Make sure we do not emit index computations with NSW flags so that we dont get an undef value if the GEP overflows
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160589 91177308-0d34-0410-b5e6-96231b3b80d8
(instead of basenames) from DWARF. Use this behavior in llvm-dwarfdump tool.
Reviewed by Benjamin Kramer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160496 91177308-0d34-0410-b5e6-96231b3b80d8
For a measure of safety, this conversion is only permitted if the
stored pointer type can also be created from a const void *.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160456 91177308-0d34-0410-b5e6-96231b3b80d8
- section types
- dynamic table entries tags
- state flags for DT_FLAGS_1 entry
The patch reviewed by Rafael Espindola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160433 91177308-0d34-0410-b5e6-96231b3b80d8
These functions have obviously never been used before.
They should be identical to the idf_ext_iterator counterparts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160381 91177308-0d34-0410-b5e6-96231b3b80d8
Make it possible to prune individual graph edges from a post-order
traversal by specializing the po_iterator_storage template. Previously,
it was only possible to prune full graph nodes. Edge pruning makes it
possible to remove loop back-edges, for example.
Also replace the existing DFSetTraits customization hook with a
po_iterator_storage method for observing the post-order. DFSetTraits was
only used by LoopIterator.h which now provides a po_iterator_storage
specialization.
Thanks to Sean and Chandler for reviewing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160366 91177308-0d34-0410-b5e6-96231b3b80d8
Define a 'null_frag' SDPatternOperator node, which if referenced in an
instruction Pattern, results in the pattern being collapsed to be as-if
'[]' had been specified instead. This allows supporting a multiclass
definition where some instaniations have ISel patterns associated and
others do not.
For example,
multiclass myMulti<RegisterClass rc, SDPatternOperator OpNode = null_frag> {
def _x : myI<(outs rc:), (ins rc:), []>;
def _r : myI<(outs rc:), (ins rc:), [(set rc:, (OpNode rc:))]>;
}
defm foo : myMulti<GRa, not>;
defm bar : myMulti<GRb>;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160333 91177308-0d34-0410-b5e6-96231b3b80d8
The first variant accepts immediate number as the second argument.
The second variant accepts register operand as the second argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160307 91177308-0d34-0410-b5e6-96231b3b80d8
Added a basic unit test for this with CreateCondBr. I didn't go all the
way and test the switch side as the boilerplate for setting up the
switch IRBuilder unit tests is a lot more. Fortunately, the two share
all the interesting code paths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160251 91177308-0d34-0410-b5e6-96231b3b80d8
the move of *Builder classes into the Core library.
No uses of this builder in Clang or DragonEgg I could find.
If there is a desire to have an IR-building-support library that
contains all of these builders, that can be easily added, but currently
it seems likely that these add no real overhead to VMCore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160243 91177308-0d34-0410-b5e6-96231b3b80d8
IRBuilder, DIBuilder, etc.
This is the proper layering as MDBuilder can't be used (or implemented)
without the Core Metadata representation.
Patches to Clang and Dragonegg coming up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160237 91177308-0d34-0410-b5e6-96231b3b80d8
Add a micro-optimization to getNode of CONCAT_VECTORS when both operands are undefs.
Can't find a testcase for this because VECTOR_SHUFFLE already handles undef operands, but Duncan suggested that we add this.
Together with Michael Kuperstein <michael.m.kuperstein@intel.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160229 91177308-0d34-0410-b5e6-96231b3b80d8
All SCEV expressions used by LSR formulae must be safe to
expand. i.e. they may not contain UDiv unless we can prove nonzero
denominator.
Fixes PR11356: LSR hoists UDiv.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160205 91177308-0d34-0410-b5e6-96231b3b80d8
generalizing its implementation sufficiently to support this value
number scenario as well.
This cuts out another significant performance hit in large functions
(over 10k basic blocks, etc), especially those with "natural" CFG
structures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160026 91177308-0d34-0410-b5e6-96231b3b80d8
X86MachineFunctionInfo as this is currently only used by X86. If this ever
becomes an issue on another arch (e.g., ARM) then we can hoist it back out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160009 91177308-0d34-0410-b5e6-96231b3b80d8
X86. Basically, this is a reapplication of r158087 with a few fixes.
Specifically, (1) the stack pointer is restored from the base pointer before
popping callee-saved registers and (2) in obscure cases (see comments in patch)
we must cache the value of the original stack adjustment in the prologue and
apply it in the epilogue.
rdar://11496434
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160002 91177308-0d34-0410-b5e6-96231b3b80d8
quadratic behavior when performing pathological merges. Fixes the core
element of PR12652.
There is only one user of addRangeFrom left: join. I'm hoping to
refactor further in a future patch and have join use this merge
operation as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159982 91177308-0d34-0410-b5e6-96231b3b80d8
of the trick merge routines. This adds a layer of testing that was
necessary when implementing more efficient (and complex) merge logic for
this datastructure.
No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159981 91177308-0d34-0410-b5e6-96231b3b80d8
TableGen has support for using an intrinics name directly in a DAG,
but this breaks down when referring to just a node, as that's
handled initializer list stuff entirely via subclassing in the
parser. That is, using an instrinsic like "(int_my_intrinsic ...)"
works fine. Using it standalone for parameterizing the operator
in such a DAG does not.
Fixing this is simple enough, as we simply declare Intrinsic
as deriving from SDPatternOperator, which is the class name
intended for exactly this purpose in TargetSelectionDAG.td.
When the intrinsic is actually used in the DAG pattern, it will
be recognized and expanded to an intrinsic_wo_chain (et. al.)
just like when it's used directly.
Incoming ARM NEON cleanup based on this and a bit of functionality
improvement after that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159973 91177308-0d34-0410-b5e6-96231b3b80d8
subtarget CPU descriptions and support new features of
MachineScheduler.
MachineModel has three categories of data:
1) Basic properties for coarse grained instruction cost model.
2) Scheduler Read/Write resources for simple per-opcode and operand cost model (TBD).
3) Instruction itineraties for detailed per-cycle reservation tables.
These will all live side-by-side. Any subtarget can use any
combination of them. Instruction itineraries will not change in the
near term. In the long run, I expect them to only be relevant for
in-order VLIW machines that have complex contraints and require a
precise scheduling/bundling model. Once itineraries are only actively
used by VLIW-ish targets, they could be replaced by something more
appropriate for those targets.
This tablegen backend rewrite sets things up for introducing
MachineModel type #2: per opcode/operand cost model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159891 91177308-0d34-0410-b5e6-96231b3b80d8
