make check in a non-clean directory causes it to fail (for example when running
make check twice), since execution counts will differ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80362 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple AliasAnalysis implementation which works by making
ScalarEvolution queries. ScalarEvolution has a more complete understanding
of arithmetic than BasicAA's collection of ad-hoc checks, so it handles
some cases that BasicAA misses, for example p[i] and p[i+1] within the
same iteration of a loop.
This is currently experimental. It may be that the main use for this pass
will be to help find cases where BasicAA can be profitably extended, or
to help in the development of the overall AliasAnalysis infrastructure,
however it's also possible that it could grow up to become a directly
useful pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80098 91177308-0d34-0410-b5e6-96231b3b80d8
the step value as unsigned, the start value and the addrec
itself still need to be treated as signed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77078 91177308-0d34-0410-b5e6-96231b3b80d8
(x pred y) with more thorough code that does more complete canonicalization
before resorting to range checks. This helps it find more cases where
the canonicalized expressions match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76671 91177308-0d34-0410-b5e6-96231b3b80d8
For now this only computes the allocated size of the memory pointed to by a
pointer, and offset a pointer from allocated pointer.
The actual checkLimits part will come later, after another round of review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75657 91177308-0d34-0410-b5e6-96231b3b80d8
than a wider one, before trying to compare their contents which will crash
if their sizes are different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74792 91177308-0d34-0410-b5e6-96231b3b80d8
blocks, and also exit blocks with multiple conditions (combined
with (bitwise) ands and ors). It's often infeasible to compute an
exact trip count in such cases, but a useful upper bound can often
be found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73866 91177308-0d34-0410-b5e6-96231b3b80d8
If C is a single bit and the and gets analyzed as a truncate and
zero-extend, the xor can be represnted as an add.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73664 91177308-0d34-0410-b5e6-96231b3b80d8
that gets recognized with a SCEVZeroExtendExpr must be an And
with a low-bits mask. With r73540, this is no longer the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73594 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
beyond their associated static array type.
I believe that this fixes a legitimate bug, because BasicAliasAnalysis
already has code to check for this condition that works for non-constant
indices, however it was missing the case of constant indices. With this
change, it checks for both.
This fixes PR4267, and miscompiles of SPEC 188.ammp and 464.h264.href.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72451 91177308-0d34-0410-b5e6-96231b3b80d8
add-recurrence to be exposed. Add a new SCEV folding rule to
help simplify expressions in the presence of these extra truncs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71264 91177308-0d34-0410-b5e6-96231b3b80d8
artificial "ptrtoint", as it tends to clutter up complicated
expressions. The cast operators now print both source and
destination types, which is usually sufficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70554 91177308-0d34-0410-b5e6-96231b3b80d8
compute an upper-bound value for the trip count, in addition to
the actual trip count. Use this to allow getZeroExtendExpr and
getSignExtendExpr to fold casts in more cases.
This may eventually morph into a more general value-range
analysis capability; there are certainly plenty of places where
more complete value-range information would allow more folding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70509 91177308-0d34-0410-b5e6-96231b3b80d8
(sext i8 {-128,+,1} to i64) to i64 {-128,+,1}, where the iteration
crosses from negative to positive, but is still safe if the trip
count is within range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70421 91177308-0d34-0410-b5e6-96231b3b80d8
print sext, zext, and trunc, instead of signextend, zeroextend,
and truncate, respectively, for consistency with the main IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70405 91177308-0d34-0410-b5e6-96231b3b80d8
type to truncate to should be the number of bits of the value that are
preserved, not the number that are clobbered with sign-extension.
This fixes regressions in ldecod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69704 91177308-0d34-0410-b5e6-96231b3b80d8
to more accurately describe what it does. Expand its doxygen comment
to describe what the backedge-taken count is and how it differs
from the actual iteration count of the loop. Adjust names and
comments in associated code accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65382 91177308-0d34-0410-b5e6-96231b3b80d8
couldn't ever be the return of call instruction. However, it's quite possible
that said local allocation is itself the return of a function call. That's
what malloc and calloc are for, actually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64442 91177308-0d34-0410-b5e6-96231b3b80d8
The problematic part of this patch is that we were out of attribute bits,
requiring some fancy bit hacking to make it fit (by shrinking alignment)
without breaking existing users or the file format.
This change will require users to rebuild llvm-gcc to match llvm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61239 91177308-0d34-0410-b5e6-96231b3b80d8
parallel, allowing it to decide that P/Q must alias if A/B
must alias in things like:
P = gep A, 0, i, 1
Q = gep B, 0, i, 1
This allows GVN to delete 62 more instructions out of 403.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60820 91177308-0d34-0410-b5e6-96231b3b80d8
indicate functions that allocate, such as operator new, or list::insert. The
actual definition is slightly less strict (for now).
No changes to the bitcode reader/writer, asm printer or verifier were needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59934 91177308-0d34-0410-b5e6-96231b3b80d8
Use it to safely handle less-than-or-equals-to exit conditions in loops. These
also occur when the loop exit branch is exit on true because SCEV inverses the
icmp predicate.
Use it again to handle non-zero strides, but only with an unsigned comparison
in the exit condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59528 91177308-0d34-0410-b5e6-96231b3b80d8
If this patch causes a performance regression for anyone, please let me know,
and it can be fixed in a different way with much more effort.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59384 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately this means removing one regression test
of GlobalsModRef because I couldn't work out how to
perform it without MarkModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56342 91177308-0d34-0410-b5e6-96231b3b80d8
can get the readnone/readonly attributes, and gives them it.
The plan is to remove markmodref (which did the same thing
by querying GlobalsModRef) and delete the analogous
functionality from GlobalsModRef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56341 91177308-0d34-0410-b5e6-96231b3b80d8
description says it does), not just when -analyze is
used as well. This means printing to stderr, so adjust
some tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56337 91177308-0d34-0410-b5e6-96231b3b80d8
its callers to emit a space character before calling it when a
space is needed.
This fixes several spurious whitespace issues in
ScalarEvolution's debug dumps. See the test changes for
examples.
This also fixes odd space-after-tab indentation in the output
for switch statements, and changes calls from being printed like
this:
call void @foo( i32 %x )
to this:
call void @foo(i32 %x)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56196 91177308-0d34-0410-b5e6-96231b3b80d8
(1) code left over from the days of ConstantPointerRef:
if a use of a function is a GlobalValue then that is
not considered a reason to add an edge from the external
node, even though the use may be as an initializer for
an externally visible global! There might be some point
to this behaviour when the use is by an alias (though the
code predated aliases by some centuries), but I think
PR2782 is a better way of handling that. (2) If function
F calls function G, and also G is a parameter to the
call, then an F->G edge is not added to the callgraph.
While this doesn't seem to matter much, adding such an
edge makes the callgraph more regular.
In addition, the new code should be faster as well as
simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55987 91177308-0d34-0410-b5e6-96231b3b80d8
doesNotAccessMemory, check doesNotAccessMemory
first, since otherwise functions may be
marked readonly rather than readnone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55697 91177308-0d34-0410-b5e6-96231b3b80d8
callgraph, when one member of a SCC calls another
then the analysis would drop to mod-ref because
there is (usually) no function info for the callee
yet; fix this. Teach the analysis about function
attributes, in particular the readonly attribute
(which requires being careful about globals).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55696 91177308-0d34-0410-b5e6-96231b3b80d8
continue past the first conditional branch when looking for a
relevant test. This helps it avoid using MAX expressions in
loop trip counts in more cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54697 91177308-0d34-0410-b5e6-96231b3b80d8
version uses a new algorithm for evaluating the binomial coefficients
which is significantly more efficient for AddRecs of more than 2 terms
(see the comments in the code for details on how the algorithm works).
It also fixes some bugs: it removes the arbitrary length restriction for
AddRecs, it fixes the silent generation of incorrect code for AddRecs
which require a wide calculation width, and it fixes an issue where we
were incorrectly truncating the iteration count too far when evaluating
an AddRec expression narrower than the induction variable.
There are still a few related issues I know of: I think there's
still an issue with the SCEVExpander expansion of AddRec in terms of
the width of the induction variable used. The hack to avoid generating
too-wide integers shouldn't be necessary; instead, the callers should be
considering the cost of the expansion before expanding it (in addition
to not expanding too-wide integers, we might not want to expand
expressions that are really expensive, especially when optimizing for
size; calculating an length-17 32-bit AddRec currently generates about 250
instructions of straight-line code on X86). Also, for long 32-bit
AddRecs on X86, CodeGen really sucks at scheduling the code. I'm planning on
filing follow-up PRs for these issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54332 91177308-0d34-0410-b5e6-96231b3b80d8
time applying to the implicit comparison in smin expressions. The
correct way to transform an inequality into the opposite
inequality, either signed or unsigned, is with a not expression.
I looked through the SCEV code, and I don't think there are any more
occurrences of this issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54194 91177308-0d34-0410-b5e6-96231b3b80d8
SGT exit condition. Essentially, the correct way to flip an inequality
in 2's complement is the not operator, not the negation operator.
That said, the difference only affects cases involving INT_MIN.
Also, enhance the pre-test search logic to be a bit smarter about
inequalities flipped with a not operator, so it can eliminate the smax
from the iteration count for simple loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54184 91177308-0d34-0410-b5e6-96231b3b80d8
force evaluation (ComputeIterationCountExhaustively) should be turned off.
It doesn't apply to trip-count2.ll because this file tests the brute force
evaluation.
The test for PR2364 (2008-05-25-NegativeStepToZero.ll) currently fails
showing that the patch for this bug doesn't work. I'll fix it in a few hours
with a patch for PR2088.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53792 91177308-0d34-0410-b5e6-96231b3b80d8
pointer derived from a local allocation, if the local allocation
never escapes, the pointers can't alias. This implements PR2436
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52301 91177308-0d34-0410-b5e6-96231b3b80d8
with code that was expecting different bit widths for different values.
Make getTruncateOrZeroExtend a method on ScalarEvolution, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52248 91177308-0d34-0410-b5e6-96231b3b80d8
is longer than the second one) should stop after finding one. Added break
instruction guarantees it. It also changes difference between offsets to
absolute value of this difference in the condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51875 91177308-0d34-0410-b5e6-96231b3b80d8
a potentially infinite loop, which is undesirable. Instead, test the LICM behavior
that we're really interested in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51177 91177308-0d34-0410-b5e6-96231b3b80d8
Parse reversed smax and umax as smin and umin and express them with negative
or binary-not SCEVs (which are really just subtract under the hood).
Parse 'xor %x, -1' as (-1 - %x).
Remove dead code (ConstantInt::get always returns a ConstantInt).
Don't use getIntegerSCEV(-1, Ty). The first value is an int, then it gets
passed into a uint64_t. Instead, create the -1 directly from
ConstantInt::getAllOnesValue().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47360 91177308-0d34-0410-b5e6-96231b3b80d8
variable (with step 1) and m is its final value. Then, the correct trip
count is SMAX(m,n)-n. Previously, we used SMAX(0,m-n), but m-n may
overflow and can't in general be interpreted as signed.
Patch by Nick Lewycky.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47007 91177308-0d34-0410-b5e6-96231b3b80d8
to the RHS. This simple change allows to compute loop iteration count
for loops with condition similar to the one in the testcase (which seems
to be quite common).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46959 91177308-0d34-0410-b5e6-96231b3b80d8
arbitrary iteration.
The patch:
1) changes SCEVSDivExpr into SCEVUDivExpr,
2) replaces PartialFact() function with BinomialCoefficient(); the
computations (essentially, the division) in BinomialCoefficient() are
performed with the apprioprate bitwidth necessary to avoid overflow;
unsigned division is used instead of the signed one.
Computations in BinomialCoefficient() require support from the code
generator for APInts. Currently, we use a hack rounding up the
neccessary bitwidth to the nearest power of 2. The hack is easy to turn
off in future.
One remaining issue: we assume the divisor of the binomial coefficient
formula can be computed accurately using 16 bits. It means we can handle
AddRecs of length up to 9. In future, we should use APInts to evaluate
the divisor.
Thanks to Nicholas for cooperation!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46955 91177308-0d34-0410-b5e6-96231b3b80d8
can't be aliased to other known objects. This allows us to know that byval
pointer args don't alias globals, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46315 91177308-0d34-0410-b5e6-96231b3b80d8
OnlyReadsMemoryFns tables are dead! We
get more, and more accurate, information
from gcc via the readnone and readonly
function attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44288 91177308-0d34-0410-b5e6-96231b3b80d8
is disabled in the sense that it will refuse to create one from a UDiv
instruction, until the code is better tested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44163 91177308-0d34-0410-b5e6-96231b3b80d8
Always pass the constant as the second parameter to HowManyLessThans.
Remove obsolete "isSigned" parameter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39893 91177308-0d34-0410-b5e6-96231b3b80d8
Remove && from the end of the lines to prevent tests from throwing run
lines into the background. Also, clean up places where the same command
is run multiple times by using a temporary file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36142 91177308-0d34-0410-b5e6-96231b3b80d8
functions and Tcl's just tickled with that. The fix is to give the "new"
test system a different interface function name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36022 91177308-0d34-0410-b5e6-96231b3b80d8
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35918 91177308-0d34-0410-b5e6-96231b3b80d8
Update these tests to not use the same name even though the type of the
value differs. After PR411 hits, type planes will be gone and it will be
illegal for a name to be used twice, regardless of type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33660 91177308-0d34-0410-b5e6-96231b3b80d8
Remove "target endian/pointersize" or add "target datalayout" to make
the test parse properly or set the datalayout because defaults changes.
For PR645:
Make global names use the @ prefix.
For llvm-upgrade changes:
Fix test cases or completely remove use of llvm-upgrade for test cases
that cannot survive the new renaming or upgrade capabilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33533 91177308-0d34-0410-b5e6-96231b3b80d8
Bye, Bye Booly. Remove the use of the bool type from non-upgraded test
cases and from grep expressions. The parser doesn't accept it and the
asm writer doesn't produce it any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33183 91177308-0d34-0410-b5e6-96231b3b80d8
Update the test suite to accommodate the change from signed integer types
to signless integer types. The changes were of only a few kinds:
1. Make sure llvm-upgrade is run on the source which does the bulk of the
changes automatically.
2. Change things like "grep 'int'" to "grep 'i32'"
3. In several tests bitcasting caused the same name to be reused in the
same type plane. These had to be manually fixed. The fix was (generally)
to leave the bitcast and provide the instruction with a new name. This
should not affect the semantics of the test. In a few cases, the
bitcasts were known to be superfluous and irrelevant to the test case
so they were removed.
4. One test case uses a bytecode file which needed to be updated to the
latest bytecode format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32789 91177308-0d34-0410-b5e6-96231b3b80d8
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31931 91177308-0d34-0410-b5e6-96231b3b80d8
Shrinkify LLVM's footprint by removing the analyze tool and moving its
functionality into the opt tool. THis eliminates one of the largest tools
from LLVM and doesn't make opt much bigger because it already included
most of the analysis passes. To get the old analyze functionality pass
the -analyze option to opt. Note that the integeration here is dead
simple. The "main" of analyze was just copied to opt and invoked if the
-analyze option was given. There may be opportunities for further
integration such as removing the distinction between transform passes
and analysis passes.
To use the analysis functionality, if you previously did this:
analyze $FNAME -domset -disable-verify
you would now do this:
opt -analyze $FNAME -domset -disable-verify
Pretty simple.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29762 91177308-0d34-0410-b5e6-96231b3b80d8
with srcdir = objdir to see what's okay and what's cruft. So, in goes a
bunch of .cvsignore files to shut cvs up about known output from running
"make check".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27009 91177308-0d34-0410-b5e6-96231b3b80d8
number of simple cases. Someday when I get a chance to work on it again, this
testcase should be corrected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9695 91177308-0d34-0410-b5e6-96231b3b80d8
