Commit Graph

3898 Commits

Author SHA1 Message Date
Lang Hames
59d454959f Rename fp-op fusion option (yet again) for compatibility with GCC option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159042 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-22 22:31:00 +00:00
Evan Cheng
df42d41cd6 Forgot this patch in r159023.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159028 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-22 20:30:39 +00:00
Lang Hames
e023141322 Rename -allow-excess-fp-precision flag to -fuse-fp-ops, and switch from a
boolean flag to an enum: { Fast, Standard, Strict } (default = Standard).

This option controls the creation by optimizations of fused FP ops that store
intermediate results in higher precision than IEEE allows (E.g. FMAs). The
behavior of this option is intended to match the behaviour specified by a
soon-to-be-introduced frontend flag: '-ffuse-fp-ops'.

Fast mode - allows formation of fused FP ops whenever they're profitable.

Standard mode - allow fusion only for 'blessed' FP ops. At present the only
blessed op is the fmuladd intrinsic. In the future more blessed ops may be
added.

Strict mode - allow fusion only if/when it can be proven that the excess
precision won't effect the result.

Note: This option only controls formation of fused ops by the optimizers.  Fused
operations that are explicitly requested (e.g. FMA via the llvm.fma.* intrinsic)
will always be honored, regardless of the value of this option.

Internally TargetOptions::AllowExcessFPPrecision has been replaced by
TargetOptions::AllowFPOpFusion.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158956 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-22 01:09:09 +00:00
Nadav Rotem
7060221ae2 llvm-stress: Stabalize (by using an ordered container) and add randomness to the order in which loops are generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158908 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-21 08:58:15 +00:00
Lang Hames
d693cafcfb Add DAG-combines for aggressive FMA formation.
This patch adds DAG combines to form FMAs from pairs of FADD + FMUL or
FSUB + FMUL. The combines are performed when:
(a) Either
      AllowExcessFPPrecision option (-enable-excess-fp-precision for llc)
        OR
      UnsafeFPMath option (-enable-unsafe-fp-math)
    are set, and
(b) TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) is true for the type of
    the FADD/FSUB, and
(c) The FMUL only has one user (the FADD/FSUB).

If your target has fast FMA instructions you can make use of these combines by
overriding TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) to return true for
types supported by your FMA instruction, and adding patterns to match ISD::FMA
to your FMA instructions.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158757 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-19 22:51:23 +00:00
Rafael Espindola
d6b43a317e Move the support for using .init_array from ARM to the generic
TargetLoweringObjectFileELF. Use this to support it on X86. Unlike ARM,
on X86 it is not easy to find out if .init_array should be used or not, so
the decision is made via TargetOptions and defaults to off.

Add a command line option to llc that enables it.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158692 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-19 00:48:28 +00:00
Bill Wendling
e68470a1e4 Remove assignments which aren't used afterwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158534 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-15 19:28:20 +00:00
Rafael Espindola
4f81768d44 Use LTO_CODEGEN_PIC_MODEL_DYNAMIC for PIE. This requirest a git version of
gold to work. Since the enum value LDPO_PIE has just been added to plugin-api.h,
use a numeric constant for now so that we don't require an unreleased
version of gold to build.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158402 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-13 13:30:24 +00:00
Benjamin Kramer
773ef61299 Object file output from llc isn't experimental anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158305 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-11 09:40:10 +00:00
Michael J. Spencer
4d61664696 [llvm-nm] Update documentation to cover object file support and arguments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158120 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-06 23:34:10 +00:00
Benjamin Kramer
95a9d93772 Round 2 of dead private variable removal.
LLVM is now -Wunused-private-field clean except for
- lib/MC/MCDisassembler/Disassembler.h. Not sure why it keeps all those unaccessible fields.
- gtest.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158096 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-06 19:47:08 +00:00
Benjamin Kramer
a7542d5f87 Remove unused private fields found by clang's new -Wunused-private-field.
There are some that I didn't remove this round because they looked like
obvious stubs. There are dead variables in gtest too, they should be
fixed upstream.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158090 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-06 18:25:08 +00:00
David Blaikie
4f56a30e0d Reinstate -O3 for LTO.
This broke in r144788 when the CodeGenOpt option was moved from everywhere else
(specifically, from addPassesToEmitFile) to createTargetMachine. Since
LTOCodeGenerator wasn't passing the 4th argument, when the 4th parameter became
the 3rd, it silently continued to compile (int->bool conversion) but meant
something completely different.

This change preserves the existing (accidental) and previous (default)
semantics of the addPassesToEmitFile and restores the previous/intended
CodeGenOpt argument by passing it appropriately to createTargetMachine.

(discovered by pending changes to -Wconversion to catch constant->bool
conversions)

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157705 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-30 18:42:51 +00:00
Bob Wilson
6e1b812850 Add an insertPass API to TargetPassConfig. <rdar://problem/11498613>
Besides adding the new insertPass function, this patch uses it to
enhance the existing -print-machineinstrs so that the MachineInstrs
after a specific pass can be printed.

Patch by Bin Zeng!

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157655 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-30 00:17:12 +00:00
Stepan Dyatkovskiy
0aa32d5d0f ConstantRangesSet renamed to IntegersSubset. CRSBuilder renamed to IntegersSubsetMapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157612 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-29 12:26:47 +00:00
Benjamin Kramer
6514551be7 Plug a leak when using MCJIT.
Found by valgrind.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157160 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-20 17:24:08 +00:00
Benjamin Kramer
223f2a72da Remove extra semicolons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157118 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-19 16:44:12 +00:00
Stepan Dyatkovskiy
f4c261b137 Ordinary PR1255 patch: DifferenceEngine and CPPBackend adopted to the new SwitchInst methods.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157112 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-19 13:14:30 +00:00
Jim Grosbach
3e96531186 Refactor data-in-code annotations.
Use a dedicated MachO load command to annotate data-in-code regions.
This is the same format the linker produces for final executable images,
allowing consistency of representation and use of introspection tools
for both object and executable files.

Data-in-code regions are annotated via ".data_region"/".end_data_region"
directive pairs, with an optional region type.

data_region_directive := ".data_region" { region_type }
region_type := "jt8" | "jt16" | "jt32" | "jta32"
end_data_region_directive := ".end_data_region"

The previous handling of ARM-style "$d.*" labels was broken and has
been removed. Specifically, it didn't handle ARM vs. Thumb mode when
marking the end of the section.

rdar://11459456

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157062 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-18 19:12:01 +00:00
Kevin Enderby
59c15e920c Fixed a bug in llvm-objdump when disassembling using -macho option for a binary
containing no symbols.  Fixed the crash and fixed it not disassembling anything.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157031 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-18 00:13:56 +00:00
Danil Malyshev
068c65b22d Added LLIMCJITMemoryManager to the lli. This manager will be used for MCJIT instead of DefaultJIMMemoryManager.
It's more flexible for MCJIT tasks, in addition it's provides a invalidation instruction cache for code sections which will be used before JIT code will be executed.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156933 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-16 18:50:11 +00:00
Chandler Carruth
8bc3434e68 Teach the 'opt' tool about '-Os' and '-Oz', corresponding to the Clang
options, to enable easier testing of the innards of LLVM that are
enabled by such optimization strategies.

Note that this doesn't provide the (much needed) function attribute
support for -Oz (as opposed to -Os), but still seems like a positive
step to better test the logic that Clang currently relies on.

Patch by Patrik Hägglund.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156913 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-16 08:32:49 +00:00
Daniel Dunbar
40d65dc305 llvm-config: Use sys::fs::equivalent instead of string comparison.
- Hopefully fixes PR11600 (untested).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156865 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-15 22:07:18 +00:00
Kevin Enderby
41854aea66 Fixed a bug in llvm-objdump when disassembling using -macho option for a binary
that has more than one symbol.  The last symbol was not being disassembled to
the end of the section.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156840 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-15 18:57:14 +00:00
Daniel Dunbar
b5cd41e26f llvm-build: Add support for non-installed libraries (e.g., gtest).
- These libraries are only reported by llvm-config when run from a development
   tree.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156838 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-15 18:44:17 +00:00
Jim Grosbach
918f55fe23 Allow MCCodeEmitter access to the target MCRegisterInfo.
Add the MCRegisterInfo to the factories and constructors.

Patch by Tom Stellard <Tom.Stellard@amd.com>.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156828 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-15 17:35:52 +00:00
Rafael Espindola
383fd7afd9 Fix a use after free when the streamer is destroyed. Fixes pr12622.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156606 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-11 03:42:13 +00:00
Bob Wilson
6447d52ba8 Do not install llvm-config-host for cross-builds of clang. rdar://11317847
My previous change to install llvm-config-host for cross-builds resulted
in that file being installed even when the normal llvm-config was not
installed, e.g., when building the install-clang target.  Daniel suggested
this alternative, which solves the immediate problem and also avoids the gunk
in the top-level makefile.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156448 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-09 00:07:02 +00:00
Kevin Enderby
9ed9e5d0f9 Fix it so llvm-objdump -arch does accept x86 and x86-64 as valid arch names.
PR12731.  Patch by Meador Inge!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156444 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-08 23:38:45 +00:00
Chandler Carruth
99650c9088 Move the CodeExtractor utility to a dedicated header file / source file,
and expose it as a utility class rather than as free function wrappers.

The simple free-function interface works well for the bugpoint-specific
pass's uses of code extraction, but in an upcoming patch for more
advanced code extraction, they simply don't expose a rich enough
interface. I need to expose various stages of the process of doing the
code extraction and query information to decide whether or not to
actually complete the extraction or give up.

Rather than build up a new predicate model and pass that into these
functions, just take the class that was actually implementing the
functions and lift it up into a proper interface that can be used to
perform code extraction. The interface is cleaned up and re-documented
to work better in a header. It also is now setup to accept the blocks to
be extracted in the constructor rather than in a method.

In passing this essentially reverts my previous commit here exposing
a block-level query for eligibility of extraction. That is no longer
necessary with the more rich interface as clients can query the
extraction object for eligibility directly. This will reduce the number
of walks of the input basic block sequence by quite a bit which is
useful if this enters the normal optimization pipeline.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156163 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-04 10:18:49 +00:00
Pete Cooper
ff204963cb PR12729: Change 'llvm-objdump' to display the available targets.
Patch by Meador Inge.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156128 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-03 23:20:10 +00:00
John McCall
9679f0f357 Fix unintentional use of operator bool.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155978 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-02 05:39:10 +00:00
Eli Bendersky
30183bf042 Remove redundant line (the memory manager is set above to the same object
if !ForceInterpreteri). It has no effect (apart from a memory leak...)




git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155792 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-29 11:14:59 +00:00
Evan Cheng
0d5c32327a DumpSegment64Command() wasn't returning correct result. Caught by static analyzer. rdar://11329354
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155669 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-26 22:07:28 +00:00
Michael J. Spencer
3c00db75e1 [CMake] Restructure how Clang, Polly and other external projects get included.
While making lld build under the tools directory I decided to refactor how this
works.

There is now a macro, add_llvm_external_project, which takes the name of the
expected subdirectory. This sets up two CMake options.

 * LLVM_EXTERNAL_${NAME}_SOURCE_DIR
     This is the path to the source. It defaults to
     ${CMAKE_CURRENT_SOURCE_DIR}/${name}.
 * LLVM_EXTERNAL_${NAME}_BUILD
     Enable and disable building the tool as part of LLVM.

I chose LLVM_EXTERNAL_${NAME} as a prefix so they all show up together in the
GUI.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155654 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-26 19:43:35 +00:00
Chris Lattner
fa1059fd9c openbsd doesn't support soname, patch by Brad Smith!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155536 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-25 06:37:20 +00:00
Michael J. Spencer
75338097c7 Remove llvm-ld and llvm-stub (which is only used by llvm-ld).
llvm-ld is no longer useful and causes confusion and so it is being removed.

* Does not work very well on Windows because it must call a gcc like driver to
  assemble and link.
* Has lots of hard coded paths which are wrong on many systems.
* Does not understand most of ld's options.
* Can be partially replaced by llvm-link | opt | {llc | as, llc -filetype=obj} |
  ld, or fully replaced by Clang.

I know of no production use of llvm-ld, and hacking use should be
replaced by Clang's driver.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155147 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-19 19:27:54 +00:00
Nick Lewycky
9a1484165c Move the JIT flags from llc to lli. These flags showed up as part of moving
backend flags in TargetOptions.h into their own class in r145714.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154993 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-18 08:34:12 +00:00
Joe Groff
e652b521f9 allow opt to take a -mtriple option
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154959 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-17 23:05:48 +00:00
Richard Barton
d0c478d95f Add -disassemble support for -show-inst and -show-encode capability llvm-mc. Also refactor so all MC paraphernalia are created once for all uses as much as possible.
The test change is to account for the fact that the default disassembler behaviour has changed with regards to specifying the assembly syntax to use.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154809 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-16 11:32:10 +00:00
Rafael Espindola
4d2e9d9a1c Remove lto_codegen_set_whole_program_optimization. It is a work in progress,
so we don't want it to show up in the stable 3.1 interface.

While at it, add a comment about why LTOCodeGenerator manually creates the
internalize pass.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154807 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-16 10:58:38 +00:00
Craig Topper
fb22ede033 Make member variables of AsmToken private. Remove unnecessary forward declarations. Remove an unnecessary include.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154775 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-15 22:00:22 +00:00
Nadav Rotem
7d719a5237 Do not convert between fp128 <-> ppc_fp128 since there is no legal cast conversion between the two.
Patch by nobled <nobled@dreamwidth.org>



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154772 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-15 20:17:14 +00:00
Sylvestre Ledru
6fc30c26b7 Fix the build under Debian GNU/Hurd.
Thanks to Pino Toscano for the patch



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154500 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-11 15:35:36 +00:00
Dylan Noblesmith
83f17f25fc llvm-stress: stop abusing ConstantFP::get()
ConstantFP::get(Type*, double) is unreliably host-specific:
it can't handle a type like PPC128 on an x86 host. It even
has a comment to that effect: "This should only be used for
simple constant values like 2.0/1.0 etc, that are
known-valid both as host double and as the target format."

Instead, use APFloat. While we're at it, randomize the floating
point value more thoroughly; it was previously limited
to the range 0 to 2**19 - 1.

PR12451.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154446 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-10 22:44:51 +00:00
Dylan Noblesmith
701de8fafc llvm-stress: don't make vectors of x86_mmx type
LangRef.html says:
"There are no arrays, vectors or constants of this type."

This was hitting assertions when passing the -generate-x86-mmx
option.

PR12452.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154445 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-10 22:44:49 +00:00
Bill Wendling
64fae7587a Revert the 'EnableInitializing' flag. There is debate on whether we should run that pass by default in LTO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154356 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-09 23:16:51 +00:00
Bill Wendling
64d5b282c9 Apply the scope restrictions after parsing the command line options. There may be some which are used in that function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154348 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-09 22:18:01 +00:00
Bill Wendling
a3706d6754 s/lto_codegen_whole_program_optimization/lto_codegen_set_whole_program_optimization/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154312 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-09 08:32:21 +00:00
Bill Wendling
3029a0c56a Add a hook to turn on the internalize pass through the LTO interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154306 91177308-0d34-0410-b5e6-96231b3b80d8
2012-04-09 05:26:48 +00:00