1. Ensure pVal is set to 0 in each constructor.
2. Fix roundToDouble to make correct calculations and not read beyond the
end of allocated memory.
3. Implement Knuth's "classical algorithm" for division from scratch and
eliminate buffer overflows and uninitialized mememory reads. Document
it properly too.
4. Implement a wrapper function for KnuthDiv which handles the 64-bit to
32-bit conversion and back. It also implement short division for the
n == 1 case that Knuth's algorithm can't handle.
5. Simplify the logic of udiv and urem a little, make them exit early, and
have them use the "divide" wrapper function to perform the division
or remainder operation.
6. Move the toString function to the end of the file, closer to where
the division functions are located.
Note: division is still broken for some > 64 bit values, but at least it
doesn't crash any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34449 91177308-0d34-0410-b5e6-96231b3b80d8
2. Implement toString for power-of-2 radix without using divide and always
printing full words. This allows hex/binary to look at the bit
respresentation of the APInt as well as avoid bugs in divide.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34396 91177308-0d34-0410-b5e6-96231b3b80d8
2. Consolidate memory allocation into just two inline functions.
3. Convert "unsigned" to uint32_t to gaurantee its size.
4. Eliminate magic constants and replace with symbolic equivalent.
5. Improve code documentation slightly.
6. Simplify the logical operator code because bitwidths must be the same.
7. Fix indentation per coding standards.
8. Use exit-early style to reduce indentation in several functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34389 91177308-0d34-0410-b5e6-96231b3b80d8
1. Function style changes.
2. 80-col violations.
3. Better names for things.
4. Arrange constructors so they all take bit width first.
5. Add named signed and unsigned comparison functions and remove the
corresponding operators.
6. Remove operator&& and operator|| but provide a getBoolValue function which
converts to bool as comparison against 0. This allows the normal && and
|| operators to be used as if (X.getBoolValue() && Y.getBoolValue())
Note: this still doesn't function 100% yet. I'm working on the bugs now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34353 91177308-0d34-0410-b5e6-96231b3b80d8
1. Make getMinValue() returns the right value.
2. Fix the ByteSwap() crash problem.
3. Make Postfix increment work correctly.
4. Fix some bugs in LogBase2, Hi/LoBits and UDiv.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34304 91177308-0d34-0410-b5e6-96231b3b80d8
1. Make all the operators use uppercase
2. Rename APIntRoundToDouble method just RoundToDouble, the APInt is
redundant.
3. Turn the class on for compilation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34253 91177308-0d34-0410-b5e6-96231b3b80d8
add some signed/unsigned arithmetic operation functions into APInt.h to
handle the signed/unsigned issue. These functions will be defined inside a
namespace "APIntOps" which is inside llvm namespace.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34053 91177308-0d34-0410-b5e6-96231b3b80d8
It is a functional replacement for common case integer type like "unsigned",
"uint64_t", but also allows non-byte-width integer type and large integer
value types such as 3-bits, 15-bits, or more than 64-bits of precision. For
more details, see pr1043.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33951 91177308-0d34-0410-b5e6-96231b3b80d8
This is the final patch for this PR. It implements some minor cleanup
in the use of IntegerType, to wit:
1. Type::getIntegerTypeMask -> IntegerType::getBitMask
2. Type::Int*Ty changed to IntegerType* from Type*
3. ConstantInt::getType() returns IntegerType* now, not Type*
This also fixes PR1120.
Patch by Sheng Zhou.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33370 91177308-0d34-0410-b5e6-96231b3b80d8
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33225 91177308-0d34-0410-b5e6-96231b3b80d8
recommended that getBoolValue be replaced with getZExtValue and that
get(bool) be replaced by get(const Type*, uint64_t). This implements
those changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33110 91177308-0d34-0410-b5e6-96231b3b80d8
Merge ConstantIntegral and ConstantBool into ConstantInt.
Remove ConstantIntegral and ConstantBool from LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33073 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32751 91177308-0d34-0410-b5e6-96231b3b80d8
(STATISTIC), which allows us to define statistics that don't introduce
static ctors into the .o files. I'm migrating code over to use this
incrementally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32687 91177308-0d34-0410-b5e6-96231b3b80d8
rework the hacks that had us passing OStream in. We pass in std::ostream*
instead, check for null, and then dispatch to the correct print() method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32636 91177308-0d34-0410-b5e6-96231b3b80d8
Rename getZeroExtend and getSignExtend to getZExt and getSExt to match
the the casting mnemonics in the rest of LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32514 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, the stat info is printed when llvm_shutdown() is called.
These also don't need static ctors, but getting rid of them is uglier:
still investigating. This reduces the number of static dtors in llvm from
~1400 to ~750.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32372 91177308-0d34-0410-b5e6-96231b3b80d8
stream. It centralizes the use of std::cerr so that static c'tor/d'tors
aren't scattered around all over the place. The way to use it is like this:
DOUT << "This is a status line: " << Var << "\n";
If "-debug" is specified, it will print. Otherwise, it'll not print. If
NDEBUG is defined, the DOUT does nothing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31798 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31063 91177308-0d34-0410-b5e6-96231b3b80d8
to describe the difference being reported. This assists with understanding
differences an llvm-test and should help with bugpoint too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31044 91177308-0d34-0410-b5e6-96231b3b80d8
anchor methods to others. This eliminates the vtable/template method bloat
in .o files that defining a cl::opt used to impose (~4K per .o file for one
cp::opt<unsigned>).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29909 91177308-0d34-0410-b5e6-96231b3b80d8
Final remove of exception handling from this file. lib/System can no longer
throw exceptions so there's no need for try/catch blocks here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29848 91177308-0d34-0410-b5e6-96231b3b80d8
portion fo the program name via sys::Path().getLast(). This makes error
messages more readable since this is invariably used only in error
messages. Instead of:
/path/to/llvm/bin/directory/toolname: error message
we will now get:
toolname: error message
Also, since we always have a program name (even if its defaulted), don't
check to see if it is set or not when generating error messages. This
eliminates a bunch of constant strings, saving a little under 1K of data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29842 91177308-0d34-0410-b5e6-96231b3b80d8
Adjust users of MappedFile to its new non-throwing interface. Note that in
most cases the lazy step of just throwing after a call to MappedFile was
installed. This was done in the name of incremental changes. Getting rid of
the new throw statements will take adjustment of interfaces and propagation
of errors to higher levels. Those changes will come in subsequent patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29817 91177308-0d34-0410-b5e6-96231b3b80d8
Adjust usage of the ExecuteAndWait function to use the last argument which
is the ErrMsg string. This is necessitated because this function no longer
throws exceptions on error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29791 91177308-0d34-0410-b5e6-96231b3b80d8
Make sys::Program::ExecuteAndWait not throw exceptions and update any
affected code. It now return -9999 to signal that the program couldn't be
executed. Only one case (in bugpoint) actually examines the result code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29785 91177308-0d34-0410-b5e6-96231b3b80d8
to build a loadable module is now correctly defined and documented so this
workaround isn't needed any longer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29553 91177308-0d34-0410-b5e6-96231b3b80d8
instead of throwing an exception. This reduces the amount of code that is
exposed to exceptions (e.g. FileUtilities), though it is clearly only one step
along the way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29395 91177308-0d34-0410-b5e6-96231b3b80d8
1. Move IncludeFile.h to System library
2. Move IncludeFile.cpp to System library
3. #1 and #2 required to prevent cyclic library dependencies for libSystem
4. Convert all existing uses of Support/IncludeFile.h to System/IncludeFile.h
5. Add IncludeFile support to various lib/System classes.
6. Add new lib/System classes to LinkAllVMCore.h
All this in an attempt to pull in lib/System to what's required for VMCore
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29287 91177308-0d34-0410-b5e6-96231b3b80d8
Low Level Virtual Machine (http://llvm.org/):
llvm version 1.8cvs
DEBUG build with assertions.
instead of like this:
Low Level Virtual Machine (llvm) 1.8cvs (see http://llvm.org/) ASSERTIONS ENABLED
Also, add a place for vendor version info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29020 91177308-0d34-0410-b5e6-96231b3b80d8
Refactor the Graph writing code to use a common implementation which is
now in lib/Support/GraphWriter.cpp. This completes the PR.
Patch by Anton Korobeynikov. Thanks, Anton!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28925 91177308-0d34-0410-b5e6-96231b3b80d8
Break the "IncludeFile" mechanism into its own header file and adjust other
files accordingly. Use this facility for the IntrinsicInst problem which
was the subject of PR800.
More to follow on this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28709 91177308-0d34-0410-b5e6-96231b3b80d8
through to gcc when its being used as a linker. This allows -L and -l
(and any other) options to be added so that non-complete bytecode files
can be processed with bugpoint. The -Xlinker option can be added as many
times as needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28692 91177308-0d34-0410-b5e6-96231b3b80d8
built with CommandLine.h will want the --version option to report that the
tool belongs to LLVM. To override simply pass a void func() to the
cl::SetVersionPrinter() function and that void func() will be called when
it is time to print the version information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28687 91177308-0d34-0410-b5e6-96231b3b80d8
BCWriter, and bzip2 libraries. Adjust the various makefiles to accommodate
these changes. This was done to speed up link times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28610 91177308-0d34-0410-b5e6-96231b3b80d8
/bzlib.c:126: warning: string length `1056' is greater than the length `509' ISO
C89 compilers are required to support
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28602 91177308-0d34-0410-b5e6-96231b3b80d8
Add an additional catch block to ensure that this function can't throw any
exceptions, even one's we're not expecting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28309 91177308-0d34-0410-b5e6-96231b3b80d8
the bzip2 homepage, only ancient (gcc 2.7.x ?) versions of GCC
require this? It certainly isn't needed for the current bzip2
sources.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25013 91177308-0d34-0410-b5e6-96231b3b80d8
Move the system dependent portion to lib/System/*/Alarm.inc. This makes the
SlowOperationInformer platform independent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24938 91177308-0d34-0410-b5e6-96231b3b80d8
This chagne just renames some sys::Path methods to ensure they are not
misused. The Path documentation now divides methods into two dimensions:
Path/Disk and accessor/mutator. Path accessors and mutators only operate
on the Path object itself without making any disk accesses. Disk accessors
and mutators will also access or modify the file system. Because of the
potentially destructive nature of disk mutators, it was decided that all
such methods should end in the work "Disk" to ensure the user recognizes
that the change will occur on the file system. This patch makes that
change. The method name changes are:
makeReadable -> makeReadableOnDisk
makeWriteable -> makeWriteableOnDisk
makeExecutable -> makeExecutableOnDisk
setStatusInfo -> setStatusInfoOnDisk
createDirectory -> createDirectoryOnDisk
createFile -> createFileOnDisk
createTemporaryFile -> createTemporaryFileOnDisk
destroy -> eraseFromDisk
rename -> renamePathOnDisk
These changes pass the Linux Deja Gnu tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22354 91177308-0d34-0410-b5e6-96231b3b80d8
Get rid of the difference between file paths and directory paths. The Path
class now simply stores a path that can refer to either a file or a
directory. This required various changes in the implementation and interface
of the class with the corresponding impact to its users. Doxygen comments were
also updated to reflect these changes. Interface changes are:
appendDirectory -> appendComponent
appendFile -> appendComponent
elideDirectory -> eraseComponent
elideFile -> eraseComponent
elideSuffix -> eraseSuffix
renameFile -> rename
setDirectory -> set
setFile -> set
Changes pass Dejagnu and llvm-test/SingleSource tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22349 91177308-0d34-0410-b5e6-96231b3b80d8
BZ_OK (meaning more data is expected) but there is no more input data. In
this case, the input file is probably truncated. Generate an exception that
indicates this case when its detected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21926 91177308-0d34-0410-b5e6-96231b3b80d8
handling zero length files a little more intelligently. If both files are
zero length then we return 0 (true) indicating a match. If only one of the
files is zero length then we return 1 (false) indicating that the files
differ. If the files don't agree in length then they can't match so we
skip the first loop that looks for a quick match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20200 91177308-0d34-0410-b5e6-96231b3b80d8
cases it represented them as 'unsigned's, which are not enough for 64-bit
hosts. In other cases, it represented them as uint64_t's, which are
inefficient for 32-bit hosts.
This patch unifies all of the sizes to use size_t instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19918 91177308-0d34-0410-b5e6-96231b3b80d8
portability, the --track-space option was inadvertently ignored. This patch
fixes that so that sys::Process::GetMallocUsage() is only invoked if the
--track-spaces option is given. Apparently the mallinfo() call that
GetMallocUsage() uses is *very* slow, especially when processing very large
modules like projects/llvm-test/MultiSource/Applications/kimwitu++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19163 91177308-0d34-0410-b5e6-96231b3b80d8
