The buildbots are still not satisfied.
MIPS and ARM are failing (even though at least MIPS was expected to pass).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237245 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
The first two times this was committed (r229831, r233055), it caused several buildbot failures.
At least some of the ARM and MIPS ones were due to gcc/binutils issues, and should now be fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237234 91177308-0d34-0410-b5e6-96231b3b80d8
The code that builds the dependence graph assumes that two PseudoSourceValues
don't alias. In a tail calling function two FixedStackObjects might refer to the
same location. Worse 'immutable' fixed stack objects like function arguments are
not immutable and will be clobbered.
Change this so that a load from a FixedStackObject is not invariant in a tail
calling function and don't return a PseudoSourceValue for an instruction in tail
calling functions when building the dependence graph so that we handle function
arguments conservatively.
Fix for PR23459.
rdar://20740035
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236916 91177308-0d34-0410-b5e6-96231b3b80d8
We were accidentally folding a sign/zero extend in to address arithmetic in a different BB when the extend wasn't available there.
Cross BB fast-isel isn't safe, so restrict this to only when the extend is in the same BB as the use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236764 91177308-0d34-0410-b5e6-96231b3b80d8
The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236613 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236507 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike 32-bit ARM, AArch64 can use wzr/xzr to implement this without the need
for a separate instruction.
rdar://18679590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236245 91177308-0d34-0410-b5e6-96231b3b80d8
Finish off PR23080 by renaming the debug info IR constructs from `MD*`
to `DI*`. The last of the `DIDescriptor` classes were deleted in
r235356, and the last of the related typedefs removed in r235413, so
this has all baked for about a week.
Note: If you have out-of-tree code (like a frontend), I recommend that
you get everything compiling and tests passing with the *previous*
commit before updating to this one. It'll be easier to keep track of
what code is using the `DIDescriptor` hierarchy and what you've already
updated, and I think you're extremely unlikely to insert bugs. YMMV of
course.
Back to *this* commit: I did this using the rename-md-di-nodes.sh
upgrade script I've attached to PR23080 (both code and testcases) and
filtered through clang-format-diff.py. I edited the tests for
test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns
were off-by-three. It should work on your out-of-tree testcases (and
code, if you've followed the advice in the previous paragraph).
Some of the tests are in badly named files now (e.g.,
test/Assembler/invalid-mdcompositetype-missing-tag.ll should be
'dicompositetype'); I'll come back and move the files in a follow-up
commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236120 91177308-0d34-0410-b5e6-96231b3b80d8
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235989 91177308-0d34-0410-b5e6-96231b3b80d8
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235977 91177308-0d34-0410-b5e6-96231b3b80d8
This matches other assemblers and is less unexpected (e.g. PR23227).
On ELF, I tried binutils gas v2.24 and nasm 2.10.09, and they both
agree on LShr. On COFF, I couldn't get my hands on an assembler yet,
so don't change the behavior. For now, don't change it on non-AArch64
Darwin either, as the other assembler is gas v1.38, which does an AShr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235963 91177308-0d34-0410-b5e6-96231b3b80d8
After legalization, scalar SETCC has an i32 result type on AArch64.
The i1 requirement seems too conservative, replace it with an assert.
This also means that we now can run after legalization. That should also
be fine, since the ops legalizer runs again after each combine, and
all types created all have the same sizes as the (legal) inputs.
Exposed by r235917; while there, robustize its tests (bsl also uses the
register it defines).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235922 91177308-0d34-0410-b5e6-96231b3b80d8
When the setcc has f64 operands, we can't build a vector setcc mask
to feed a vselect, because f64 doesn't divide v3f32 evenly.
Just bail out when that happens.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235917 91177308-0d34-0410-b5e6-96231b3b80d8
AsmPrinter owns the OutStreamer, so an owning pointer makes sense here. Using a
reference for this is crufty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235752 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Constant stores of f16 vectors can create NvCast nodes from various
operand types to v4f16 or v8f16 depending on patterns in the stored
constants. This patch adds nvcast rules with v4f16 and v8f16 values.
AArchISelLowering::LowerBUILD_VECTOR has the details on which constant
patterns generate the nvcast nodes.
Reviewers: jmolloy, srhines, ab
Subscribers: rengolin, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D9201
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235610 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Set operation action for SINT_TO_FP and UINT_TO_FP nodes with v4i32,
v8i8, v8i16 inputs to allow promotion of v4f16 results.
Add tests for sitofp and uitofp for vec4, vec8, vec16, and i8, i16, i32,
and i64 vectors. Only missing tests are for v16i8 and v16i16 as the
shift operations are too complicated to write a proper check sequence.
The conversions from v4i64 to v4f16 do not depend on this patch - v4i64
is split and the conversion gets handled while lowering v2i64. I am
adding a test here for completeness.
Reviewers: aemerson, rengolin, ab, jmolloy, srhines
Subscribers: rengolin, aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D9166
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235609 91177308-0d34-0410-b5e6-96231b3b80d8
The CondOpt pass currently uses LiveIntervals to set the dead flag on a def. This patch uses MachineRegisterInfo::use_empty instead as that is equivalent to the def being dead.
This removes an instance of LiveIntervals in the pass manager pipeline and saves 3.8% of compile time on llc conpiled for AArch64.
Reviewed by Chad Rosier and Zhaoshi.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235532 91177308-0d34-0410-b5e6-96231b3b80d8
Enough concerns were raised that this optimization is pessimising some code patterns.
The obvious fix, to add a Reassociate run afterwards, causes even more pessimisation in some cases due to fewer complex addressing modes being matched. As there isn't a trivial fix for this, backing this out by default until someone gets a chance to fix the addressing mode matcher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235491 91177308-0d34-0410-b5e6-96231b3b80d8
The result is either an Untyped reg sequence, on ldN with N > 1, or
just the type of the input vector, on ld1. Don't force Untyped.
Instead, just use the type of the reg sequence.
This mirrors the behavior of createTuple, which feeds the LD1*_POST.
The narrow code path wasn't actually covered by tests, because V64
insert_vector_elt are widened to V128 before the LD1LANEpost combine
has the chance to run, usually.
The only case where it does run on V64 vectors is if the vector ops
legalizer ran. So, tickle the code with a ctpop.
Fixes PR23265.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235243 91177308-0d34-0410-b5e6-96231b3b80d8
They would break the SelectionDAG.
Note that the opposite load->vector dependency is already obvious in:
(LD1*post vec, ..)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235224 91177308-0d34-0410-b5e6-96231b3b80d8
Found by code inspection, but breaking i16 at least breaks other tests.
They aren't checking this in particular though, so also add some
explicit tests for the already working types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235148 91177308-0d34-0410-b5e6-96231b3b80d8
A big-endian vector return needs a byte-swap which we aren't doing right now.
For now just bail on these cases to get correctness back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235133 91177308-0d34-0410-b5e6-96231b3b80d8
In order to introduce v8.1a-specific entities, Mappers should be aware of SubtargetFeatures available.
This patch introduces refactoring, that will then allow to easily introduce:
- v8.1-specific "pan" PState for PStateMapper (PAN extension)
- v8.1-specific sysregs for SysRegMapper (LOR,VHE extensions)
Reviewers: jmolloy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8496
Patch by Tom Coxon
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235089 91177308-0d34-0410-b5e6-96231b3b80d8
The ARMv8 ARMARM states that for these instructions in A64 state:
"Unspecified bits in "imm5" are ignored but should be set to zero by an assembler.", (imm4 for INS).
Make the disassembler accept any encoding with these ignored bits set to 1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234896 91177308-0d34-0410-b5e6-96231b3b80d8
Gut all the non-pointer API from the variable wrappers, except an
implicit conversion from `DIGlobalVariable` to `DIDescriptor`. Note
that if you're updating out-of-tree code, `DIVariable` wraps
`MDLocalVariable` (`MDVariable` is a common base class shared with
`MDGlobalVariable`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234840 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234679 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, there's a single flag, checked by the pass itself.
It can't force-enable the pass (and is on by default), because it
might not even have been created, as that's the targets decision.
Instead, have separate explicit flags, so that the decision is
consistently made in the target.
Keep the flag as a last-resort "force-disable GlobalMerge" for now,
for backwards compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234666 91177308-0d34-0410-b5e6-96231b3b80d8
The spilled registers are pristine and thus, correctly handled by
the register scavenger and so on, but the liveness information is
strictly speaking wrong at this point.
Fix that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234664 91177308-0d34-0410-b5e6-96231b3b80d8
Using SchedAliases is convenient and works well for latency and resource
lookup for instructions. However, this creates an entry in
AArch64WriteLatencyTable with a WriteResourceID of 0, breaking any
SchedReadAdvance since the lookup will fail.
http://reviews.llvm.org/D8043
Patch by Dave Estes <cestes@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234594 91177308-0d34-0410-b5e6-96231b3b80d8
