SmallDenseMap::swap.
First, make it parse cleanly. Yay for uninstantiated methods.
Second, make the inline-buckets case work correctly. This is way
trickier than it should be due to the uninitialized values in empty and
tombstone buckets.
Finally fix a few typos that caused construction/destruction mismatches
in the counting unittest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158641 91177308-0d34-0410-b5e6-96231b3b80d8
destruction and fix a bug in SmallDenseMap they caught.
This is kind of a poor-man's version of the testing that just adds the
addresses to a set on construction and removes them on destruction. We
check that double construction and double destruction don't occur.
Amusingly enough, this is enough to catch a lot of SmallDenseMap issues
because we spend a lot of time with fixed stable addresses in the inline
buffer.
The SmallDenseMap bug fix included makes grow() not double-destroy in
some cases. It also fixes a FIXME there, the code was pretty crappy. We
now don't have any wasted initialization, but we do move the entries in
inline bucket array an extra time. It's probably a better tradeoff, and
is much easier to get correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158639 91177308-0d34-0410-b5e6-96231b3b80d8
implementation.
This type includes an inline bucket array which is used initially. Once
it is exceeded, an array of 64 buckets is allocated on the heap. The
bucket count grows from there as needed. Some highlights of this
implementation:
- The inline buffer is very carefully aligned, and so supports types
with alignment constraints.
- It works hard to avoid aliasing issues.
- Supports types with non-trivial constructors, destructors, copy
constructions, etc. It works reasonably hard to minimize copies and
unnecessary initialization. The most common initialization is to set
keys to the empty key, and so that should be fast if at all possible.
This class has a performance / space trade-off. It tries to optimize for
relatively small maps, and so packs the inline bucket array densely into
the object. It will be marginally slower than a normal DenseMap in a few
use patterns, so it isn't appropriate everywhere.
The unit tests for DenseMap have been generalized a bit to support
running over different map implementations in addition to different
key/value types. They've then been automatically extended to cover the
new container through the magic of GoogleTest's typed tests.
All of this is still a bit rough though. I'm going to be cleaning up
some aspects of the implementation, documenting things better, and
adding tests which include non-trivial types. As soon as I'm comfortable
with the correctness, I plan to switch existing users of SmallMap over
to this class as it is already more correct w.r.t. construction and
destruction of objects iin the map.
Thanks to Benjamin Kramer for all the reviews of this and the lead-up
patches. That said, more review on this would really be appreciated. As
I've noted a few times, I'm quite surprised how hard it is to get the
semantics for a hashtable-based map container with a small buffer
optimization correct. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158638 91177308-0d34-0410-b5e6-96231b3b80d8
platforms.
Also, remove one assertion on MSVC because it produces a completely
preposterous result, claiming something needs 12-byte alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158599 91177308-0d34-0410-b5e6-96231b3b80d8
array of a suitable size and alignment for any of a number of different
types to be stored into the character array.
The mechanisms for producing an explicitly aligned type are fairly
complex because this operation is poorly supported on all compilers.
We've spent a fairly significant amount of time experimenting with
different implementations inside of Google, and the one using explicitly
expanded templates has been the most robust.
Credit goes to Nick Lewycky for writing the first 20 versions or so of
this logic we had inside of Google. I based this on the only one to
actually survive. In case anyone is worried, yes we are both explicitly
re-contributing and re-licensing it for LLVM. =]
Once the issues with actually specifying the alignment are finished, it
turns out that most compilers don't in turn align anything the way they
are instructed. Testing of this logic against both Clang and GCC
indicate that the alignment constraints are largely ignored by both
compilers! I've come up with and used a work-around by wrapping each
alignment-hinted type directly in a struct, and using that struct to
align the character array through a union. This elaborate hackery is
terrifying, but I've included testing that caught a terrifying number of
bugs in every other technique I've tried.
All of this in order to implement a poor C++98 programmers emulation of
C++11 unrestricted unions in classes such as SmallDenseMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158597 91177308-0d34-0410-b5e6-96231b3b80d8
of typename. GCC and Clang were fine with this, but MSVC won't accept
it. Fortunately, it also doesn't need it. Yuck.
Thanks to Nakamura for pointing this out in IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158593 91177308-0d34-0410-b5e6-96231b3b80d8
These were already trying to be type parameterized over different
key/value pairs. I've realized this goal using GoogleTest's typed test
functionality. This allows us to easily replicate the tests across
different key/value combinations and soon different mapping templates.
I've fixed a few bugs in the tests and extended them a bit in the
process as many tests were only applying to the int->int mapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158589 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM is now -Wunused-private-field clean except for
- lib/MC/MCDisassembler/Disassembler.h. Not sure why it keeps all those unaccessible fields.
- gtest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158096 91177308-0d34-0410-b5e6-96231b3b80d8
Changed type of Items collection: from std::vector to std::list.
Also some small fixes made in IntegersSubset.h, IntegersSubsetMapping.h and IntegersSubsetTest.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157987 91177308-0d34-0410-b5e6-96231b3b80d8
Returning a temporary BitVector is very expensive. If you must, create
the temporary explicitly: Use BitVector(A).flip() instead of ~A.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156768 91177308-0d34-0410-b5e6-96231b3b80d8
- FlatArrayMap. Very simple map container that uses flat array inside.
- MultiImplMap. Map container interface, that has two modes, one for small amount of elements and one for big amount.
- SmallMap. SmallMap is DenseMap compatible MultiImplMap. It uses FlatArrayMap for small mode, and DenseMap for big mode.
Also added unittests for new classes and update for ProgrammersManual.
For more details about new classes see ProgrammersManual and comments in sourcecode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155557 91177308-0d34-0410-b5e6-96231b3b80d8
This nicely handles the most common case of virtual register sets, but
also handles anticipated cases where we will map pointers to IDs.
The goal is not to develop a completely generic SparseSet
template. Instead we want to handle the expected uses within llvm
without any template antics in the client code. I'm adding a bit of
template nastiness here, and some assumption about expected usage in
order to make the client code very clean.
The expected common uses cases I'm designing for:
- integer keys that need to be reindexed, and may map to additional
data
- densely numbered objects where we want pointer keys because no
number->object map exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155227 91177308-0d34-0410-b5e6-96231b3b80d8
through the use of 'fpmath' metadata. Currently this only provides a 'fpaccuracy'
value, which may be a number in ULPs or the keyword 'fast', however the intent is
that this will be extended with additional information about NaN's, infinities
etc later. No optimizations have been hooked up to this so far.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154822 91177308-0d34-0410-b5e6-96231b3b80d8
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153241 91177308-0d34-0410-b5e6-96231b3b80d8
1. Declare a virtual function getPointerToNamedFunction() in JITMemoryManager
2. Move the implementation of getPointerToNamedFunction() form JIT/MCJIT to DefaultJITMemoryManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153205 91177308-0d34-0410-b5e6-96231b3b80d8
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152620 91177308-0d34-0410-b5e6-96231b3b80d8
integral and enumeration types. This is accomplished with a bit of
template type trait magic. Thanks to Richard Smith for the core idea
here to detect viable types by detecting the set of types which can be
default constructed in a template parameter.
This is used (in conjunction with a system for detecting nullptr_t
should it exist) to provide an is_integral_or_enum type trait that
doesn't need a whitelist or direct compiler support.
With this, the hashing is extended to the more general facility. This
will be used in a subsequent commit to hashing more things, but I wanted
to make sure the type trait magic went through the build bots separately
in case other compilers don't like this formulation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152217 91177308-0d34-0410-b5e6-96231b3b80d8
This currently assumes that both sets have the same SmallSize to keep the implementation simple,
a limitation that can be lifted if someone cares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152143 91177308-0d34-0410-b5e6-96231b3b80d8
just ensure that the number of bytes in the pair is the sum of the bytes
in each side of the pair. As long as thats true, there are no extra
bytes that might be padding.
Also add a few tests that previously would have slipped through the
checking. The more accurate checking mechanism catches these and ensures
they are handled conservatively correctly.
Thanks to Duncan for prodding me to do this right and more simply.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151891 91177308-0d34-0410-b5e6-96231b3b80d8
hashable data. This matters when we have pair<T*, U*> as a key, which is
quite common in DenseMap, etc. To that end, we need to detect when this
is safe. The requirements on a generic std::pair<T, U> are:
1) Both T and U must satisfy the existing is_hashable_data trait. Note
that this includes the requirement that T and U have no internal
padding bits or other bits not contributing directly to equality.
2) The alignment constraints of std::pair<T, U> do not require padding
between consecutive objects.
3) The alignment constraints of U and the size of T do not conspire to
require padding between the first and second elements.
Grow two somewhat magical traits to detect this by forming a pod
structure and inspecting offset artifacts on it. Hopefully this won't
cause any compilers to panic.
Added and adjusted tests now that pairs, even nested pairs, are treated
as just sequences of data.
Thanks to Jeffrey Yasskin for helping me sort through this and reviewing
the somewhat subtle traits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151883 91177308-0d34-0410-b5e6-96231b3b80d8
an open question of whether we can do better than this by treating pairs
as boring data containers and directly hashing the two subobjects. This
at least makes the API reasonable.
In order to make this change, I reorganized the header a bit. I lifted
the declarations of the hash_value functions up to the top of the header
with their doxygen comments as these are intended for users to interact
with. They shouldn't have to wade through implementation details. I then
defined them at the very end so that they could be defined in terms of
hash_combine or any other hashing infrastructure.
Added various pair-hashing unittests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151882 91177308-0d34-0410-b5e6-96231b3b80d8
the hash_code. I'm not sure what I was thinking here, the use cases for
special values are in the *keys*, not in the hashes of those keys.
We can always resurrect this if needed, or clients can accomplish the
same goal themselves. This makes the general case somewhat faster (~5
cycles faster on my machine) and smaller with less branching.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151865 91177308-0d34-0410-b5e6-96231b3b80d8
to keep this around -- updating golden tests is annoying otherwise.
Thanks to Benjamin for pointing this omission out on IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151860 91177308-0d34-0410-b5e6-96231b3b80d8
of the proposed standard hashing interfaces (N3333), and to use
a modified and tuned version of the CityHash algorithm.
Some of the highlights of this change:
-- Significantly higher quality hashing algorithm with very well
distributed results, and extremely few collisions. Should be close to
a checksum for up to 64-bit keys. Very little clustering or clumping of
hash codes, to better distribute load on probed hash tables.
-- Built-in support for reserved values.
-- Simplified API that composes cleanly with other C++ idioms and APIs.
-- Better scaling performance as keys grow. This is the fastest
algorithm I've found and measured for moderately sized keys (such as
show up in some of the uniquing and folding use cases)
-- Support for enabling per-execution seeds to prevent table ordering
or other artifacts of hashing algorithms to impact the output of
LLVM. The seeding would make each run different and highlight these
problems during bootstrap.
This implementation was tested extensively using the SMHasher test
suite, and pased with flying colors, doing better than the original
CityHash algorithm even.
I've included a unittest, although it is somewhat minimal at the moment.
I've also added (or refactored into the proper location) type traits
necessary to implement this, and converted users of GeneralHash over.
My only immediate concerns with this implementation is the performance
of hashing small keys. I've already started working to improve this, and
will continue to do so. Currently, the only algorithms faster produce
lower quality results, but it is likely there is a better compromise
than the current one.
Many thanks to Jeffrey Yasskin who did most of the work on the N3333
paper, pair-programmed some of this code, and reviewed much of it. Many
thanks also go to Geoff Pike Pike and Jyrki Alakuijala, the original
authors of CityHash on which this is heavily based, and Austin Appleby
who created MurmurHash and the SMHasher test suite.
Also thanks to Nadav, Tobias, Howard, Jay, Nick, Ahmed, and Duncan for
all of the review comments! If there are further comments or concerns,
please let me know and I'll jump on 'em.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151822 91177308-0d34-0410-b5e6-96231b3b80d8
chip in r139383, and the PSP components of the triple are really
annoying to parse. Let's leave this chapter behind. There is no reason
to expect LLVM to see a PSP-related triple these days, and so no
reasonable motivation to support them.
It might be reasonable to prune a few of the older MIPS triple forms in
general, but as those at least cause no burden on parsing (they aren't
both a chip and an OS!), I'm happy to leave them in for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151156 91177308-0d34-0410-b5e6-96231b3b80d8
For objects that can be identified by small unsigned keys, SparseSet
provides constant time clear() and fast deterministic iteration. Insert,
erase, and find operations are typically faster than hash tables.
SparseSet is useful for keeping information about physical registers,
virtual registers, or numbered basic blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151110 91177308-0d34-0410-b5e6-96231b3b80d8
construction. Simplify its interface, implementation, and users
accordingly as there is no longer an 'uninitialized' state to check for.
Also, fixes a bug lurking in the interface as there was one method that
didn't correctly check for initialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151024 91177308-0d34-0410-b5e6-96231b3b80d8
some architectures. These are useful for interacting with multiarch or
bi-arch GCC (or GCC-based) toolchains.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149895 91177308-0d34-0410-b5e6-96231b3b80d8
now that this handles the release / retain calls.
Adds a regression test for that bug (which is a compile-time
regression) and for the last two changes to the IntrusiveRefCntPtr,
especially tests for the memory leak due to copy construction of the
ref-counted object and ensuring that the traits are used for release /
retain calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149411 91177308-0d34-0410-b5e6-96231b3b80d8
BitVector uses the native word size for its internal representation.
That doesn't work well for literal bit masks in source code.
This patch adds BitVector operations to efficiently apply literal bit
masks specified as arrays of uint32_t. Since each array entry always
holds exactly 32 bits, these portable bit masks can be source code
literals, probably produced by TableGen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148272 91177308-0d34-0410-b5e6-96231b3b80d8
Move to a by-section allocation and relocation scheme. This allows
better support for sections which do not contain externally visible
symbols.
Flesh out the relocation address vs. local storage address separation a
bit more as well. Remote process JITs use this to tell the relocation
resolution code where the code will live when it executes.
The startFunctionBody/endFunctionBody interfaces to the JIT and the
memory manager are deprecated. They'll stick around for as long as the
old JIT does, but the MCJIT doesn't use them anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148258 91177308-0d34-0410-b5e6-96231b3b80d8
is testing the bitcode reader's functionality, not VMCore's. Add the
what is a hope sufficient build system mojo to build and run a new
unittest.
Also clean up some of the test's naming. The goal for the file should be
to unittest the Bitcode Reader, and this is just one particular test
among potentially many in the future. Also, reverse my position and
relegate the PR# to a comment, but stash the comment on the same line as
the test name so it doesn't get lost. This makes the code more
self-documenting hopefully w/o losing track of the PR number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147431 91177308-0d34-0410-b5e6-96231b3b80d8
build. This didn't show up in the CMake build because the CMake build
for the unittests is rather poorly factored.
This probably isn't the correct fix. This should be a bitcode reader
unittest not a VMCore unittest. I'll move it and clean various parts of
the unittest up in a follow-up patch, but I wanted to unbreak the bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147427 91177308-0d34-0410-b5e6-96231b3b80d8
Diagnostics are now emitted via the SourceMgr and we use MemoryBuffer
for buffer management. Switched the code to make use of the trailing
'0' that MemoryBuffer guarantees where it makes sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147063 91177308-0d34-0410-b5e6-96231b3b80d8
make VariadicFunction actually be trivial. Do so, and also make it look
more like your standard trivial functor by making it a struct with no
access specifiers. The unit test is updated to initialize its functors
properly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146827 91177308-0d34-0410-b5e6-96231b3b80d8
variadic-like functions in C++98. See the comments in the header file
for a more detailed description of how these work. We plan to use these
extensively in the AST matching library. This code and idea were
originally authored by Zhanyong Wan. I've condensed it using macros
to reduce repeatition and adjusted it to fit better with LLVM's ADT.
Thanks to both David Blaikie and Doug Gregor for the review!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146729 91177308-0d34-0410-b5e6-96231b3b80d8
I have run these tests under many configurations on the exact same OS as
the failures, and I can't reproduce them :(.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146214 91177308-0d34-0410-b5e6-96231b3b80d8
was returning incorrect values in rare cases, and incorrectly marking
exact conversions as inexact in some more common cases. Fixes PR11406, and a
missed optimization in test/CodeGen/X86/fp-stack-O0.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145141 91177308-0d34-0410-b5e6-96231b3b80d8
These annotations are disabled entirely when either ENABLE_THREADS is off, or
building a release build. When enabled, they add calls to functions with no
statements to ManagedStatic's getters.
Use these annotations to inform tsan that the race used inside ManagedStatic
initialization is actually benign. Thanks to Kostya Serebryany for helping
write this patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144567 91177308-0d34-0410-b5e6-96231b3b80d8
Add a test case for the edge case that triggers this. Thanks to Chandler for bringing this to my attention.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142794 91177308-0d34-0410-b5e6-96231b3b80d8
the X86 asmparser to produce ranges in the one case that was annoying me, for example:
test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
^~~~~~~
It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use
ranges where appropriate if someone is interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142106 91177308-0d34-0410-b5e6-96231b3b80d8
Based on Horspool's simplified version of Boyer-Moore. We use a constant-sized table of
uint8_ts to keep cache thrashing low, needles bigger than 255 bytes are uncommon anyways.
The worst case is still O(n*m) but we do a lot better on the average case now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142061 91177308-0d34-0410-b5e6-96231b3b80d8
It is an endian-aware helper that can read data from a StringRef. It will
come in handy for DWARF parsing. This class is inspired by LLDB's
DataExtractor, but is stripped down to the bare minimum needed for DWARF.
Comes with unit tests!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139626 91177308-0d34-0410-b5e6-96231b3b80d8
In the case of EDInstInfo, this would actually cause a bug when -1 became 255
and was then compared >=0 in llvm-mc/Disassembler.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138825 91177308-0d34-0410-b5e6-96231b3b80d8
The APFloat "Zero" test was actually calling the
APFloat(const fltSemantics &, integerPart) constructor, and EXPECT_EQ was
treating 0 and -0 as equal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138745 91177308-0d34-0410-b5e6-96231b3b80d8
whatever the size of unsigned is), though this can't actually
occur for any integer value of NUM_NODES.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136460 91177308-0d34-0410-b5e6-96231b3b80d8
more graphs, like all graphs with 5 nodes or less. With a 32 bit
unsigned type, the maximum is graphs with 6 nodes or less, but that
would take a while to test - 5 nodes or less already requires a few
seconds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136354 91177308-0d34-0410-b5e6-96231b3b80d8
This computes every graph with 4 or fewer nodes, and checks that the SCC
class indeed returns exactly the simply connected components reachable
from the initial node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136351 91177308-0d34-0410-b5e6-96231b3b80d8
errors like the one corrected by r135261. Migrate all LLVM callers of the old
constructor to the new one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135431 91177308-0d34-0410-b5e6-96231b3b80d8
an assert on Darwin llvm-gcc builds.
Assertion failed: (castIsValid(op, S, Ty) && "Invalid cast!"), function Create, file /Users/buildslave/zorg/buildbot/smooshlab/slave-0.8/build.llvm-gcc-i386-darwin9-RA/llvm.src/lib/VMCore/Instructions.cpp, li\
ne 2067.
etc.
http://smooshlab.apple.com:8013/builders/llvm-gcc-i386-darwin9-RA/builds/2354
--- Reverse-merging r134893 into '.':
U include/llvm/Target/TargetData.h
U include/llvm/DerivedTypes.h
U tools/bugpoint/ExtractFunction.cpp
U unittests/Support/TypeBuilderTest.cpp
U lib/Target/ARM/ARMGlobalMerge.cpp
U lib/Target/TargetData.cpp
U lib/VMCore/Constants.cpp
U lib/VMCore/Type.cpp
U lib/VMCore/Core.cpp
U lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Instrumentation/ProfilingUtils.cpp
U lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/CodeGen/SjLjEHPrepare.cpp
--- Reverse-merging r134888 into '.':
G include/llvm/DerivedTypes.h
U include/llvm/Support/TypeBuilder.h
U include/llvm/Intrinsics.h
U unittests/Analysis/ScalarEvolutionTest.cpp
U unittests/ExecutionEngine/JIT/JITTest.cpp
U unittests/ExecutionEngine/JIT/JITMemoryManagerTest.cpp
U unittests/VMCore/PassManagerTest.cpp
G unittests/Support/TypeBuilderTest.cpp
U lib/Target/MBlaze/MBlazeIntrinsicInfo.cpp
U lib/Target/Blackfin/BlackfinIntrinsicInfo.cpp
U lib/VMCore/IRBuilder.cpp
G lib/VMCore/Type.cpp
U lib/VMCore/Function.cpp
G lib/VMCore/Core.cpp
U lib/VMCore/Module.cpp
U lib/AsmParser/LLParser.cpp
U lib/Transforms/Utils/CloneFunction.cpp
G lib/Transforms/Utils/CodeExtractor.cpp
U lib/Transforms/Utils/InlineFunction.cpp
U lib/Transforms/Instrumentation/GCOVProfiling.cpp
U lib/Transforms/Scalar/ObjCARC.cpp
U lib/Transforms/Scalar/SimplifyLibCalls.cpp
U lib/Transforms/Scalar/MemCpyOptimizer.cpp
G lib/Transforms/IPO/DeadArgumentElimination.cpp
U lib/Transforms/IPO/ArgumentPromotion.cpp
U lib/Transforms/InstCombine/InstCombineCompares.cpp
U lib/Transforms/InstCombine/InstCombineAndOrXor.cpp
U lib/Transforms/InstCombine/InstCombineCalls.cpp
U lib/CodeGen/DwarfEHPrepare.cpp
U lib/CodeGen/IntrinsicLowering.cpp
U lib/Bitcode/Reader/BitcodeReader.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134949 91177308-0d34-0410-b5e6-96231b3b80d8
