A include/llvm/ADT/iterator.cmake
U autoconf/configure.ac
--- Reverse-merging r80161 into '.':
U cmake/config-ix.cmake
--- Reverse-merging r80171 into '.':
U Makefile
--- Reverse-merging r80173 into '.':
U configure
U include/llvm/Config/config.h.in
--- Reverse-merging r80180 into '.':
A include/llvm/ADT/iterator.h.in
Despite common miscomceptions, iterator.h is alive and well. It broke the build
bots for several hours. And yet no one bothered to look at them.
Gabor and Doug, please review your changes and make sure that they actually
build before resubmitting them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80197 91177308-0d34-0410-b5e6-96231b3b80d8
so get rid of this monstrosity. iterator.h.in is scheduled for deletion in my working copy,
but I wait till I see that configure gets regenerated, as it depends on it. I'll commit
then.
There are still some AC_* tests in the configure.ac dealing with iterators, those can
be zapped probably too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80147 91177308-0d34-0410-b5e6-96231b3b80d8
- I did not actually remove the configure test itself, someone who can
regenerate configure should do this (see FIXME in autoconf/configure.ac)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79881 91177308-0d34-0410-b5e6-96231b3b80d8
try to use i686-darwin to build for arm-eabi, you'll quickly run into
several false assumptions that the target OS must be the same as the
host OS. These patches split $(OS) into $(HOST_OS) and $(TARGET_OS) to
help builds like "make check" and the test-suite able to cross
compile. Along the way a target of *-unknown-eabi is defined as
"Freestanding" so that TARGET_OS checks have something to work with.
Patch by Sandeep Patel!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79296 91177308-0d34-0410-b5e6-96231b3b80d8
by defining a LLVM_COMPACT_SENTINELS symbol to 0 or 1 in config.h.
I'm asking for 3 favors:
- may an autofoo expert look at this and suggest improvements?
- may a cmake expert suggest analogous functionality for config.h?
- may somebody with the right autofoo mix regenerate configure? (mine is too new)
Thanks!
--This line, and those below, will be ignored--
M configure.ac
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78628 91177308-0d34-0410-b5e6-96231b3b80d8
Note that configure was edited by hand. Will somebody with the correct version of autoconf please regenerate?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77898 91177308-0d34-0410-b5e6-96231b3b80d8
library to tell it the addresses of JITted functions. For a
particular program, this changes the opreport -l output from:
samples % image name symbol name
48182 98.9729 anon (tgid:19412 range:0x7f12ccaab000-0x7f12cdaab000) anon (tgid:19412 range:0x7f12ccaab000-0x7f12cdaab000)
11 0.0226 libstdc++.so.6.0.9 /usr/lib/libstdc++.so.6.0.9
to:
samples % image name symbol name
24565 60.7308 19814.jo fib_left
15365 37.9861 19814.jo fib_right
22 0.0544 ld-2.7.so do_lookup_x
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75279 91177308-0d34-0410-b5e6-96231b3b80d8
with very large graphs, where dot isn't necessarily the
most visually pleasing way of looking at the graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75144 91177308-0d34-0410-b5e6-96231b3b80d8
Controls whether libCompilerDriver should be loaded dynamically. By default this
is needed only on Win32, to make dynamic plugins work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74759 91177308-0d34-0410-b5e6-96231b3b80d8
Windows variant, strerror_s, but I couldn't test that.
I'll update configure and config.h.in in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74621 91177308-0d34-0410-b5e6-96231b3b80d8
initialization of all targets (InitializeAllTargets.h) or assembler
printers (InitializeAllAsmPrinters.h). This is a step toward the
elimination of relinked object files, so that we can build normal
archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73543 91177308-0d34-0410-b5e6-96231b3b80d8
Also, there were a bunch of flags with no text in --help because the square
brackets were in the wrong place. I've fixed those too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72989 91177308-0d34-0410-b5e6-96231b3b80d8
mutex support. LLVM_MULTITHREADED indicates (or will indicate) the ability to run LLVM itself across multiple threads, and requires atomics support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72140 91177308-0d34-0410-b5e6-96231b3b80d8
disable building LLVM in thread-safe mode and print a nice warning.
Regenerate configure for these changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72075 91177308-0d34-0410-b5e6-96231b3b80d8
Should now work when building with objdir != srcdir and when llvm-gcc is not
available.
Thanks to Duncan Sands for testing and advice!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69700 91177308-0d34-0410-b5e6-96231b3b80d8
Configure was not actually regenerated, but the change last time only touched
this one line, so I'm being lazy and cheating by fixing it manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69453 91177308-0d34-0410-b5e6-96231b3b80d8
there.
This changes the interpreter to use libffi. After this patch, the interpreter
will barely be able to call any external functions if built on a system without
libffi installed (just enough to pass 'make check' really). But with libffi,
we can now call any function that isn't variadic or taking a struct or vector
parameter (but pointer to struct is fine). Patch by Alexei Svitkine!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@63723 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a rebuild of 'configure' itself. I will be committing that next, but
built with the wrong version of autoconf. Somebody who has the right one, please update
it.
As a side-note, because of the way autoconf works, all built tools will link against
libffi, not just lli. If you know how to fix this, please let me know ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62553 91177308-0d34-0410-b5e6-96231b3b80d8
runnable on the build machine.
There are a few bits that need built for the build environment (TableGen).
This patch builds those bits, and the associated libraries, for the build
environment as well as the (usual) host environment.
Thanks to Eric C. and Devang P. for pre-commit review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56975 91177308-0d34-0410-b5e6-96231b3b80d8
We will keep the old projects/llvm-test working for existing installs.
The changes to configure are made manually, since I lack autoconf-2.6. Someone
might want to run AutoGen.sh to see if that changes anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52675 91177308-0d34-0410-b5e6-96231b3b80d8
put it in a new header System/Host.h instead.
Instead of getting the endianness from configure,
calculate it directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44959 91177308-0d34-0410-b5e6-96231b3b80d8
using the minimum possible number of bytes. For little
endian targets run on little endian machines, apints are
stored in memory from LSB to MSB as before. For big endian
targets on big endian machines they are stored from MSB to
LSB which wasn't always the case before (if the target and
host endianness doesn't match values are stored according
to the host's endianness). Doing this requires knowing the
endianness of the host, which is determined when configuring -
thanks go to Anton for this. Only having access to little
endian machines I was unable to properly test the big endian
part, which is also the most complicated...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44796 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix typo in SPUCallingConv.td
- Credit myself for CellSPU work
- Add CellSPU to 'all' host target list
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44627 91177308-0d34-0410-b5e6-96231b3b80d8
stdlib if it's beneath --prefix, and is libdir/ocaml otherwise.
If someone has a better way than this to test whether $B is a path
within $A, I'd love to hear it:
if test "$A" \< "$B" -a "$B" \< "${A}~"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42532 91177308-0d34-0410-b5e6-96231b3b80d8
The AC_CHECK_HEADER macro was used instead of AC_CHECK_HEADERS. The former does
not automatically add a #define to the configure variables while the latter
does. Consequently, the HAVE_PTHREAD_H symbol was not defined which caused the
Mutex.cpp file to compile to an empty implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41137 91177308-0d34-0410-b5e6-96231b3b80d8
JITer (short path is added for darwin). This is needed to properly JIT llvm-gcc-4.2-built
binaries, since cxa_atexit is enabled by default on much more targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40600 91177308-0d34-0410-b5e6-96231b3b80d8
* autoconf/AutoRegen.sh: use variables for autofoo versions
* autoconf/configure.ac: test for some more functions
that are not guaranteed on solaris
Note: the svn:mime-type of autoconf/AutoRegen.sh
should be set to something that allows for
text compares using svn diff
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39800 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-expensive-checks allows the developer to enable runtime
checking that can greatly increase compile time. Currently it only
turns on _GLIBCXX_DEBUG. Other expensive debugging checks added later
should be controlled by this configure option.
This patch also updates llvm-config with a --cppflags option to inform
llvm-gcc how to build itself so that it is compatible with an llvm that
was built with _GLIBCXX_DEBUG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37777 91177308-0d34-0410-b5e6-96231b3b80d8
plain wrong since $module was never defined so we always get .so which is
broken on Darwin. Just force it to .dylib.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35873 91177308-0d34-0410-b5e6-96231b3b80d8
Change the llvm-gcc sanity check to look for "target datalayout" instead
of "implementation". The implementation keyword is no longer generated
by llvm or llvm-gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35451 91177308-0d34-0410-b5e6-96231b3b80d8
Add HAVE_PTHREAD to makefiles with support from configure and use it to
determine whether to build examples/ParallelJIT.
Patch by Anton Korobeynikov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32054 91177308-0d34-0410-b5e6-96231b3b80d8
premature, these libraries will be going away for the 2.0 release. Other
arrangements for profiling, gc, etc. should be made in the next few months.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31807 91177308-0d34-0410-b5e6-96231b3b80d8
stands a chance of being compiled with a non C99 C compiler. The default
is enabled so you must specifically disable this feature if you want the
CBE output compiled with an older C compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31461 91177308-0d34-0410-b5e6-96231b3b80d8
Demote check for bison from error to warning and make sure that the
makefile can handle an empty definition for BISON variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29861 91177308-0d34-0410-b5e6-96231b3b80d8
Fix problem setting the USE_{program} variable. It should be set to a
Makefile variable definition line, not just "1". Problem noted by
Kenneth Hoste.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29682 91177308-0d34-0410-b5e6-96231b3b80d8
Fix problem noticed by Kenneth Hoste. The wrong name for a variable was
being set and subsequently uses of the correct name were empty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29681 91177308-0d34-0410-b5e6-96231b3b80d8
Update ltld.[ch] to version 1.5.22.
Correct the notes about updating these tools (autoconf/README.TXT)
Add configure options for getting the correct option for including a whole
archive when linking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29529 91177308-0d34-0410-b5e6-96231b3b80d8