements since r196283.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197467 91177308-0d34-0410-b5e6-96231b3b80d8
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197432 91177308-0d34-0410-b5e6-96231b3b80d8
Each of them forms like;
${CMAKE_BINARY_DIR}/bin/${CMAKE_CFG_INTDIR}
${CMAKE_BINARY_DIR}/lib/${CMAKE_CFG_INTDIR}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197394 91177308-0d34-0410-b5e6-96231b3b80d8
FIXME: Host's llvm-config is not generated. It's for target's.
Host tools, aka "BuildTools", in utils, do not require llvm-config to build.
For example with --host=i686-pc-mingw32 --build=linux,
$ BuildTools/Release+Asserts/bin/llvm-config --libs support
-lLLVMSupport
-lpthread -lshell32 -lpsapi -limagehlp -lm
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197382 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM libs are printed in the first line, and system libs are printed in the next line.
$ bin/llvm-config --libs object
-lLLVMObject -lLLVMSupport
-lrt -ldl -ltinfo -lpthread -lz
It is workaround for PR3347 and PR8449.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197380 91177308-0d34-0410-b5e6-96231b3b80d8
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197198 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196856 91177308-0d34-0410-b5e6-96231b3b80d8
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.
This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.
The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.
Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196537 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196471 91177308-0d34-0410-b5e6-96231b3b80d8
