We use the enums to query whether an Attributes object has that attribute. The
opaque layer is responsible for knowing where that specific attribute is stored.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165488 91177308-0d34-0410-b5e6-96231b3b80d8
The hasFnAttr method has been replaced by querying the Attributes explicitly. No
intended functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164725 91177308-0d34-0410-b5e6-96231b3b80d8
This disables malloc-specific optimization when -fno-builtin (or -ffreestanding)
is specified. This has been a problem for a long time but became more severe
with the recent memory builtin improvements.
Since the memory builtin functions are used everywhere, this required passing
TLI in many places. This means that functions that now have an optional TLI
argument, like RecursivelyDeleteTriviallyDeadFunctions, won't remove dead
mallocs anymore if the TLI argument is missing. I've updated most passes to do
the right thing.
Fixes PR13694 and probably others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162841 91177308-0d34-0410-b5e6-96231b3b80d8
inline threshold if the global inline threshold is lower (as for -Oz).
Reviewed by Chandler Carruth and Bill Wendling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157323 91177308-0d34-0410-b5e6-96231b3b80d8
As a side note, I really dislike array_pod_sort... Do we really still
care about any STL implementations that get this so wrong? Does libc++?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153834 91177308-0d34-0410-b5e6-96231b3b80d8
interfaces. These methods were used in the old inline cost system where
there was a persistent cache that had to be updated, invalidated, and
cleared. We're now doing more direct computations that don't require
this intricate dance. Even if we resume some level of caching, it would
almost certainly have a simpler and more narrow interface than this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153813 91177308-0d34-0410-b5e6-96231b3b80d8
on a per-callsite walk of the called function's instructions, in
breadth-first order over the potentially reachable set of basic blocks.
This is a major shift in how inline cost analysis works to improve the
accuracy and rationality of inlining decisions. A brief outline of the
algorithm this moves to:
- Build a simplification mapping based on the callsite arguments to the
function arguments.
- Push the entry block onto a worklist of potentially-live basic blocks.
- Pop the first block off of the *front* of the worklist (for
breadth-first ordering) and walk its instructions using a custom
InstVisitor.
- For each instruction's operands, re-map them based on the
simplification mappings available for the given callsite.
- Compute any simplification possible of the instruction after
re-mapping, and store that back int othe simplification mapping.
- Compute any bonuses, costs, or other impacts of the instruction on the
cost metric.
- When the terminator is reached, replace any conditional value in the
terminator with any simplifications from the mapping we have, and add
any successors which are not proven to be dead from these
simplifications to the worklist.
- Pop the next block off of the front of the worklist, and repeat.
- As soon as the cost of inlining exceeds the threshold for the
callsite, stop analyzing the function in order to bound cost.
The primary goal of this algorithm is to perfectly handle dead code
paths. We do not want any code in trivially dead code paths to impact
inlining decisions. The previous metric was *extremely* flawed here, and
would always subtract the average cost of two successors of
a conditional branch when it was proven to become an unconditional
branch at the callsite. There was no handling of wildly different costs
between the two successors, which would cause inlining when the path
actually taken was too large, and no inlining when the path actually
taken was trivially simple. There was also no handling of the code
*path*, only the immediate successors. These problems vanish completely
now. See the added regression tests for the shiny new features -- we
skip recursive function calls, SROA-killing instructions, and high cost
complex CFG structures when dead at the callsite being analyzed.
Switching to this algorithm required refactoring the inline cost
interface to accept the actual threshold rather than simply returning
a single cost. The resulting interface is pretty bad, and I'm planning
to do lots of interface cleanup after this patch.
Several other refactorings fell out of this, but I've tried to minimize
them for this patch. =/ There is still more cleanup that can be done
here. Please point out anything that you see in review.
I've worked really hard to try to mirror at least the spirit of all of
the previous heuristics in the new model. It's not clear that they are
all correct any more, but I wanted to minimize the change in this single
patch, it's already a bit ridiculous. One heuristic that is *not* yet
mirrored is to allow inlining of functions with a dynamic alloca *if*
the caller has a dynamic alloca. I will add this back, but I think the
most reasonable way requires changes to the inliner itself rather than
just the cost metric, and so I've deferred this for a subsequent patch.
The test case is XFAIL-ed until then.
As mentioned in the review mail, this seems to make Clang run about 1%
to 2% faster in -O0, but makes its binary size grow by just under 4%.
I've looked into the 4% growth, and it can be fixed, but requires
changes to other parts of the inliner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153812 91177308-0d34-0410-b5e6-96231b3b80d8
size bloat. Unfortunately, I expect this to disable the majority of the
benefit from r152737. I'm hopeful at least that it will fix PR12345. To
explain this requires... quite a bit of backstory I'm afraid.
TL;DR: The change in r152737 actually did The Wrong Thing for
linkonce-odr functions. This change makes it do the right thing. The
benefits we saw were simple luck, not any actual strategy. Benchmark
numbers after a mini-blog-post so that I've written down my thoughts on
why all of this works and doesn't work...
To understand what's going on here, you have to understand how the
"bottom-up" inliner actually works. There are two fundamental modes to
the inliner:
1) Standard fixed-cost bottom-up inlining. This is the mode we usually
think about. It walks from the bottom of the CFG up to the top,
looking at callsites, taking information about the callsite and the
called function and computing th expected cost of inlining into that
callsite. If the cost is under a fixed threshold, it inlines. It's
a touch more complicated than that due to all the bonuses, weights,
etc. Inlining the last callsite to an internal function gets higher
weighth, etc. But essentially, this is the mode of operation.
2) Deferred bottom-up inlining (a term I just made up). This is the
interesting mode for this patch an r152737. Initially, this works
just like mode #1, but once we have the cost of inlining into the
callsite, we don't just compare it with a fixed threshold. First, we
check something else. Let's give some names to the entities at this
point, or we'll end up hopelessly confused. We're considering
inlining a function 'A' into its callsite within a function 'B'. We
want to check whether 'B' has any callers, and whether it might be
inlined into those callers. If so, we also check whether inlining 'A'
into 'B' would block any of the opportunities for inlining 'B' into
its callers. We take the sum of the costs of inlining 'B' into its
callers where that inlining would be blocked by inlining 'A' into
'B', and if that cost is less than the cost of inlining 'A' into 'B',
then we skip inlining 'A' into 'B'.
Now, in order for #2 to make sense, we have to have some confidence that
we will actually have the opportunity to inline 'B' into its callers
when cheaper, *and* that we'll be able to revisit the decision and
inline 'A' into 'B' if that ever becomes the correct tradeoff. This
often isn't true for external functions -- we can see very few of their
callers, and we won't be able to re-consider inlining 'A' into 'B' if
'B' is external when we finally see more callers of 'B'. There are two
cases where we believe this to be true for C/C++ code: functions local
to a translation unit, and functions with an inline definition in every
translation unit which uses them. These are represented as internal
linkage and linkonce-odr (resp.) in LLVM. I enabled this logic for
linkonce-odr in r152737.
Unfortunately, when I did that, I also introduced a subtle bug. There
was an implicit assumption that the last caller of the function within
the TU was the last caller of the function in the program. We want to
bonus the last caller of the function in the program by a huge amount
for inlining because inlining that callsite has very little cost.
Unfortunately, the last caller in the TU of a linkonce-odr function is
*not* the last caller in the program, and so we don't want to apply this
bonus. If we do, we can apply it to one callsite *per-TU*. Because of
the way deferred inlining works, when it sees this bonus applied to one
callsite in the TU for 'B', it decides that inlining 'B' is of the
*utmost* importance just so we can get that final bonus. It then
proceeds to essentially force deferred inlining regardless of the actual
cost tradeoff.
The result? PR12345: code bloat, code bloat, code bloat. Another result
is getting *damn* lucky on a few benchmarks, and the over-inlining
exposing critically important optimizations. I would very much like
a list of benchmarks that regress after this change goes in, with
bitcode before and after. This will help me greatly understand what
opportunities the current cost analysis is missing.
Initial benchmark numbers look very good. WebKit files that exhibited
the worst of PR12345 went from growing to shrinking compared to Clang
with r152737 reverted.
- Bootstrapped Clang is 3% smaller with this change.
- Bootstrapped Clang -O0 over a single-source-file of lib/Lex is 4%
faster with this change.
Please let me know about any other performance impact you see. Thanks to
Nico for reporting and urging me to actually fix, Richard Smith, Duncan
Sands, Manuel Klimek, and Benjamin Kramer for talking through the issues
today.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153506 91177308-0d34-0410-b5e6-96231b3b80d8
to instead rely on much more generic and powerful instruction
simplification in the function cloner (and thus inliner).
This teaches the pruning function cloner to use instsimplify rather than
just the constant folder to fold values during cloning. This can
simplify a large number of things that constant folding alone cannot
begin to touch. For example, it will realize that 'or' and 'and'
instructions with certain constant operands actually become constants
regardless of what their other operand is. It also can thread back
through the caller to perform simplifications that are only possible by
looking up a few levels. In particular, GEPs and pointer testing tend to
fold much more heavily with this change.
This should (in some cases) have a positive impact on compile times with
optimizations on because the inliner itself will simply avoid cloning
a great deal of code. It already attempted to prune proven-dead code,
but now it will be use the stronger simplifications to prove more code
dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153403 91177308-0d34-0410-b5e6-96231b3b80d8
directly query the function information which this set was representing.
This simplifies the interface of the inline cost analysis, and makes the
always-inline pass significantly more efficient.
Previously, always-inline would first make a single set of every
function in the module *except* those marked with the always-inline
attribute. It would then query this set at every call site to see if the
function was a member of the set, and if so, refuse to inline it. This
is quite wasteful. Instead, simply check the function attribute directly
when looking at the callsite.
The normal inliner also had similar redundancy. It added every function
in the module with the noinline attribute to its set to ignore, even
though inside the cost analysis function we *already tested* the
noinline attribute and produced the same result.
The only tricky part of removing this is that we have to be able to
correctly remove only the functions inlined by the always-inline pass
when finalizing, which requires a bit of a hack. Still, much less of
a hack than the set of all non-always-inline functions was. While I was
touching this function, I switched a heavy-weight set to a vector with
sort+unique. The algorithm already had a two-phase insert and removal
pattern, we were just needlessly paying the uniquing cost on every
insert.
This probably speeds up some compiles by a small amount (-O0 compiles
with lots of always-inline, so potentially heavy libc++ users), but I've
not tried to measure it.
I believe there is no functional change here, but yell if you spot one.
None are intended.
Finally, the direction this is going in is to greatly simplify the
inline cost query interface so that we can replace its implementation
with a much more clever one. Along the way, all the APIs get simplified,
so it seems incrementally good.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152903 91177308-0d34-0410-b5e6-96231b3b80d8
which are small enough to themselves be inlined. Delaying in this manner
can be harmful if the function is inelligible for inlining in some (or
many) contexts as it pessimizes the code of the function itself in the
event that inlining does not eventually happen.
Previously the check was written to only do this delaying of inlining
for static functions in the hope that they could be entirely deleted and
in the knowledge that all callers of static functions will have the
opportunity to inline if it is in fact profitable. However, with C++ we
get two other important sources of functions where the definition is
always available for inlining: inline functions and templated functions.
This patch generalizes the inliner to allow linkonce-ODR (the linkage
such C++ routines receive) to also qualify for this delay-based
inlining.
Benchmarking across a range of large real-world applications shows
roughly 2% size increase across the board, but an average speedup of
about 0.5%. Some benhcmarks improved over 2%, and the 'clang' binary
itself (when bootstrapped with this feature) shows a 1% -O0 performance
improvement when run over all Sema, Lex, and Parse source code smashed
into a single file. A clean re-build of Clang+LLVM with a bootstrapped
Clang shows approximately 2% improvement, but that measurement is often
noisy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152737 91177308-0d34-0410-b5e6-96231b3b80d8
candidate set for subsequent inlining, try to simplify the arguments to
the inner call site now that inlining has been performed.
The goal here is to propagate and fold constants through deeply nested
call chains. Without doing this, we loose the inliner bonus that should
be applied because the arguments don't match the exact pattern the cost
estimator uses.
Reviewed on IRC by Benjamin Kramer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152556 91177308-0d34-0410-b5e6-96231b3b80d8
are optimization hints, but at -O0 we're not optimizing. This becomes a problem
when the alwaysinline attribute is abused.
rdar://10921594
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151429 91177308-0d34-0410-b5e6-96231b3b80d8
case where a static caller is itself inlined everywhere else, and
thus may go away if it doesn't get too big due to inlining other
things into it. If there are references to the caller other than
calls, it will not be removed; account for this.
This results in same-day completion of the case in PR8853.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122821 91177308-0d34-0410-b5e6-96231b3b80d8
optimization.
Consider:
static void foo() {
A = alloca
...
}
static void bar() {
B = alloca
...
call foo();
}
void main() {
bar()
}
The inliner proceeds bottom up, but lets pretend it decides not to inline foo
into bar. When it gets to main, it inlines bar into main(), and says "hey, I
just inlined an alloca "B" into main, lets remember that. Then it keeps going
and finds that it now contains a call to foo. It decides to inline foo into
main, and says "hey, foo has an alloca A, and I have an alloca B from another
inlined call site, lets reuse it". The problem with this of course, is that
the lifetime of A and B are nested, not disjoint.
Unfortunately I can't create a reasonable testcase for this: the one in the
PR is both huge and extremely sensitive, because you minor tweaks end up
causing foo to get inlined into bar too early. We already have tests for the
basic alloca merging optimization and this does not break them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120995 91177308-0d34-0410-b5e6-96231b3b80d8
threshold given to createFunctionInliningPass().
Both opt -O3 and clang would silently ignore the -inline-threshold option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118117 91177308-0d34-0410-b5e6-96231b3b80d8
halting analysis, it is illegal to delete a call to a read-only function.
The correct solution is almost certainly to add a "must halt" attribute and
only allow deletions in its presence.
XFAIL the relevant testcase for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102831 91177308-0d34-0410-b5e6-96231b3b80d8
that appear due to inlining a callee as candidates for
futher inlining, but a recent patch made it do this if
those call sites were indirect and became direct.
Unfortunately, in bizarre cases (see testcase) doing this
can cause us to infinitely inline mutually recursive
functions into callers not in the cycle. Fix this by
keeping track of the inline history from which callsite
inline candidates got inlined from.
This shouldn't affect any "real world" code, but is required
for a follow on patch that is coming up next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102822 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug where calls inlined into an invoke would get
changed into an invoke but the array would keep pointing to
the (now dead) call. The improved inliner behavior is still
disabled for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102196 91177308-0d34-0410-b5e6-96231b3b80d8
that appear in the SCC as a result of inlining as candidates
for inlining. Change this so that it *does* consider call
sites that change from being indirect to being direct as a
result of inlining. This allows it to completely
"devirtualize" the testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102146 91177308-0d34-0410-b5e6-96231b3b80d8
arguments are handled with a new InlineFunctionInfo class. This
makes it easier to extend InlineFunction to return more info in the
future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102137 91177308-0d34-0410-b5e6-96231b3b80d8
to CallGraphSCCPass's instead of passing around a
std::vector<CallGraphNode*>. No functionality change,
but now we have a much tidier interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101558 91177308-0d34-0410-b5e6-96231b3b80d8
The Caller cost info would be reset everytime a callee was inlined. If the
caller has lots of calls and there is some mutual recursion going on, the
caller cost info could be calculated many times.
This patch reduces inliner runtime from 240s to 0.5s for a function with 20000
small function calls.
This is a more conservative version of r98089 that doesn't break the clang
test CodeGenCXX/temp-order.cpp. That test relies on rather extreme inlining
for constant folding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98099 91177308-0d34-0410-b5e6-96231b3b80d8
The Caller cost info would be reset everytime a callee was inlined. If the
caller has lots of calls and there is some mutual recursion going on, the
caller cost info could be calculated many times.
This patch reduces inliner runtime from 240s to 0.5s for a function with 20000
small function calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98089 91177308-0d34-0410-b5e6-96231b3b80d8
Functions explicitly marked inline will get an inlining threshold slightly
more aggressive than the default for -O3. This means than -O3 builds are
mostly unaffected while -Os builds will be a bit bigger and faster.
The difference depends entirely on how many 'inline's are sprinkled on the
source.
In the CINT2006 suite, only these tests are significantly affected under -Os:
Size Time
471.omnetpp +1.63% -1.85%
473.astar +4.01% -6.02%
483.xalancbmk +4.60% 0.00%
Note that 483.xalancbmk runs too quickly to give useful timing results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96066 91177308-0d34-0410-b5e6-96231b3b80d8
This time it's for real! I am going to hook this up in the frontends as well.
The inliner has some experimental heuristics for dealing with the inline hint.
When given a -respect-inlinehint option, functions marked with the inline
keyword are given a threshold just above the default for -O3.
We need some experiments to determine if that is the right thing to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95466 91177308-0d34-0410-b5e6-96231b3b80d8
This makes the inliner about as agressive as it was before my changes to the
inliner cost calculations. These levels give the same performance and slightly
smaller code than before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95320 91177308-0d34-0410-b5e6-96231b3b80d8
