Commit Graph

391 Commits

Author SHA1 Message Date
Chandler Carruth
0f3e4b1495 Manually update the dependencies in the Makefiles. It turns out that all
that work on the LLVMBuild based dependency specification didn't
actually work, we just now maintain dependencies in *3* places instead
of 2. Yay.

There may still be some missing dependencies, I'm still sifting through
the bots and my builds, but this is a step in the right direction.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177988 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-26 03:45:47 +00:00
Chandler Carruth
7fc162f893 Split out the IRReader header and the utility functions it provides into
its own library. These functions are bridging between the bitcode reader
and the ll parser which are in different libraries. Previously we didn't
have any good library to do this, and instead played fast and loose with
a "header only" set of interfaces in the Support library. This really
doesn't work well as evidenced by the recent attempt to add timing logic
to the these routines.

As part of this, make them normal functions rather than weird inline
functions, and sink the implementation into the library. Also clean up
the header to be nice and minimal.

This requires updating lots of build system dependencies to specify that
the IRReader library is needed, and several source files to not
implicitly rely upon the header file to transitively include all manner
of other headers.

If you are using IRReader.h, this commit will break you (the header
moved) and you'll need to also update your library usage to include
'irreader'. I will commit the corresponding change to Clang momentarily.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177971 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-26 02:25:37 +00:00
Chandler Carruth
aeef83c6af Switch TargetTransformInfo from an immutable analysis pass that requires
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.

The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.

The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.

The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.

The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.

The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.

The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.

The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.

Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.

Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.

Commits to update DragonEgg and Clang will be made presently.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-07 01:37:14 +00:00
Chandler Carruth
7bdf6b00e0 Convert the TargetTransformInfo from an immutable pass with dynamic
interfaces which could be extracted from it, and must be provided on
construction, to a chained analysis group.

The end goal here is that TTI works much like AA -- there is a baseline
"no-op" and target independent pass which is in the group, and each
target can expose a target-specific pass in the group. These passes will
naturally chain allowing each target-specific pass to delegate to the
generic pass as needed.

In particular, this will allow a much simpler interface for passes that
would like to use TTI -- they can have a hard dependency on TTI and it
will just be satisfied by the stub implementation when that is all that
is available.

This patch is a WIP however. In particular, the "stub" pass is actually
the one and only pass, and everything there is implemented by delegating
to the target-provided interfaces. As a consequence the tools still have
to explicitly construct the pass. Switching targets to provide custom
passes and sinking the stub behavior into the NoTTI pass is the next
step.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171621 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-05 11:43:11 +00:00
Chandler Carruth
0b8c9a80f2 Move all of the header files which are involved in modelling the LLVM IR
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.

There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.

The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.

I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).

I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-02 11:36:10 +00:00
Chandler Carruth
7f00f87767 Sort a few more #include lines in tools/... unittests/... and utils/...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171363 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-02 10:26:28 +00:00
NAKAMURA Takumi
f2a68db426 llvm/tools: Add #include "llvm/TargetTransformInfo.h"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169817 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-11 05:53:37 +00:00
Chandler Carruth
f010c464a1 Sort the #include lines for tools/...
Again, tools are trickier to pick the main module header for than
library source files. I've started to follow the pattern of using
LLVMContext.h when it is included as a stub for program source files.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169252 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-04 10:44:52 +00:00
Jakob Stoklund Olesen
882092808b Add a -time-compilations=<N> option to llc.
This causes llc to repeat the module compilation N times, making it
possible to get more accurate information from -time-passes when
compiling small modules.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169040 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-30 21:42:47 +00:00
Pedro Artigas
6eda081345 One more step towards making doInitialization and doFinalization useful for
start up and clean up module passes, now that ASAN and TSAN are fixed the
tests pass



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168905 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 17:47:05 +00:00
Owen Anderson
9780d352b9 Revert r168635 "Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model".
It appears to have broken at least one buildbot.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168654 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 00:53:24 +00:00
Owen Anderson
0d30d30d58 Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model
Patch by Pedro Artigas, with feedback from by Chandler Carruth.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168635 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-26 23:54:47 +00:00
Owen Anderson
40b6fdb81e Add doInitialization and doFinalization methods to ModulePass's, to allow them to be re-initialized and reused on multiple Module's.
Patch by Pedro Artigas.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168008 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-15 00:14:15 +00:00
Nadav Rotem
cbd9a19b5d Reapply the TargerTransformInfo changes, minus the changes to LSR and Lowerinvoke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166248 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-18 23:22:48 +00:00
Bob Wilson
3b9a911efc Temporarily revert the TargetTransform changes.
The TargetTransform changes are breaking LTO bootstraps of clang.  I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.

This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166168 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-18 05:43:52 +00:00
Nadav Rotem
e3d0e86919 Add a new interface to allow IR-level passes to access codegen-specific information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165665 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-10 22:04:55 +00:00
Micah Villmow
791cfc211a Move TargetData to DataLayout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165403 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-08 16:39:34 +00:00
Chad Rosier
35907e9862 Add support for the --param ssp-buffer-size= driver option.
PR9673

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162284 91177308-0d34-0410-b5e6-96231b3b80d8
2012-08-21 16:15:24 +00:00
Bob Wilson
5f91a99427 Add test triples to fix win32 failures. Revert workaround from r161292.
I don't have a win32 system to test, so hopefully I got them all fixed here.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161519 91177308-0d34-0410-b5e6-96231b3b80d8
2012-08-08 20:31:37 +00:00
NAKAMURA Takumi
17d2853a4b llc: Try to suppress failures since r161262 .
FIXME: Fix several tests on i686-win32 due to lacking of many libraries.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161292 91177308-0d34-0410-b5e6-96231b3b80d8
2012-08-04 01:29:37 +00:00
Bob Wilson
772af92cb1 Fix memcmp code-gen to honor -fno-builtin.
I noticed that SelectionDAGBuilder::visitCall was missing a check for memcmp
in TargetLibraryInfo, so that it would use custom code for memcmp calls even
with -fno-builtin.  I also had to add a new -disable-simplify-libcalls option
to llc so that I could write a test for this.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161262 91177308-0d34-0410-b5e6-96231b3b80d8
2012-08-03 21:26:18 +00:00
Chad Rosier
7a43e30a9b Tweak prose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160478 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-19 00:11:45 +00:00
Evan Cheng
769951f6cc Target option DisableJumpTables is a gross hack. Move it to TargetLowering instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159611 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-02 22:39:56 +00:00
Bob Wilson
30a507a1f5 Extend TargetPassConfig to allow running only a subset of the normal passes.
This is still a work in progress but I believe it is currently good enough
to fix PR13122 "Need unit test driver for codegen IR passes".  For example,
you can run llc with -stop-after=loop-reduce to have it dump out the IR after
running LSR.  Serializing machine-level IR is not yet supported but we have
some patches in progress for that.

The plan is to serialize the IR to a YAML file, containing separate sections
for the LLVM IR, machine-level IR, and whatever other info is needed.  Chad
suggested that we stash the stop-after pass in the YAML file and use that
instead of the start-after option to figure out where to restart the
compilation.  I think that's a great idea, but since it's not implemented yet
I put the -start-after option into this patch for testing purposes.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159570 91177308-0d34-0410-b5e6-96231b3b80d8
2012-07-02 19:48:45 +00:00
Duncan Sands
f6ce8ea20c When users ask for -mcpu=help or -mattr=help, just output the help without
requiring a module.  Original patch by Sunay Ismail, simplified by Arnaud
de Grandmaison, then complicated by me (if a triple was specified on the
command line, output help for that triple, not for the default).


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159268 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-27 16:23:48 +00:00
Rafael Espindola
275c85f1a7 Fix llc's -print-before=pass and -print-after=pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159227 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-26 21:33:36 +00:00
Lang Hames
59d454959f Rename fp-op fusion option (yet again) for compatibility with GCC option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159042 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-22 22:31:00 +00:00
Lang Hames
e023141322 Rename -allow-excess-fp-precision flag to -fuse-fp-ops, and switch from a
boolean flag to an enum: { Fast, Standard, Strict } (default = Standard).

This option controls the creation by optimizations of fused FP ops that store
intermediate results in higher precision than IEEE allows (E.g. FMAs). The
behavior of this option is intended to match the behaviour specified by a
soon-to-be-introduced frontend flag: '-ffuse-fp-ops'.

Fast mode - allows formation of fused FP ops whenever they're profitable.

Standard mode - allow fusion only for 'blessed' FP ops. At present the only
blessed op is the fmuladd intrinsic. In the future more blessed ops may be
added.

Strict mode - allow fusion only if/when it can be proven that the excess
precision won't effect the result.

Note: This option only controls formation of fused ops by the optimizers.  Fused
operations that are explicitly requested (e.g. FMA via the llvm.fma.* intrinsic)
will always be honored, regardless of the value of this option.

Internally TargetOptions::AllowExcessFPPrecision has been replaced by
TargetOptions::AllowFPOpFusion.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158956 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-22 01:09:09 +00:00
Lang Hames
d693cafcfb Add DAG-combines for aggressive FMA formation.
This patch adds DAG combines to form FMAs from pairs of FADD + FMUL or
FSUB + FMUL. The combines are performed when:
(a) Either
      AllowExcessFPPrecision option (-enable-excess-fp-precision for llc)
        OR
      UnsafeFPMath option (-enable-unsafe-fp-math)
    are set, and
(b) TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) is true for the type of
    the FADD/FSUB, and
(c) The FMUL only has one user (the FADD/FSUB).

If your target has fast FMA instructions you can make use of these combines by
overriding TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) to return true for
types supported by your FMA instruction, and adding patterns to match ISD::FMA
to your FMA instructions.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158757 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-19 22:51:23 +00:00
Rafael Espindola
d6b43a317e Move the support for using .init_array from ARM to the generic
TargetLoweringObjectFileELF. Use this to support it on X86. Unlike ARM,
on X86 it is not easy to find out if .init_array should be used or not, so
the decision is made via TargetOptions and defaults to off.

Add a command line option to llc that enables it.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158692 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-19 00:48:28 +00:00
Benjamin Kramer
773ef61299 Object file output from llc isn't experimental anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158305 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-11 09:40:10 +00:00
Bob Wilson
6e1b812850 Add an insertPass API to TargetPassConfig. <rdar://problem/11498613>
Besides adding the new insertPass function, this patch uses it to
enhance the existing -print-machineinstrs so that the MachineInstrs
after a specific pass can be printed.

Patch by Bin Zeng!

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157655 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-30 00:17:12 +00:00
Kevin Enderby
9ed9e5d0f9 Fix it so llvm-objdump -arch does accept x86 and x86-64 as valid arch names.
PR12731.  Patch by Meador Inge!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156444 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-08 23:38:45 +00:00
Nick Lewycky
9a1484165c Move the JIT flags from llc to lli. These flags showed up as part of moving
backend flags in TargetOptions.h into their own class in r145714.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154993 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-18 08:34:12 +00:00
Chandler Carruth
253933ee9e Teach LLVM about a PIE option which, when enabled on top of PIC, makes
optimizations which are valid for position independent code being linked
into a single executable, but not for such code being linked into
a shared library.

I discussed the design of this with Eric Christopher, and the decision
was to support an optional bit rather than a completely separate
relocation model. Fundamentally, this is still PIC relocation, its just
that certain optimizations are only valid under a PIC relocation model
when the resulting code won't be in a shared library. The simplest path
to here is to expose a single bit option in the TargetOptions. If folks
have different/better designs, I'm all ears. =]

I've included the first optimization based upon this: changing TLS
models to the *Exec models when PIE is enabled. This is the LLVM
component of PR12380 and is all of the hard work.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-08 17:51:45 +00:00
Andrew Trick
8dd26253f5 RegAlloc superpass: includes phi elimination, coalescing, and scheduling.
Creates a configurable regalloc pipeline.

Ensure specific llc options do what they say and nothing more: -reglloc=... has no effect other than selecting the allocator pass itself. This patch introduces a new umbrella flag, "-optimize-regalloc", to enable/disable the optimizing regalloc "superpass". This allows for example testing coalscing and scheduling under -O0 or vice-versa.

When a CodeGen pass requires the MachineFunction to have a particular property, we need to explicitly define that property so it can be directly queried rather than naming a specific Pass. For example, to check for SSA, use MRI->isSSA, not addRequired<PHIElimination>.

CodeGen transformation passes are never "required" as an analysis

ProcessImplicitDefs does not require LiveVariables.

We have a plan to massively simplify some of the early passes within the regalloc superpass.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150226 91177308-0d34-0410-b5e6-96231b3b80d8
2012-02-10 04:10:36 +00:00
Nick Lewycky
22de16dc75 Add a TargetOption for disabling tail calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148442 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-19 00:34:10 +00:00
David Blaikie
2bd335470f Remove unnecessary default cases in switches that cover all enum values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147855 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-10 16:47:17 +00:00
Dylan Noblesmith
9421406aad drop unneeded config.h includes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147197 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-22 23:04:07 +00:00
Daniel Dunbar
4ab406d7fc LLVMBuild: Remove trailing newline, which irked me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146409 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-12 19:48:00 +00:00
Nick Lewycky
8a8d479214 Move global variables in TargetMachine into new TargetOptions class. As an API
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.

One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-02 22:16:29 +00:00
Evan Cheng
b95fc31aa2 Sink codegen optimization level into MCCodeGenInfo along side relocation model
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144788 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-16 08:38:26 +00:00
Daniel Dunbar
0d3c223035 LLVMBuild: Add description files for the LLVM tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144417 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-11 22:59:39 +00:00
Sebastian Pop
0173864d8a rename getHostTriple into getDefaultTargetTriple
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143502 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-01 21:32:20 +00:00
Nick Lewycky
4e478fed1b Switch new .file directive emission off by default, change llc's flag for it to
-enable-dwarf-directory.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143326 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-31 01:06:02 +00:00
Daniel Dunbar
8c39c9647d build: Tidy up a bunch of tool Makefiles, and simplify where possible using the
new all-targets pseudo-component.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142401 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-18 19:27:24 +00:00
Nick Lewycky
44d798d976 Add support for a new extension to the .file directive:
.file filenumber "directory" "filename"

This removes one join+split of the directory+filename in MC internals. Because
bitcode files have independent fields for directory and filenames in debug info,
this patch may change the .o files written by existing .bc files.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142300 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-17 23:05:28 +00:00
Chris Lattner
d8b7aa2613 Enhance llvm::SourceMgr to support diagnostic ranges, the same way clang does. Enhance
the X86 asmparser to produce ranges in the one case that was annoying me, for example:

test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
              ^~~~~~~

It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use 
ranges where appropriate if someone is interested.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142106 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-16 04:47:35 +00:00
Evan Cheng
3e74d6fdd2 Move TargetRegistry and TargetSelect from Target to Support where they belong.
These are strictly utilities for registering targets and components.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138450 91177308-0d34-0410-b5e6-96231b3b80d8
2011-08-24 18:08:43 +00:00
Evan Cheng
e78085a3c0 Combine all MC initialization routines into one. e.g. InitializeX86MCAsmInfo,
InitializeX86MCInstrInfo, etc. are combined into InitializeX86TargetMC.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135812 91177308-0d34-0410-b5e6-96231b3b80d8
2011-07-22 21:58:54 +00:00