declaration. GCC 4.7 appears to get hopelessly confused by declaring
this function within a member function of a class template. Go figure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206152 91177308-0d34-0410-b5e6-96231b3b80d8
abstract interface. The only user of this functionality is the JIT
memory manager and it is quite happy to have a custom type here. This
removes a virtual function call and a lot of unnecessary abstraction
from the common case where this is just a *very* thin vaneer around
a call to malloc.
Hopefully still no functionality changed here. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206149 91177308-0d34-0410-b5e6-96231b3b80d8
slabs rather than embedding a singly linked list in the slabs
themselves. This has a few advantages:
- Better utilization of the slab's memory by not wasting 16-bytes at the
front.
- Simpler allocation strategy by not having a struct packed at the
front.
- Avoids paging every allocated slab in just to traverse them for
deallocating or dumping stats.
The latter is the really nice part. Folks have complained from time to
time bitterly that tearing down a BumpPtrAllocator, even if it doesn't
run any destructors, pages in all of the memory allocated. Now it won't.
=]
Also resolves a FIXME with the scaling of the slab sizes. The scaling
now disregards specially sized slabs for allocations larger than the
threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206147 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for file auxiliary symbol entries in COFF symbol tables. A COFF
symbol table with a FILE entry is followed by sizeof(__FILE__) / 18 auxiliary
symbol records which contain the filename. Read them and form the original
filename that the record contains. Then display the name in the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206126 91177308-0d34-0410-b5e6-96231b3b80d8
Moves redundant template parameters into an implementation detail of
BlockFrequencyInfoImpl.
No functionality change.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206084 91177308-0d34-0410-b5e6-96231b3b80d8
This is a shared implementation class for BlockFrequencyInfo and
MachineBlockFrequencyInfo, not for BlockFrequency, a related (but
distinct) class.
No functionality change.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206083 91177308-0d34-0410-b5e6-96231b3b80d8
MCDisassembler has an MCSymbolizer member that is meant to take care of
symbolizing during disassembly, but it also has several methods that enable the
disassembler to do symbolization internally (i.e. without an attached symbolizer
object). There is no need for this duplication, but ARM64 had been making use of
it. This patch moves the ARM64 symbolization logic out of ARM64Disassembler and
into an ARM64ExternalSymbolizer class, and removes the duplicated MCSymbolizer
functionality from the MCDisassembler interface. Symbolization will now be
done exclusively through MCSymbolizers.
There should be no impact on disassembly for any platform, but this allows us to
tidy up the MCDisassembler interface and simplify the process of (and invariants
related to) disassembler setup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206063 91177308-0d34-0410-b5e6-96231b3b80d8
This code has been moved to a new function in the TargetLowering
class called expandMUL(). The purpose of this is to be able
to share lowering code between the SelectionDAGLegalize and
DAGTypeLegalizer classes.
No functionality changed intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206036 91177308-0d34-0410-b5e6-96231b3b80d8
The patch implements support for both relocation record formats: Elf_Rel
and Elf_Rela. It is possible to define relocation against symbol only.
Relocations against sections will be implemented later. Now yaml2obj
recognizes X86_64, MIPS and Hexagon relocation types.
Example of relocation section specification:
Sections:
- Name: .text
Type: SHT_PROGBITS
Content: "0000000000000000"
AddressAlign: 16
Flags: [SHF_ALLOC]
- Name: .rel.text
Type: SHT_REL
Info: .text
AddressAlign: 4
Relocations:
- Offset: 0x1
Symbol: glob1
Type: R_MIPS_32
- Offset: 0x2
Symbol: glob2
Type: R_MIPS_CALL16
The patch reviewed by Michael Spencer, Sean Silva, Shankar Easwaran.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206017 91177308-0d34-0410-b5e6-96231b3b80d8
Also updated as many loops as I could find using df_begin/idf_begin -
strangely I found no uses of idf_begin. Is that just used out of tree?
Also a few places couldn't use df_begin because either they used the
member functions of the depth first iterators or had specific ordering
constraints (I added a comment in the latter case).
Based on a patch by Jim Grosbach. (Jim - you just had iterator_range<T>
where you needed iterator_range<idf_iterator<T>>)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206016 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to have been a cargo-culted habit from the very first such
cache which didn't have any specific justification (but might've been a
layering constraint at the time).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206003 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the -segmented-stacks command line flag in favor of a
per-function "split-stack" attribute.
Patch by Luqman Aden and Alex Crichton!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205997 91177308-0d34-0410-b5e6-96231b3b80d8
Move the iterators into the range the same way the range's ctor moves
them into the members.
Also remove some redundant top level parens in the return statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205993 91177308-0d34-0410-b5e6-96231b3b80d8
To support compressing the debug_line section that contains multiple
fragments (due, I believe, to variation in choices of line table
encoding depending on the size of instruction ranges in the actual
program code) we needed to support compressing multiple MCFragments in a
single pass.
This patch implements that behavior by mutating the post-relaxed and
relocated section to be the compressed form of its former self,
including renaming the section.
This is a more flexible (and less invasive, to a degree) implementation
that will allow for other features such as "use compression only if it's
smaller than the uncompressed data".
Compressing debug_frame would be a possible further extension to this
work, but I've left it for now. The hurdle there is alignment sections -
which might require going as far as to refactor
MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an
MCObjectWriter (there's already a virtual call there, so it shouldn't
add substantial compile-time cost) which could in turn involve
refactoring MCAsmBackend::writeNopData to use that same abstraction...
which involves touching all the backends. This would remove the limited
handling of fragment writing seen in
ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's
more invasive.
I did discover that I (perhaps obviously) don't need to handle
relocations when I rewrite the fragments - since the relocations have
already been applied and computed (and stored into
ELFObjectWriter::Relocations) by this stage (necessarily, because we
need to have written any immediate values or assembly-time relocations
into the data already before we compress it, which we have). The test
case doesn't necessarily cover that in detail - I can add more test
coverage if that's preferred.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205990 91177308-0d34-0410-b5e6-96231b3b80d8
To support compression for debug_line and debug_frame a different
approach is required. To simplify review, revert the old implementation
and XFAIL the test case. New implementation to follow shortly.
Reverts r205059 and r204958.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205989 91177308-0d34-0410-b5e6-96231b3b80d8
Convenience wrapper to make dealing with sub-ranges easier. Like the
iterator_range<> itself, if/when this sort of thing gets standards
blessing, it will be replaced by the official version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205987 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r205974, it turns out that this wasn't such a great idea
after all. Using DIVariable as return value is self-documenting and marginally
more type safe.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205979 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce ScalarTraits::mustQuote which determines whether or not a
StringRef needs quoting before it is acceptable to output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205955 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds intrinsics and codegen support for the surface read/write and texture read instructions that take an explicit sampler parameter. Codegen operates on image handles at the PTX level, but falls back to direct replacement of handles with kernel arguments if image handles are not enabled. Note that image handles are explicitly disabled for all target architectures in this change (to be enabled later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205907 91177308-0d34-0410-b5e6-96231b3b80d8
The vectorizer only knows how to vectorize intrinics by widening all operands by
the same factor.
Patch by Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205855 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds backend support for -Rpass=, which indicates the name
of the optimization pass that should emit remarks stating when it
made a transformation to the code.
Pass names are taken from their DEBUG_NAME definitions.
When emitting an optimization report diagnostic, the lack of debug
information causes the diagnostic to use "<unknown>:0:0" as the
location string.
This is the back end counterpart for
http://llvm-reviews.chandlerc.com/D3226
Reviewers: qcolombet
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205774 91177308-0d34-0410-b5e6-96231b3b80d8
The IO normalizer would essentially lump I386 and AMD64 relocations
together. Relocation types with the same numeric value would then get
mapped in appropriately.
For example:
IMAGE_REL_AMD64_ADDR64 and IMAGE_REL_I386_DIR16 both have a numeric
value of one. We would see IMAGE_REL_I386_DIR16 in obj2yaml conversions
of object files with a machine type of IMAGE_FILE_MACHINE_AMD64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205746 91177308-0d34-0410-b5e6-96231b3b80d8
Using this file would result in an odr violation: it defines an llvm::Interval
class that conflicts with the one in Analysis/Interval.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205726 91177308-0d34-0410-b5e6-96231b3b80d8
It affected callee's stack pop in x86. It is one of devergences between cygwin and mingw since mingw-gcc-4.6.
Added testcases to llvm/test/CodeGen/X86/win32_sret.ll for cygwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205688 91177308-0d34-0410-b5e6-96231b3b80d8
I really should read the spec more often (and test GCC more often too).
I just assumed that namespace aliases would be the same as using
directives, except with a name. But apparently that's not how the DWARF
standards suggests they be implemented. DWARF4 provides an example and
other non-normative text suggesting that namespace aliases be
implemented by named imported declarations intsead of named imported
modules.
So be it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205685 91177308-0d34-0410-b5e6-96231b3b80d8
