Commit Graph

265 Commits

Author SHA1 Message Date
Rafael Espindola
48381e5d20 Regenerate configure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149391 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-31 17:18:47 +00:00
Sebastian Pop
6e9b5eb51b revert r147542 after comments from Joerg Sonnenberger
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147608 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-05 18:28:46 +00:00
Sebastian Pop
8a86887ba3 use getHostTriple instead of getDefaultTargetTriple in getClosestTargetForJIT
Get back getHostTriple.

For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147542 91177308-0d34-0410-b5e6-96231b3b80d8
2012-01-04 19:47:22 +00:00
Tony Linthicum
b4b54153ad Hexagon backend support
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146412 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-12 21:14:40 +00:00
Daniel Dunbar
4ab406d7fc LLVMBuild: Remove trailing newline, which irked me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146409 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-12 19:48:00 +00:00
Daniel Dunbar
a3a2dfd4a2 build: Add initial cut at LLVMBuild.txt files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143634 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-03 18:53:17 +00:00
Sebastian Pop
de2e0b5e6d rename LLVM_HOSTTRIPLE into LLVM_DEFAULT_TARGET_TRIPLE
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143501 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-01 21:31:44 +00:00
Sebastian Pop
c4cbf4a6a4 derive LLVM_HOSTTRIPLE from target
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143500 91177308-0d34-0410-b5e6-96231b3b80d8
2011-11-01 21:30:04 +00:00
Dan Gohman
33ba8b0e96 Remove the Alpha backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143164 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-27 22:56:32 +00:00
Daniel Dunbar
b42d47605b projects/sample: Switch over to imported Makefile setup.
- This will require you to manually reconfigure the projects/sample project (by running projects/config/sample/config.status --recheck) if you haven't updated/built since the 1st part of this commit went in.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143148 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-27 21:25:09 +00:00
Eric Christopher
360fa9a29d Handle newer cases for freebsd which is approaching 10.0 and not 1.0.
Patch by Dimitry Andric!

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142995 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-26 00:42:12 +00:00
Dan Gohman
3e6157de57 Remove the Blackfin backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142880 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-25 00:05:42 +00:00
Dan Gohman
29074ccf6c Remove the SystemZ backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142878 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-24 23:48:32 +00:00
Daniel Dunbar
bf79f91941 Regenerate projects/sample/configure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142457 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-18 23:10:58 +00:00
Daniel Dunbar
2532fa21a9 projects/sample: Import adapted form of current LLVM autoconf/Makefile setup so that projects/sample is standalone and not tied to the LLVM build setup.
- This currently just moves over all of the behavior from LLVM. Eventually all of the configure checks that are directly needed by the LLVM build setup should probably go away, and the project should manage their own configuration checks if necessary.

 - This is the 1st half of this work, the actual Makefile.common hasn't moved over yet. I've tried to stage this in such a way that incremental builds will properly reconfigure for most active developers (the Makefiles don't handle reconfiguring in a perfectly reliable way, and I haven't found an easy way to make them do so).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142456 91177308-0d34-0410-b5e6-96231b3b80d8
2011-10-18 23:10:47 +00:00
Chris Lattner
7a2bdde0a0 Fix a ton of comment typos found by codespell. Patch by
Luis Felipe Strano Moraes!



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129558 91177308-0d34-0410-b5e6-96231b3b80d8
2011-04-15 05:18:47 +00:00
Peter Collingbourne
2bf4b54a80 Regen configure
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121646 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-12 21:42:01 +00:00
Peter Collingbourne
1fbf5a492e Fix paths; AutoRegen.sh changes its current working directory to be the
autoconf directory, but these paths need to be relative to the main
source directory.  Patch originally by Dan Gohman, r67655.

Also, cause configure.ac to find absolute paths to LLVM source and
object trees.   Together, fixes PR1220.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121645 91177308-0d34-0410-b5e6-96231b3b80d8
2010-12-12 21:41:56 +00:00
Michael J. Spencer
3cc52ea33c I swear I did a make clean and make before committing all this...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120304 91177308-0d34-0410-b5e6-96231b3b80d8
2010-11-29 18:47:54 +00:00
Daniel Dunbar
9b8cc2bc56 projects: Don't try to build libcxx if one happens to have it checked out into
llvm/projects.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113490 91177308-0d34-0410-b5e6-96231b3b80d8
2010-09-09 15:49:32 +00:00
Eric Christopher
31a0a4318b Remove bogus link.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108518 91177308-0d34-0410-b5e6-96231b3b80d8
2010-07-16 06:33:36 +00:00
Jakob Stoklund Olesen
04c528a0c8 Remove many calls to TII::isMoveInstr. Targets should be producing COPY anyway.
TII::isMoveInstr is going tobe completely removed.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108507 91177308-0d34-0410-b5e6-96231b3b80d8
2010-07-16 04:45:42 +00:00
Wesley Peck
15c4bb926f Testing subversion commit access
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96948 91177308-0d34-0410-b5e6-96231b3b80d8
2010-02-23 15:11:17 +00:00
Oscar Fuentes
f6814754e8 CMake: Fixed syntax in conditional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96221 91177308-0d34-0410-b5e6-96231b3b80d8
2010-02-15 15:17:05 +00:00
Jakob Stoklund Olesen
4b42a1e40f Oops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95670 91177308-0d34-0410-b5e6-96231b3b80d8
2010-02-09 17:24:21 +00:00
Jakob Stoklund Olesen
8addca2f3a clang test suite
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@95667 91177308-0d34-0410-b5e6-96231b3b80d8
2010-02-09 17:20:03 +00:00
Eric Christopher
1f1092920a Fix autoconf llvm srcdir location for generic projects.
Patch by Torvald Riegel!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94405 91177308-0d34-0410-b5e6-96231b3b80d8
2010-01-25 04:10:28 +00:00
Daniel Dunbar
50a5aa19ca CMake: Don't try to descend into projects/compiler-rt, it doesn't work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94187 91177308-0d34-0410-b5e6-96231b3b80d8
2010-01-22 18:14:27 +00:00
Daniel Dunbar
d58816f898 Don't try to build compiler-rt if it happens to be checked out into projects/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93729 91177308-0d34-0410-b5e6-96231b3b80d8
2010-01-18 17:52:28 +00:00
Chandler Carruth
8b67f774e9 Move DataTypes.h to include/llvm/System, update all users. This breaks the last
direct inclusion edge from System to Support.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85086 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-26 01:35:46 +00:00
Torok Edwin
6493798d83 install-sh chmods to 0755 by default, and this causes 'git diff' to show
that all the Makefiles changed mode.
Fix this by tellint install-sh to chmod
only to 0644, these are not executable files after all!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80371 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-28 16:12:48 +00:00
Chris Lattner
929a49356e remove dead makefile flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74065 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-24 05:29:56 +00:00
Dan Gohman
324f608a45 Revert r67655 and r67656, as they are breaking the build. I'm
not going to persue this further at this time.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67666 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-25 00:52:11 +00:00
Dan Gohman
2594706ef7 LLVM's master Makefile.common is in LLVM_SRC_ROOT, not LLVM_OBJ_ROOT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67658 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-25 00:09:05 +00:00
Dan Gohman
d02a281aa5 Regenerate configure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67656 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 23:47:11 +00:00
Dan Gohman
497e863c74 Fix paths; AutoRegen.sh changes its current working directory to be the
autoconf directory, but these paths need to be relative to the main
source directory.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67655 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 23:46:25 +00:00
Dan Gohman
c9ebae3389 Update for autoconf 2.6x;
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67654 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 23:45:13 +00:00
Dan Gohman
9f16bcb59f Fix bash-isms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67647 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-24 20:21:37 +00:00
Oscar Fuentes
5c6bf65a09 CMake: auto-discover project files under the projects/ subdirectory.
Patch by Viktar Zviarovich!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66230 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-06 01:16:52 +00:00
Nick Lewycky
206b59acf0 Add "sample" documentation to sample project.
This fixes part of PR2793.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56198 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-15 05:31:29 +00:00
Matthijs Kooijman
5b80c663e7 Allow the test suite to be checked out into projects/test-suite.
We will keep the old projects/llvm-test working for existing installs.

The changes to configure are made manually, since I lack autoconf-2.6. Someone
might want to run AutoGen.sh to see if that changes anything.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52675 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-24 13:01:57 +00:00
Chris Lattner
57360d1f1c remove attributions from the rest of the llvm makefiles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45416 91177308-0d34-0410-b5e6-96231b3b80d8
2007-12-29 20:11:13 +00:00
John Criswell
e644ef7b09 Convert .cvsignore files
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37801 91177308-0d34-0410-b5e6-96231b3b80d8
2007-06-29 16:35:07 +00:00
Chris Lattner
9bc823ec54 avoid collision with /usr/bin/sample if this ever gets installed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34387 91177308-0d34-0410-b5e6-96231b3b80d8
2007-02-18 03:03:41 +00:00
Chris Lattner
de8dacf759 remove obsolete comment
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33292 91177308-0d34-0410-b5e6-96231b3b80d8
2007-01-17 05:26:57 +00:00
Reid Spencer
d203342a59 For PR1074:
Remove the projects/Stacker directory. LLVM is now free of dependency
on llvm-gcc.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33278 91177308-0d34-0410-b5e6-96231b3b80d8
2007-01-17 02:18:44 +00:00
Chris Lattner
f1d71b537c relax type
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32993 91177308-0d34-0410-b5e6-96231b3b80d8
2007-01-07 08:39:27 +00:00
Reid Spencer
db8d2bed6a For PR950:
Convert signed integer types to signless.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32786 91177308-0d34-0410-b5e6-96231b3b80d8
2006-12-31 05:50:28 +00:00
Reid Spencer
e4d87aa2de For PR950:
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32751 91177308-0d34-0410-b5e6-96231b3b80d8
2006-12-23 06:05:41 +00:00
Chris Lattner
2edc43f02d switch statistic over, remove misspelt comment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32704 91177308-0d34-0410-b5e6-96231b3b80d8
2006-12-19 23:03:41 +00:00
Reid Spencer
e922eb6f17 Update for llvm-gcc4 build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32533 91177308-0d34-0410-b5e6-96231b3b80d8
2006-12-13 08:03:25 +00:00
Reid Spencer
31b628ba60 Change createInferredCast calls to more accurate cast creation calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32520 91177308-0d34-0410-b5e6-96231b3b80d8
2006-12-13 00:47:58 +00:00
Bill Wendling
e81561909d Changed llvm_ostream et all to OStream. llvm_cerr, llvm_cout, llvm_null, are
now cerr, cout, and NullStream resp.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32298 91177308-0d34-0410-b5e6-96231b3b80d8
2006-12-07 01:30:32 +00:00
Devang Patel
dead99bc81 Detemplatize the Statistic class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32283 91177308-0d34-0410-b5e6-96231b3b80d8
2006-12-06 19:00:27 +00:00
Bill Wendling
68fe61d6a1 Replacing std::iostreams with llvm iostreams. Some of these changes involve
adding a temporary wrapper around the ostream to make it friendly to
functions expecting an LLVM stream. This should be fixed in the future.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31990 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-29 00:19:40 +00:00
Reid Spencer
3da59db637 For PR950:
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31931 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-27 01:05:10 +00:00
Reid Spencer
3822ff5c71 For PR950:
This patch converts the old SHR instruction into two instructions,
AShr (Arithmetic) and LShr (Logical). The Shr instructions now are not
dependent on the sign of their operands.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31542 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-08 06:47:33 +00:00
Reid Spencer
12565159bf Don't check variables before they are set.
Be careful about blanks when checking LLVMGCC variable.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31455 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-05 03:58:44 +00:00
Reid Spencer
19d220419a Make sample project -pedantic clean.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31391 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-03 00:09:53 +00:00
Reid Spencer
939c6872c5 Make Stacker Runtime -pedantic clean.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31390 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-03 00:08:08 +00:00
Reid Spencer
3ed469ccd7 For PR786:
Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31380 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-02 20:25:50 +00:00
Reid Spencer
0a783f783c For PR950:
Replace the REM instruction with UREM, SREM and FREM.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31369 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-02 01:53:59 +00:00
Reid Spencer
1628cec4d7 For PR950:
Make necessary changes to support DIV -> [SUF]Div. This changes llvm to
have three division instructions: signed, unsigned, floating point. The
bytecode and assembler are bacwards compatible, however.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31195 91177308-0d34-0410-b5e6-96231b3b80d8
2006-10-26 06:15:43 +00:00
Reid Spencer
b83eb6447b For PR950:
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31063 91177308-0d34-0410-b5e6-96231b3b80d8
2006-10-20 07:07:24 +00:00
Reid Spencer
76907e3daf Don't build the runtime library if LLVMGCC is not configured.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30691 91177308-0d34-0410-b5e6-96231b3b80d8
2006-10-02 19:10:56 +00:00
Chris Lattner
0d59c03432 Stacker doesn't build universal right.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@30675 91177308-0d34-0410-b5e6-96231b3b80d8
2006-09-30 00:24:20 +00:00
Chris Lattner
463b79f5d1 Fix a race condition in the makefile that broke grawp's tester last night.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29873 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-25 17:15:23 +00:00
Reid Spencer
40bb451c94 For PR797:
Update to reflect ParseException becoming ParseError (from Parser.h)


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29766 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-18 09:07:54 +00:00
Reid Spencer
b08b562ecf Drop the -s2048 option, it is specified incorrectly and the correct
specification can't be handled by llvmc (= confuses it)


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29764 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-18 09:00:22 +00:00
Reid Spencer
42fe455d37 For PR780:
1. Change the usage of LOADABLE_MODULE so that it implies all the things
   necessary to make a loadable module. This reduces the user's burdern to
   get a loadable module correctly built.
2. Document the usage of LOADABLE_MODULE in the MakefileGuide
3. Adjust the makefile for lib/Transforms/Hello to use the new specification
   for building loadable modules
4. Adjust the sample project to not attempt to build a shared library for
   its little library. This was just wasteful and not instructive at all.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29551 91177308-0d34-0410-b5e6-96231b3b80d8
2006-08-07 23:12:15 +00:00
Chris Lattner
3251973d4a Stacker uses EH.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29032 91177308-0d34-0410-b5e6-96231b3b80d8
2006-07-07 00:20:39 +00:00
Chris Lattner
831b121039 Don't pass target name into TargetData anymore, it is never used or needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28831 91177308-0d34-0410-b5e6-96231b3b80d8
2006-06-16 18:23:49 +00:00
Chris Lattner
1969e3ce98 Fix build on systems with broken bison
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28658 91177308-0d34-0410-b5e6-96231b3b80d8
2006-06-02 18:21:11 +00:00
Reid Spencer
72f42bbc9b For PR786:
Turn -pedantic and -Wno-long-long compile flags on by default. In a few
places, avoid the warnings by removing these options in the local makefile.
One notable exception: lib/Target/CBackend/Writer.cpp. These warnings are
left on as a reminder to developers to clean them up.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28614 91177308-0d34-0410-b5e6-96231b3b80d8
2006-06-01 01:55:21 +00:00
Reid Spencer
18c8b49e7d Use archive libraries instead of object files for VMCore, BCReader,
BCWriter, and bzip2 libraries. Adjust the various makefiles to accommodate
these changes. This was done to speed up link times.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28610 91177308-0d34-0410-b5e6-96231b3b80d8
2006-06-01 01:30:27 +00:00
Chris Lattner
433698bbbc Avoid defining dead result
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28246 91177308-0d34-0410-b5e6-96231b3b80d8
2006-05-12 17:29:40 +00:00
Reid Spencer
30ea4787ea Have the AutoRegen.sh script prompt the user for the LLVM src and obj
directories if it can't find them. Then, replace those values into the
configure.ac script and pass them to the LLVM_CONFIG_PROJECT so that the
values become the default for llvm_src and llvm_obj variables. In this way
the user is required to input this exactly once, and the scripts take it
from there.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27798 91177308-0d34-0410-b5e6-96231b3b80d8
2006-04-18 06:27:47 +00:00
Reid Spencer
9b6e67e1ec Distribute the Stacker samples directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27648 91177308-0d34-0410-b5e6-96231b3b80d8
2006-04-13 06:16:37 +00:00
Reid Spencer
898f44b06a Distribute the lex/yacc files from the cvs version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27628 91177308-0d34-0410-b5e6-96231b3b80d8
2006-04-12 20:55:23 +00:00
Reid Spencer
5a4b9e7b5f Ignored generated files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27016 91177308-0d34-0410-b5e6-96231b3b80d8
2006-03-23 23:53:13 +00:00
Reid Spencer
31c4d82800 Ignore generated files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27015 91177308-0d34-0410-b5e6-96231b3b80d8
2006-03-23 23:51:43 +00:00
Chris Lattner
fb4ab00d09 Convert over to the new way of handling lex/bison checked into cvs
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26209 91177308-0d34-0410-b5e6-96231b3b80d8
2006-02-15 07:26:07 +00:00
Robert Bocchino
6b2b0136a9 Fixed Makefile so it does, indeed, build a dynamic library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25135 91177308-0d34-0410-b5e6-96231b3b80d8
2006-01-06 22:51:19 +00:00
Chris Lattner
36a6338133 unbreak the build again
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24041 91177308-0d34-0410-b5e6-96231b3b80d8
2005-10-27 16:30:44 +00:00
Chris Lattner
8962b84556 Make sure to build things in the right order, build with the .o file, not the
.a file to unbreak the build after john's change


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24024 91177308-0d34-0410-b5e6-96231b3b80d8
2005-10-27 00:53:16 +00:00
Chris Lattner
f582dde143 use archives when possible
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23932 91177308-0d34-0410-b5e6-96231b3b80d8
2005-10-24 01:52:15 +00:00
Reid Spencer
68a24bdba4 Implement PR614:
These changes modify the makefiles so that the output of flex and bison are
placed in the SRC directory, not the OBJ directory. It is intended that they
be checked in as any other LLVM source so that platforms without convenient
access to flex/bison can be compiled. From now on, if you change a .y or
.l file you *must* also commit the generated .cpp and .h files.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23115 91177308-0d34-0410-b5e6-96231b3b80d8
2005-08-27 18:50:39 +00:00
Andrew Lenharth
3027321a76 oops
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22334 91177308-0d34-0410-b5e6-96231b3b80d8
2005-07-05 16:36:18 +00:00
Andrew Lenharth
c2640d0d9e updates
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22333 91177308-0d34-0410-b5e6-96231b3b80d8
2005-07-05 15:18:33 +00:00
Reid Spencer
4411eebff2 Make the value to -s not be interpreted as a file name
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22134 91177308-0d34-0410-b5e6-96231b3b80d8
2005-05-19 01:05:02 +00:00
Reid Spencer
9daa061293 Add an llvmc specification file for the "st" suffix. This allows Stacker
programs to benefit from the optimization capabilities of the llvmc.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22133 91177308-0d34-0410-b5e6-96231b3b80d8
2005-05-19 00:54:10 +00:00
Reid Spencer
37f13809ec The previous hack didn't work because tools-only isn't defined and isn't
a target at this level of build. There shouldn't be a problem with building
the runtime library without llvm-gcc because the Makefile.rules checks
for an empty LLVMGCC variable before building bytecode modules.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21942 91177308-0d34-0410-b5e6-96231b3b80d8
2005-05-13 17:42:54 +00:00
Reid Spencer
08f5535aaa Don't build runtime if tools-only :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21938 91177308-0d34-0410-b5e6-96231b3b80d8
2005-05-13 16:17:58 +00:00
Reid Spencer
535c619e2b WHILE does not "pop" a value, it "examines" to top of stack. Make this
clear in the applicable comment.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21682 91177308-0d34-0410-b5e6-96231b3b80d8
2005-05-04 15:33:48 +00:00
Jeff Cohen
b02fbfc485 Eliminate tabs and trailing spaces
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21479 91177308-0d34-0410-b5e6-96231b3b80d8
2005-04-23 21:26:11 +00:00
Misha Brukman
fd93908ae8 Remove trailing whitespace
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21427 91177308-0d34-0410-b5e6-96231b3b80d8
2005-04-21 23:48:37 +00:00
Alkis Evlogimenos
ab7ada3ed6 Rename createPromoteMemoryToRegister() to
createPromoteMemoryToRegisterPass() to be consistent with other pass
creation functions.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20885 91177308-0d34-0410-b5e6-96231b3b80d8
2005-03-28 02:01:12 +00:00
Reid Spencer
421ec0554d Update to reflect various changes in the autoconf directory. THe
recommended configuration of projects is now much simplified and depends
on LLVM file presence rather than local project file presence.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20312 91177308-0d34-0410-b5e6-96231b3b80d8
2005-02-24 18:53:47 +00:00
Reid Spencer
bcb178fbe6 Remove auxilliary files that are now picked up from llvm/autoconf. This
avoids version conflict problems with ltmain.sh (libtool), mkinstalldirs
and install-sh. This prevents projects from becoming stale when the LLVM
build system is upgraded or modified.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20311 91177308-0d34-0410-b5e6-96231b3b80d8
2005-02-24 18:52:22 +00:00
Reid Spencer
1a87ddc03b * Move all the "standard" configuration stuff to the start of the file
* Make the auxilliary directory be llvm/autoconf not the project's
* Use the LLVM_CONFIG_PROJECT macro to get the --with-llvm{src,obj} args


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20310 91177308-0d34-0410-b5e6-96231b3b80d8
2005-02-24 18:50:53 +00:00