This adds support for TLS data relocations and modifiers:
.quad target@dtpmod
.quad target@tprel
.quad target@dtprel
Currently exploited by the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185394 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Benjamin Kramer!
Use the BlockFrequency class instead of floats in the Hopfield network
computations. This rescales the node Bias field from a [-2;2] float
range to two block frequencies BiasN and BiasP pulling in opposite
directions. This construct has a more predictable behavior when block
frequencies saturate.
The per-node scaling factors are no longer necessary, assuming the block
frequencies around a bundle are consistent.
This patch can cause the register allocator to make different spilling
decisions. The differences should be small.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185393 91177308-0d34-0410-b5e6-96231b3b80d8
Restrict the current TLS support to X86 ELF for now. Test that we don't
produce it on PPC & we can flesh that test case out with the right thing
once someone implements it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185389 91177308-0d34-0410-b5e6-96231b3b80d8
Change assert("text") to assert(0 && "text"). The first case is a const char *
to bool conversion, which always evaluates to true, never triggering the
assert. The second case will always trigger the assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185227 91177308-0d34-0410-b5e6-96231b3b80d8
Based on GCC's output for TLS variables (OP_constNu, x@dtpoff,
OP_lo_user), this implements debug info support for TLS in ELF. Verified
that this output is correct/sufficient on Linux (using gold - if you're
using binutils-ld, you'll need something with the fix for
http://sourceware.org/bugzilla/show_bug.cgi?id=15685 in it).
Support on non-ELF is sort of "arbitrary" at the moment - if Apple folks
want to discuss (or just go ahead & implement) how this should work in
MachO, etc, I'm open.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185203 91177308-0d34-0410-b5e6-96231b3b80d8
- Build debug metadata for 'bare' Modules using DIBuilder
- DebugIR can be constructed to generate an IR file (to be seen by a debugger)
or not in cases where the user already has an IR file on disk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185193 91177308-0d34-0410-b5e6-96231b3b80d8
Allow a BlockFrequency to be divided by a non-zero BranchProbability
with saturating arithmetic. This will be used to compute the frequency
of a loop header given the probability of leaving the loop.
Our long division algorithm already saturates on overflow, so that was a
freebie.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185184 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r185099.
Looks like both the ppc-64 and mips bots are still failing after I reverted this
change.
Since:
1. The mips bot always performs a clean build,
2. The ppc64-bot failed again after a clean build (I asked the ppc-64
maintainers to clean the bot which they did... Thanks Will!),
I think it is safe to assume that this change was not the cause of the failures
that said builders were seeing. Thus I am recomitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185111 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r185095. This is causing a FileCheck failure on
the 3dnow intrinsics on at least the mips/ppc bots but not on the x86
bots.
Reverting while I figure out what is going on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185099 91177308-0d34-0410-b5e6-96231b3b80d8
The category which an APFloat belongs to should be dependent on the
actual value that the APFloat has, not be arbitrarily passed in by the
user. This will prevent inconsistency bugs where the category and the
actual value in APFloat differ.
I also fixed up all of the references to this constructor (which were
only in LLVM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185095 91177308-0d34-0410-b5e6-96231b3b80d8
algorithm when assigning EnumValues to the synthesized registers.
The current algorithm, LessRecord, uses the StringRef compare_numeric
function. This function compares strings, while handling embedded numbers.
For example, the R600 backend registers are sorted as follows:
T1
T1_W
T1_X
T1_XYZW
T1_Y
T1_Z
T2
T2_W
T2_X
T2_XYZW
T2_Y
T2_Z
In this example, the 'scaling factor' is dEnum/dN = 6 because T0, T1, T2
have an EnumValue offset of 6 from one another. However, in other parts
of the register bank, the scaling factors are different:
dEnum/dN = 5:
KC0_128_W
KC0_128_X
KC0_128_XYZW
KC0_128_Y
KC0_128_Z
KC0_129_W
KC0_129_X
KC0_129_XYZW
KC0_129_Y
KC0_129_Z
The diff lists do not work correctly because different kinds of registers have
different 'scaling factors'. This new algorithm, LessRecordRegister, tries to
enforce a scaling factor of 1. For example, the registers are now sorted as
follows:
T1
T2
T3
...
T0_W
T1_W
T2_W
...
T0_X
T1_X
T2_X
...
KC0_128_W
KC0_129_W
KC0_130_W
...
For the Mips and R600 I see a 19% and 6% reduction in size, respectively. I
did see a few small regressions, but the differences were on the order of a
few bytes (e.g., AArch64 was 16 bytes). I suspect there will be even
greater wins for targets with larger register files.
Patch reviewed by Jakob.
rdar://14006013
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185094 91177308-0d34-0410-b5e6-96231b3b80d8
There are a few valid situation where we care about the structure inside a
directory, but not about the directory itself. A simple example is for unit
testing directory traversal.
PathV1 had a function like this, add one to V2 and port existing users of the
created temp file and delete it hack to using it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185059 91177308-0d34-0410-b5e6-96231b3b80d8
The Builtin attribute is an attribute that can be placed on function call site that signal that even though a function is declared as being a builtin,
rdar://problem/13727199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185049 91177308-0d34-0410-b5e6-96231b3b80d8
This patch modifies TableGen to generate a function in
${TARGET}GenInstrInfo.inc called getNamedOperandIdx(), which can be used
to look up indices for operands based on their names.
In order to activate this feature for an instruction, you must set the
UseNamedOperandTable bit.
For example, if you have an instruction like:
def ADD : TargetInstr <(outs GPR:$dst), (ins GPR:$src0, GPR:$src1)>;
You can look up the operand indices using the new function, like this:
Target::getNamedOperandIdx(Target::ADD, Target::OpName::dst) => 0
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src0) => 1
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src1) => 2
The operand names are case sensitive, so $dst and $DST are considered
different operands.
This change is useful for R600 which has instructions with a large number
of operands, many of which model single bit instruction configuration
values. These configuration bits are common across most instructions,
but may have a different operand index depending on the instruction type.
It is useful to have a convenient way to look up the operand indices,
so these bits can be generically set on any instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184879 91177308-0d34-0410-b5e6-96231b3b80d8
Add VK_... values and relocation types necessary to support
the @got family of modifiers. Used by the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184860 91177308-0d34-0410-b5e6-96231b3b80d8
This is a band-aid to fix the most severe regressions we're seeing from basing
spill decisions on block frequencies, until we have a better solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184835 91177308-0d34-0410-b5e6-96231b3b80d8
Representing enumerators by int64 instead of uint64 for now. At some
point we need to address the underlying issue of representation
depending on the specific enumeration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184761 91177308-0d34-0410-b5e6-96231b3b80d8
CGSCC pass manager. This should insulate the inlining decisions from the
vectorization decisions, however it may have both compile time and code
size problems so it is just an experimental option right now.
Adding this based on a discussion with Arnold and it seems at least
worth having this flag for us to both run some experiments to see if
this strategy is workable. It may solve some of the regressions seen
with the loop vectorizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184698 91177308-0d34-0410-b5e6-96231b3b80d8